Abstract This ecological study assessed the impact of the COVID-19 pandemic on completed treatments (CTs) and referrals during urgent dental visits to primary health care units in Brazil, and their associations with socioeconomic, geodemographic, and pandemic index factors in Brazilian municipalities. The difference in rates of procedures 12 months before and during the pandemic was calculated. Data were extracted at baseline from health information systems of all municipalities that provided urgent dental care (n = 5,229 out of 5,570). Multiple logistic regression predicted the factors associated with referrals and CTs. The number of dental urgencies increased from 3,987.9 to 4,272.4 per 100,000 inhabitants. The rates of referrals decreased in 44.1% of the municipalities, while 53.9% had lower rates of CTs. Municipalities with a greater number of oral health teams in the primary health care system (OR = 1.52, 95%CI:1.21–1.91) and with specialized services (OR = 1.80, 95%CI:1.50–2.16) were more likely to decrease referrals during the pandemic. Higher HDI and GDP per capita were associated with a larger decrease in referrals and smaller decrease in CTs. The calamity generated by the long pandemic period resulted in a greater demand for urgent visits. Less developed and larger cities seem to have been more likely to not complete treatments during urgent visits in primary dental care units in times of calamity. Primary dental care offices in smaller and less developed municipalities should be better equipped to provide appropriate assistance and to improve the problem-solving capacity of dental services during emergencies.

Abstract: This study aimed to compare the physicochemical properties of MTA Angelus (MTA-A), MTA Repair HP (MTA-HP), and Biodentine (BD). Setting times (n = 7) were determined in accordance with ASTM C266–15. Solubility (n = 11), pH (n = 10), and calcium ion release (n = 10) were evaluated up to 28 days in accordance with ANSI/ADA specification no. 57. Radiopacity was assessed by ANSI/ADA (n = 10) and the tissue simulator method (n = 10). In both methods, the specimens were radiographed using an aluminum stepwedge and the digital radiographs were analyzed in Adobe Photoshop, determining the mean grayscale pixel values of the materials, of the 3-mm aluminum stepwedge, and of the dentin, the latter of which was analyzed on the tissue simulator. The data obtained from each test were statistically analyzed and compared (p < 0.05). MTA-A presented longer final setting time compared with the other materials. There were no significant differences in the mass values of materials during the experiment. All materials presented an alkaline pH. BD promoted greater calcium ion release in most of the experimental periods. All materials presented appropriate radiopacity. BD showed lower radiopacity than MTA-A in the tissue simulator method. All groups presented higher radiopacity in the tissue simulator when compared with the ANSI/ADA method. MTA-A, MTA-HP, and BD showed appropriate physicochemical properties and radiopacity, and were considered suitable to be used in clinical practice.

Abstract Objectives This study aimed to investigate patterns and risk factors related to the feasibility of achieving technical quality and periapical healing in root canal non-surgical retreatment, using regression and data mining methods. Methodology This retrospective observational study included 321 consecutive patients presenting for root canal retreatment. Patients were treated by graduate students, following standard protocols. Data on medical history, diagnosis, treatment, and follow-up visits variables were collected from physical records and periapical radiographs and transferred to an electronic chart database. Basic statistics were tabulated, and univariate and multivariate analytical methods were used to identify risk factors for technical quality and periapical healing. Decision trees were generated to predict technical quality and periapical healing patterns using the J48 algorithm in the Weka software. Results Technical outcome was satisfactory in 65.20%, and we observed periapical healing in 80.50% of the cases. Several factors were related to technical quality, including severity of root curvature and altered root canal morphology (p<0.05). Follow-up periods had a mean of 4.05 years. Periapical lesion area, tooth type, and apical resorption proved to be significantly associated with retreatment failure (p<0.05). Data mining analysis suggested that apical root resorption might prevent satisfactory technical outcomes even in teeth with straight root canals. Also, large periapical lesions and poor root filling quality in primary endodontic treatment might be related to healing failure. Conclusion Frequent patterns and factors affecting technical outcomes of endodontic retreatment included root canal morphological features and its alterations resulting from primary endodontic treatment. Healing outcomes were mainly associated with the extent of apical periodontitis pathological damages in dental and periapical tissues. To determine treatment predictability, we suggest patterns including clinical and radiographic features of apical periodontitis and technical quality of primary endodontic treatment.

