An inert atmosphere is, in some cases, important for the performing of experiments where substances are toxic and/or sensitive to oxygen. However, the high cost and accessibility of an equipment to work under these conditions, results in the fact that most laboratories do not have this kind of equipment. In this paper, we present a simple and efficient project to build a cheap glove box for processes that require an inert atmosphere. The proposed glove box is made using medium density fiberboard (MDF), an acrylic lid, hinges, air valves, PVC gloves and other materials that can be found easily in local stores or on the internet. Tests to verify the quality of the nitrogen atmosphere were performed using the lighter test and niobium pentachloride (NbCl5), which is a moisture/ oxygen sensitive material. The results demonstrated that the equipment is able to maintain an inert atmosphere for several hours, does not permit lighter to function and maintains the NbCl5 stable.

This study investigated the feasibility of H2 production by acid corrosion, employing a by-product from the fertilizer industry (Hexafluorsilic acid - H2SiF6) and waste iron sources. Different masses of metal from three different sources: iron powder (waste from metal workshops), steel wool and rebar (construction waste), were reacted with various proportions of H2SiF6 with HCl. The influence of the variables was evaluated by factorial design, verifying greater production of H2 for materials with higher contact areas. The lowest production was observed for construction industry waste (rebar) probably due to the presence of protective films and lower contact area. The gas produced was analyzed by gas chromatography and was found to consist only of H2 (up to 99%) and air. The results indicate a promising application of H2SiF6, which is generated in large quantities during phosphate fertilizer production and has few commercial applications. The method proposed is promising, it does not emit toxic or polluting gases, contributing to the sustainable generation of H2.

Resumo O objetivo do presente trabalho foi avaliar a degradação do corante azul de bromotimol em dispositivo Venturi empregando processo combinado: cavitação hidrodinâmica e peróxido de hidrogênio. O Planejamento Composto Central (PCC) foi utilizado para otimizar as variáveis; pressão, tempo de reação e proporção molar de peróxido de hidrogênio. Foram avaliadas as eficiências de degradação a partir das análises da Demanda Química de Oxigênio (COD) e a remoção de cor antes e após o tratamento no Venturi. Obteve-se a condição de remoção máxima de COD (93.42%) e cor (93.28%) para pressão de entrada de 4.0 bar, com tempo de tratamento de 25 minutos e proporção molar de H2O2 e efluente (corante) de 30:1. O sistema de cavitação hidrodinâmica, combinado com peróxido de hidrogênio, tem grande potencial para remover compostos orgânicos de difícil degradação (inércia química).

Abstract This study assessed the degradation of bromothymol blue in a Venturi device based on a hybrid process that combines hydrodynamic cavitation (HC) and hydrogen peroxide (H2O2). A Rotatable Central Composite Design (RCCD) was used to optimize the following variables: pressure, reaction time and molar ratio of hydrogen peroxide. Degradation efficiencies were evaluated based on Chemical Oxygen Demand (COD) and color removals before and after Venturi treatment. Maximum COD (93.42%) and color (93.28%) removals were observed at 4.0 bar inlet pressure, at a treatment time of 25 minutes and at H2O2/effluent (dye) molar ratio of 30:1. The hydrodynamic cavitation/hydrogen peroxide system has great potential to remove normally recalcitrant organic pollutants.

RESUMO: Os curativos medicamentosos são importantes barreiras para se evitar contaminação e ainda, quando contém aditivos antimicrobianos, servem como tratamento para ferimentos infectados. Existem vários tipos de materiais polissacarídicos que servem como matrizes para curativos medicamentosos, dentre eles, destaca-se o alginato de sódio. Para a preparação dos filmes estudados neste trabalho, utilizou-se alginato de sódio e incorporou-se óleos essenciais/oleoresinas (OE/OL) de seis pimentas utilizadas na culinária, em três diferentes concentrações. A maioria dos filmes preparados apresentou melhor dispersão dos OE/OL na concentração intermediária destes. Todos os filmes estudados neste trabalho apresentam solubilidade em água, em uma certa extensão. A atividade antibacteriana dos filmes preparados mostra resultados significantes contra Escherichia coli, Staphylococcus aureus e Bacillus Cereus, mostrando que os filmes estudados podem ser uma nova alternativa como curativos medicamentos.

ABSTRACT: Medicated wound dressings are important barriers to avoid contamination and, when they contain antimicrobial additives, can be used as treatment for infected wounds. There are several types of polysaccharide materials that serve as matrices for medicated wound dressings, among them, sodium alginate. For the preparation of the films studied in this paper, sodium alginate was employed in combination with essential oils/oleoresins (EO/OL) of six peppers that are commonly used in cooking. The EO/OL were incorporated at three different concentrations (low, intermediate and high). Most of the films prepared had better dispersion of the EO/OL at the intermediate concentration. All films studied in this research were dissolved in water at different rates. The antibacterial activity of the prepared films showed significant results against Escherichia coli, Staphylococcus aureus and Bacillus cereus, and demonstrated that the films studied may be a new alternative for medicated wound dressings.

RESUMO: O efeito da incorporação dos óleos essenciais de canela (Cinnamomum cassia) e noz-moscada (Myristicafragrans) em revestimentos comestíveis à base de alginato, aplicados em maçãs minimamente processadas é apresentado. As concentrações inibitórias mínimas foram de 1,25mg.mL-1 (canela) e 2,50mg.mL-1 (noz-moscada), contra Escherichia colie Penicillium commune. Durante o armazenamento, houve redução significativa nas contagens de E.coli e P. Commune em comparação com o controle. A extensão do escurecimento enzimático também foi significativamente reduzida nas amostras revestidas. Nas análises sensoriais, o sabor dos óleos essenciais apresentou a menor classificação das propriedades analisadas, tanto para os óleos essenciais, quanto para aroma e firmeza.

