While the use of plastics continues to increase in our daily lives in a growing range products, these materials are very persistent in the environment. The blending of aliphatic polyesters with other thermoplastic polymers is a profitable way of producing materials with changed physical properties and biodegradability, which can facilitate microbial adhesion to the polymer matrix and help to reduce (post-consumer) degradation time of these materials in landfills. This study was an investigation of the biodegradation of films of blends of poly(vinyl chloride (PVC) and poly(ε-caprolactone) (PCL) by soil microorganisms and leachate, by means of respirometry, infrared absorption spectroscopy (FTIR), differential calorimetry scanning (DSC), scanning electron microscopy (SEM), contact angle and weight loss. The results showed that in the soil, the films suffered oxidative biodegradation. The PCL promoted degradation of the PVC in the film of PVC/PCL and the PVC inhibited the rapid degradation of the PCL.

Filmes de blenda de poli(ε-caprolactona) (PCL) e polipropileno (PP) foram obtidos por moldagem por compressão. O estudo da biodegradação de filmes de blendas de PP/PCL em solo e solo com chorume foi obtido pela evolução de CO2, perda de massa, ângulo de contato, microscopia eletrônica de varredura (MEV) e calorimetria exploratória diferencial (DSC). As análises de evolução de CO2 mostraram que a biodegradação da blenda de PP/PCL em solo com chorume foi maior que a dos homopolímeros, sugerindo que os polímeros na blenda são mais suscetíveis à degradação, o que se deve à não interação entre PP e PCL. Os resultados também mostraram que os microrganismos do solo com chorume provocaram uma erosão superficial. Verificou-se que a biodegradação do PCL é inibida pelos microrganismos do chorume adicionados no solo.

Blend films of polycaprolactone (PCL) and polypropylene (PP) have been obtained by melt-pressing of both components. The biodegradation of PP/PCL blend films in soil and soil with leachate landfill has been assessed with measurements of evolution of CO2, weight loss, contact angle, scanning electronic microscopy (SEM) and differential scanning calorimetry (DSC). The respirometric tests showed that the PP/PCL biodegradation in the soil with leachate was higher than the homopolymers, suggesting that the polymers in the blend are more susceptible to biodegradation owing to the lack of interaction between PP and PCL. The results also showed that biodegradation due to microorganisms in the soil with leachate occurred by surface erosion. It was found that the PCL biodegradation is inhibited by the leachate microorganisms added in the soil.