Abstract This study aimed to evaluate the role of photobiomodulation (PBM) in apexification and apexogenesis of necrotic rat molars with an open apex. Rat molars were exposed to the oral environment for 3 weeks. Canals were rinsed with 2.5% NaOCl and 17% EDTA, filled with antibiotic paste and sealed. After 7 days, canals were rinsed and divided into six groups (n=6): mineral trioxide aggregate (MTA); blood clot (BC); human dental pulp stem cells (hDPSC); MTA+PBM; BC+PBM; and hDPSC+PBM. In hDPSC groups, a 1% agarose gel scaffold was used. Two groups were not exposed: healthy tooth+PBM (n = 6), healthy tooth (n = 3); and one was exposed throughout the experiment: necrotic tooth (n = 3). In PBM groups, irradiation was performed with aluminum gallium indium phosphide (InGaAlP) diode laser for 30 days within 24-h intervals. After that, the specimens were processed for histological and immunohistochemical analyses. Necrotic tooth showed greater neutrophil infiltrate (p < 0.05). Necrotic tooth, healthy tooth, and healthy tooth+PBM groups showed absence of a thin layer of fibrous condensation in the periapical area. All the other groups stimulated the formation of a thicker layer of fibers (p < 0.05). All groups formed more mineralized tissue than necrotic tooth (p < 0.05). PBM associated with MTA, BC, or hDPSC formed more mineralized tissue (p < 0.05). MTA+PBM induced apexification (p < 0.05). Rabbit polyclonal anti-bone sialoprotein (BSP) antibody confirmed the histological findings of mineralized tissue formation, and hDPSC groups exhibited higher percentage of BSP-positive cells. It can be concluded that PBM improved apexification and favored apexogenesis in necrotic rat molars with an open apex.

Resumo O objetivo deste estudo foi avaliar a extrusão apical de debris durante a desobturação com WaveOne Gold (WOG), ProTaper Universal Retratamento (PTR), D-RaCe (DRR) ou limas manuais (HF), comparar o tempo de trabalho durante a desobturação, e descrever as falhas dos instrumentos de NiTi. Quarenta canais de raízes mésio-vestibulares de primeiros molars superiores foram preparados com WOG Primary, obturados e divididos em 4 grupos (n = 10), de acordo com os instrumentos a serem utilizados: WOG, PTR, DRR ou HF. Água destilada foi utilizada como irrigante, e os debris extruídos foram coletados em tubos Eppendorf e secos. A quantidade de debris extruídos foi determinada subtraindo-se o peso inicial do peso final. O tempo de cada desobturação foi anotado e os instrumentos utilizados foram analisados no pré e pós-operatório em MEV. Os testes Kruskal-Wallis e Dunn foram utilizados para analisar os dados da extrusão de debris, e os testes ANOVA e Tukey para comparar os dados do tempo de trabalho (a=0.05). As deformações e fraturas dos instrumentos foram descritas. O grupo WOG produziu significativamente menos debris quando comparado aos grupos HF e DRR (p<0.05), e foi similar ao grupo PTR (p>0.05). Os grupos HF, PTR e DRR não apresentaram diferença estatisticamente significante (p>0.05). O tempo de trabalho no grupo HF foi significativamente maior do que nos outros grupos (p<0.05). A análise em MEV mostrou que, dos 18 instrumentos avaliados, 3 fraturaram e em 10 foi observado deformação. Todos os sistemas testados causaram extrusão apical de debris. WOG foi associado com menor extrusão do que DRR e HF. A desobturação com HF foi mais lenta do que com os demais instrumentos. Todos os sistemas de NITI apresentaram fratura e deformação.

Abstract The aim of this study was to assess the amount of apically extruded debris during filling removal with WaveOne Gold (WOG), ProTaper Universal Retreatment (PTR), D-RaCe Retreatment (DRR) or hand files (HF), to compare the working time during filling removal, and to describe failures of NiTi instruments. Forty mesiobuccal roots of maxillary first molars were prepared with WOG Primary, obturated and divided into 4 groups (n=10), according to the instruments used: WOG, PTR, DRR or HF. Distilled water was used as irrigant and the extruded debris were collected in Eppendorf tubes and dried. The amount of extruded debris was determined by subtracting the final from the initial weight. The time of filling removal for each canal was recorded and the instruments used were analyzed pre and post-operatively by SEM. Kruskal-Wallis and Dunn’s test analyzed extruded debris data and ANOVA, followed by Tukey’s test, compared the working time data (a=0.05). Instrument deformation and fracture were described. WOG produced significantly less debris compared with HF and DRR (p<0.05), and similar to PTR (p>0.05). HF, PTR and DRR showed no significant difference (p>0.05). Working time in HF group was significantly higher than others (p<0.05). SEM analyses showed, from the 18 instruments evaluated, 3 fractures and 10 deformations. All instruments tested caused debris extrusion. WOG was associated with less extrusion than DRR and HF. Filling removal with HF was slower than with the other instruments. All NiTi systems presented fracture and deformation.