ABSTRACT: The effect of the incorporation of cinnamon (Cinnamomum cassia) and nut meg (Myristicafragrans) essential oils in alginate-based edible coatings that were applied on minimally processed apples, is reported. The minimum inhibitory concentrations were 1.25mg.mL-1 (cinnamon) and 2.50mg.mL-1 (nutmeg), against both Escherichia coli and Penicillium commune. Over storage periods there was a significant reduction in the E. coli and P. commune counts compared to the control. The extent of enzymatic browning was also significantly reduced in the coated samples. In the coated minimally processed apples sensory tests, the flavor had the lowest rating of the properties analyzed, for both treatments, followed by aroma and firmness.

RESUMO: Os óleos essenciais são os compostos mais importantes produzidos durante o metabolismo secundário de plantas aromáticas. No caso das pimentas, é possível afirmar que os óleos essenciais são a “impressão digital do sabor” de cada espécie. No presente artigo, oito espécies de pimenta foram estudadas a fim de extrair seus óleos essenciais e oleoresinas, testar a sua atividade antibacteriana e antifúngica, bem como, identificar os compostos presentes nas amostras mais ativas. Os resultados obtidos mostram que dois óleos essenciais (Pimenta dioica e Schinus terebinthifolius) e três oleoresinas (Schinus terebinthifolius e Piper nigrum branco e preto) apresentaram atividade antimicrobiana significativa. Esses óleos essenciais e oleoresinas bioativos mostram-se interessantes para a utilização em processos biotecnológicos empregados na indústria alimentar, farmacêutica e outras indústrias.

ABSTRACT: Essential oils are the most important compounds produced during secondary metabolism in aromatic plants. Essential oils are volatile, have characteristic odor and are used as defensive agents by plants. In pepper, it is possible to say that essential oils are the “flavor fingerprint” of each species. In the present article, eight species of pepper were studied in order to extract their essential oils and oleoresins, test their antibacterial and antifungal activities and also to identify the compounds present in the most bioactive samples. Results demonstrated that two essential oils [Pimenta dioica (L.) Merr. and Schinus terebinthifolius] and three oleoresins (Schinus terebinthifolius and Piper nigrum white and black) recorded significant antimicrobial activity. These active essential oils and oleoresins are interesting for use in biotechnological processes employed in food, pharmaceutical and other industries.

Resumo A contaminação de águas por espécies tóxicas ou recalcitrantes gera grandes impactos ambientais. Nesse contexto, os Processos Oxidativos Avançados (POAs), tecnologias que utilizam principalmente o radical hidroxila (HO●) para a oxidação dos poluentes, têm se destacado como métodos alternativos promissores no tratamento de águas residuais e efluentes industriais. Os POAs têm sido considerados uma estratégia eficaz do ponto de vista técnico, econômico e ambiental para a degradação de poluentes presentes em águas residuais e efluentes industriais, apesar de possuir limitações como alto custo das fontes de energia, desenvolvimento de novos materiais catalíticos de baixo custo e construção de reatores em escala real. Há uma grande relevância na aplicação desses processos em escala industrial mediante a otimização desses fatores de eficácia. Sendo assim, o objetivo deste trabalho foi realizar um levantamento bibliográfico sobre os POAs e apresentar dados a respeito da eficiência desses processos na degradação de poluentes, comparando os embasamentos teóricos e a sua aplicação industrial. Diante disso, os fundamentos e aplicações dos principais POAs (químicos, fotoquímicos, eletroquímicos, sonoquímicos, sonoeletroquímico e processos baseados em ozônio), bem como suas vantagens e desvantagens foram descritos nesta revisão da literatura.

Abstract Contamination of water by toxic and/or recalcitrant species has great environmental impacts. In this context, Advanced Oxidation Processes (AOPs) - technologies that principally use the hydroxyl radical (HO●) for oxidation - have emerged as promising alternatives in treating urban and industrial wastewaters. This study reviewed the literature on POAs and presented data regarding the efficiency of these processes in pollutant degradation, comparing the theoretical reasoning and its industrial applications. The fundamentals and major applications of AOPs (chemical, photochemical, electrochemical, sonochemical and ozone-based processes), as well as their advantages and disadvantages, are described in this review. AOPs have been considered an effective alternative from a technical, economic and environmental viewpoint for the degradation of pollutants in effluents and industrial wastewater, despite having limitations such as high cost of available energy sources, development of new low-cost catalytic materials and construction of full-scale reactors. It is greatly important to the industrial application of AOPs to optimize the effectiveness of these factors.

This paper presents the study of the oxidation of three textile dyes (Remazol black B, Remazol Brilliant Orange 3R and Remazol Golden Yellow RNL) using electrochemical and photoelectrochemical methods. In both methods, electrolysis experiments were performed at a current density of 50 mA cm-2 in an aqueous solution of each dye (30 mg L-1), using a photoelectrochemical flow-cell. For all the dyes studied, the photoelectrochemical method was demonstrated to be more efficient than the electrochemical one. Photoelectrochemical oxidation resulted in complete decoloration after 90 min of electrolysis and total organic carbon (TOC) removal reached up to 36%. It was observed that the dyes presenting chromophores at higher wavelengths are removed the quickest, which indicates that photosensitised (photoassisted) oxidation occurs. The level of color was reduced to levels below the standards presented in the literature, which indicates the viability of the photoelectrochemical process as part of the treatment of textile effluents.