Abstract The development of ceramic membranes for the most diverse separation processes has gained high visibility, mainly due to their better performance in harsh environments in comparison to polymeric materials. Among the different techniques used to prepare tubular ceramic membranes, the centrifugal casting (CC) is interesting for obtaining highly homogeneous structures, essential for gas separations. This study assessed the influence of two sintering temperatures (1450 and 1500 °C) of alumina membranes prepared by CC on the membrane morphology and on the permeation of helium, nitrogen and oxygen gases. The membranes were characterized by their morphology, apparent porosity, and gas permeation. The results indicated that the sintering temperature is a fundamental parameter for controlling membrane properties, an increase of only 50 °C led to a tenfold decrease in the gas permeate flux, indicating densification of membrane porous structure. This was in accordance with the results observed in the membrane micrographs and the apparent porosity.

Abstract Coal and biomass are energy sources with great potential for use in Brazil. Coal-biomass co-gasification enables the combination of the positive characteristics of each fuel, besides leading to a cleaner use of coal. The present study evaluates the potential of co-gasification of binary coal-biomass blends using sources widely available in Brazil. This analysis employs computational simulations using a reliable thermodynamic equilibrium model. Favorable operational conditions at high temperatures are determined in order to obtain gaseous products suitable for energy cogeneration and chemical synthesis. This study shows that blends with biomass ratios of 5% and equivalence ratios ≤ 0.3 lead to high cold gas efficiencies. Suitable gaseous products for chemical synthesis were identified at biomass ratios ≤ 35% and moisture contents ≥ 40%. Formation of undesirable nitrogen and sulfur compounds was also analyzed.

AbstractThe components of fusel oil form azeotropes with water, resulting in challenges in obtaining hydrous ethanol fuel (HEF) and increasing investment and operating costs. The aim of this study was to evaluate how the presence of fusel oil affected HEF distillation. Mixtures of ethanol (6.0 to 6.5 % w/w) and water (93.0 to 94 % w/w) containing different concentrations (zero to 0.5 % w/w) of 3-methyl-1-butanol, 2-methyl-1-propanol, propan-1-ol and propan-2-ol were distilled in a laboratory apparatus. Under total reflux conditions, HEF concentrations in compliance with Brazilian legislation specifications were obtained, but the desired concentration could not be attained under continuous operation. All of the experiments resulted in a high loss of ethanol in the bottom product under multiple operating conditions. The results demonstrated that fusel oil affects HEF distillation, but that HEF concentrations can still be obtained in compliance with Brazilian legislation.

In this study the viability of utilising ashes with high chromium oxide content, obtained by thermal treatment of footwear leather waste, in the production of low-carbon ferrochromium alloy (Fe-Cr-LC) by aluminothermic reduction was investigated. The following key-factors were selected for process modelling: the quantity of aluminium (Al) employed in the reaction, the iron amount added, the iron compound (Fe and/or Fe2O3) used, and the chromic acid addition. The process was investigated using a 2(4) full factorial design where the percentage of Cr2O3 reduced was used as the response. Variance analysis was employed to determine the significant effects and to validate the obtained model. The model was useful for finding the optimal operating conditions, including the maximisation of chromium conversion and the gross margin. Both resulted in similar process conditions, with 76.8±12.3% of chromium being reduced to the metallic phase, and 1.65±0.52 USD (kg ash)-1 as the gross margin. The qualities of some alloys obtained were investigated by scanning electron microscopy coupled with energy dispersive X-ray spectroscopy analysis (SEM/EDS). The results showed that the main problem for these alloys in a standard specification was the P and S content, suggesting that a pre-treatment is required.

The objective of this work is to investigate the production of hydrogen as an energy source by means of the reaction of aluminum with water. This reaction only occurs in the presence of NaOH and KOH, which behave as catalysts. The main advantages of using aluminum for indirect energy storage are: recyclability, non-toxicity and easiness to shape. Alkali concentrations varying from 1 to 3 mol.L-1 were applied to different metallic samples, either foil (0.02 mm thick) or plates (0.5 and 1 mm thick), and reaction temperatures between 295 and 345 K were tested. The results show that the reaction is strongly influenced by temperature, alkali concentration and metal shape. NaOH commonly promotes faster reactions and higher real yields than KOH.