Resumo O objetivo deste estudo foi avaliar a radipacidade de diferentes pontas de guta-percha (Endo Points®, Dentsply®, Tanari®, Meta®, Roeko® e Odous®) em amostras de 1 mm de espessura, conforme estabelecido pela especificação #57 da ANSI/ADA e pela ISO 6876/2001, em comparação com amostras de menor espessura. Doze amostras de cada material, quatro para cada espessura (0,3, 0,6 e 1 mm; 8 mm de diâmetro), foram confeccionadas por meio de laminação e compressão entre duas lâminas de vidro polidas, até a espessura desejada. Radiografias digitais foram obtidas juntamente com uma escala de alumínio graduada, com espessuras variando de 1 a 10 mm. O aparelho de raios X foi ajustado para 70 kVp, 10 mA, 0,4s de tempo de exposição, com distância focal de 36 cm. Um observador calibrado quantificou a média dos valores de pixel no programa Adobe Photoshop®. Os dados foram analisados utilizando os testes ANOVA e Tukey, com nível de significância de 5%. Nas espessuras de 0,6 e 1 mm, todos os materiais testados apresentaram radiopacidade maior do que 3 mm de alumínio (valor de referência). Na espessura de 0,3 mm, Odous e Tanari apresentaram radiopacidade significativamente menor que a referência, e as outras marcas mostraram radiopacidade semelhante à referência. Conclui-se que os materiais apresentaram diferentes radiopacidades e todos mostraram valores acima do mínimo recomendado pela especificação #57 da ANSI/ADA, sendo Odous e Tanari menos radiopacos do que o valor de referência nas amostras mais finas (0.3 mm).

Abstract The aim of this study was to evaluate the radiopacity of different gutta-percha points (Endo Points®, Dentsply®, Tanari®, Meta®, Roeko® and Odous®) in samples of 1 mm thick as established by ANSI/ADA Specification #57 and ISO 6876/2001, in comparison with thinner samples. Twelve test specimens for each material, four for each thickness (0.3, 0.6, and 1 mm and diameter of 8 mm), were laminated and compressed between two polished glass plates until the desirable thickness. Digital radiographs were obtained along with a graduated aluminum stepwedge varying from 1 to 10 mm in thickness. The X-ray unit was set at 70 kVp, 10 mA and 0.4 s exposure time, at a focal distance of 36 cm. One calibrated observer quantified the average values of pixels with Adobe Photoshop® software. Data were analyzed using ANOVA and Tukey tests, at 5% significance level. At 0.6 and 1 mm thickness, all the tested materials showed radiopacity higher than 3 mm of aluminum (reference value). At 0.3 mm thickness, Odous and Tanari presented significantly less radiopacity than the reference, and the other materials showed similar radiopacity to the reference. The study concluded that the materials demonstrated different radiopacities and all had values above the minimum recommended by ANSI/ADA specification #57, being Odous and Tanari less radiopaque than the reference value in thinner samples (0.3mm).

Abstract This study aimed to evaluate the effect of final irrigation protocols on microhardness reduction and erosion of root canal dentin. Sixty root canals from mandibular incisors were instrumented and randomly divided into six groups (n = 10) according to the irrigant used: QMiX, 17% EDTA, 10% citric acid (CA), 1% peracetic acid (PA), 2.5% NaOCl (solution control), and distilled water (negative control). The chelating solutions were used to irrigate the canal followed by 2.5% NaOCl as a final flush. After the irrigation protocols, all specimens were rinsed with 10 mL of distilled water to remove any residue of the chemical solutions. Before and after the final irrigation protocols, dentin microhardness was measured with a Knoop indenter. Three indentations were made at 100 µm and 500 µm from the root canal lumen. Afterwards, the specimens were prepared for scanning electron microscopic analysis and the amount of dentin erosion was examined. Wilcoxon and Kruskal-Wallis tests were used to analyze the results with a significance level set at 5%. At 100 µm, all protocols significantly reduced dentin microhardness (p < .05), while at 500 µm, this effect was detected only in the EDTA and QMiX groups (p < .05). CA was the irrigant that caused more extensive erosion in dentinal tubules, followed by PA and EDTA. QMiX opened dentinal tubules, but did not cause dentin erosion. Results suggest that QMiX and 17% EDTA reduced dentin microhardness at a greater depth. Additionally, QMiX did not cause dentin erosion.

