Abstract This work reports the preparation of magnetic polymeric microspheres based on poly(methyl methacrylate) and the investigation of these materials as catalysts in heterogeneous Fenton processes for the decolorization of methyl orange (MO). The microspheres were prepared by polymerization of the magnetic material together with the monomers by aqueous suspension polymerization. The microspheres had specific surface area of 48.2 m2 g-1. Mossbauer data indicated that the magnetic material was a mixture of magnetite (31%), maghemite (21%), and goethite (48%). Fenton reactions were performed by varying the concentration of H2O2, pH, composite mass, and contact time. The highest color removal rates (around 80%) were reached at pH 3.0, 20% w/v of composite, 20 minutes contact time, and 10 ppm of H2O2. The composite could be reused during four cycles with removal efficiency above 50%. The results indicated that the adsorption and oxidation mechanisms act together determining the variation of the MO dye removal.

ResumoCopolímeros reticulados à base de divinilbenzeno vêm sendo extensivamente empregados como suportes de catalisadores e complexantes de íons metálicos, adsorventes de compostos orgânicos e fases estacionárias em separações cromatográficas. A introdução de grupos biocidas a estes materiais é relatada em patentes desde a década de 1970, contudo apenas a partir do ano 2000 estes copolímeros passaram a ser aplicados também como suportes para grupos biocidas. A presente revisão apresenta as principais combinações de suportes poliméricos e grupos biocidas estudados com o objetivo de preparar resinas biocidas reticuladas. Procura-se estabelecer relação entre as características dessas resinas e seu mecanismo de ação biocida.

AbstractCrosslinked copolymers of divinylbenzene have been extensively employed as supports for catalysts and chelating groups of metal ions, adsorbents of organic compounds and stationary phases for chromatography separations. The use of these copolymers as support for biocidal groups is reported in patents since the 1970s, but only after 2000 were these copolymers also applied as supports for biocidal groups. This paper describes the main combinations of polymeric supports and biocide groups employed in biocide polymer resins. The relationship between the characteristics of these resins and their mechanism of action is also established in this work.

In this work, noise and aromatic hydrocarbons levels of indoor and outdoor karting circuits located in Rio de Janeiro were assessed. The sampling was perfomed using active charcoal cartridges, followed by solvent desorption and analysis by gas chromatography with mass spectrometry detection. This study demonstrated that the karting circuits, venues for entertainment, were a major source of air pollution with the detection of considerable amounts of these compounds (2.0 to 19.7 µg m-3 of benzene; 4.1 to 41.1 µg m-3 of toluene; 2.8 to 36.2 µg m-3 of ethylbenzene; 0.7 to 36.2 µg m-3 of xylenes) and high noise levels.

The influence of temperature, storage time and the addition of hydrochloride L-cysteine in the preservation of the fungicide mancozeb was studied under field conditions in the surface layer of a Cambisol collected in an area planted with cabbage in Nova Friburgo - RJ, Brazil. The results of this study showed an efficiency of up to 42% in the preservation of the fungicide in the samples treated with cysteine and stored at low temperatures compared to those not treated and kept at room temperature

The use of the Fenton's reagent process has been investigated for the remediation of a Brazilian soil contaminated by diesel. Laboratory experiments were conducted in batch experiments. Slurries, consisting of 10 g of diesel-contaminated soil and 30 mL of Fenton's Reagent (0.41 mol L-1 H(2)0(2) and 0.18 mol L-1 FeSO4). The experiments were monitored during 24, 48 and 72 h. The efficiency of the Fenton treatment was dependent on the time of contact between soil and Fenton's reagents and matrix characteristics, probably iron content. Data suggested that no iron addition is needed for the application of Fenton-like treatment for the remediation of diesel-contaminated iron rich soils after 72 h reaction.