Resumo Um dos requisistos para a aplicação clínica de materiais endodônticos é apresentar comportamento biológico satisfatório. Neste estudo, as respostas do tecido conjuntivo a cimentos endodônticos à base de silicone (GuttaFlow 2), resina epóxica (AH Plus) e óxido de zinco e eugenol (Endofill) foram comparadas. Doze ratos Wistar tiveram tubos de polietileno (4 em cada animal) contendo um dos materiais e tubos vazios (controle negativo) implantados no tecido conjuntivo subcutâneo. Os tubos foram randomicamente posicionados pelo menos 2 cm distantes entre si e da espinha dorsal do animal. Amostras de tecido contendo os implantes foram processadas para análise histológica após 7 e 60 dias (n=6 animais por período). Células inflamatórias, condensação fibrosa e formação de abscesso foram classificadas em escores de acordo com sua intensidade. O teste Friedman, seguido por post hoc de Dunn, foi empregado para comparar os cimentos. O teste de Mann-Witney U foi empregado para verificar diferenças entre os períodos experimentais em cada grupo (p<0,05). Após 7 dias, a maior parte dos parâmetros histológicos não mostrou diferenças estatísticas entre os grupos. O cimento Endofill promoveu escores mais altos que os outros materiais para a variável células gigantes (p<0,05), além de apresentar um maior número de amostras com formação de abscesso. O GuttaFlow 2 tendeu a apresentar infiltrado inflamatório menos intenso comparado aos outros materiais. Após 60 dias, não houve diferenças estatisticamente significantes entre os grupos na maioria dos parâmetros avaliados. Entretanto, observou-se que o EndoFill apresentou escores mais altos para os macrófagos em comparação ao controle (p<0,05) e que o GuttaFlow 2 apresentou tendência a escores mais baixos que os demais materiais para as variáveis neutrófilos e abscesso. O GuttaFlow 2 apresentou propriedades biológicas apropriadas e pode ser considerado adequado para a prática clínica.

Abstract Satisfactory biological behavior is a necessary requirement for clinical application of endodontic materials. In this study, the connective tissue responses to silicone (GuttaFlow 2), epoxy resin (AH Plus) and zinc oxide and eugenol (Endofill) based sealers were compared. Twelve Wistar rats had polyethylene tubes (four per animal) containing one of the tested sealers and empty tubes (negative control) implanted in their subcutaneous tissue. The tubes were randomly placed 2 cm from the spine and at least 2 cm apart from one another. Tissue samples with implants were processed for histological analysis after 7 or 60 days (n=6 animals per period). Inflammatory cells, fibrous condensation and abscess were scored according to their intensity. Friedman, followed by Dunn's post hoc, was used to compare sealers. Differences between the two experimental periods were verified using Mann-Witney U test (p<0.05). At 7 days, most of the histological parameters showed no significant differences amongst groups. Endofill group scored higher than the others for giant cells (o<0.05) and promoted a greater number of samples presenting abscess formation. GuttaFlow 2 tended to show a less intense inflammatory infiltrate compared to the other materials. At 60 days, there were no significant differences between groups in most of the histological parameters evaluated. However, it was observed that Endofill scored higher for macrophages (p<0.05) compared to the control group, and GuttaFlow 2 tended to present lower scores than the others for neutrophils and abscess. GuttaFlow 2 showed proper biological behavior and should be considered adequate for clinical practice.

Abstract This study aimed to compare apical transportation, centering ratio, and working time during root canal preparation with Wizard Navigator (WN), WaveOne (WO), or ProTaper Universal (PT) and to describe deformation and fracture of these instruments. Thirty-six mesiobuccal roots from maxillary molars were micro-computed tomography (micro-CT) scanned and then sorted into three groups (n = 12): Wizard Navigator (WN), WaveOne (WO), and ProTaper Universal (PT). The root canals were prepared using WN, WO, or PT; the time of each canal preparation was timed; and the specimens were micro-CT re-scanned. The instruments were submitted to scanning electron microscopy (SEM) before and after their use. The data on canal transportation at 1, 2, 3, 4 and 5 mm and preparation time were analyzed by the Kruskal-Wallis test, followed by the Mann-Whitney U test. The centering ratio was analyzed by ANOVA, followed by Tukey’s test. Both instrument deformation and fracture were described. Apical transportation was similar among groups at 1, 2, 3 and 4 mm. The WO group showed higher canal transportation at 5mm than the other groups (p = 0.03). There was no significant difference in centering ratio among the groups. Preparation time in the WO group was significantly lower than in the other groups (p = 0.004). Small differences were observed in the surface area of all instruments. The WN, WO, and PT groups had a similar centering ratio without procedural errors or significant structural changes. At 5 mm from the apex, the WO group showed the largest canal transportation toward the furcation and root canal preparation was faster than in the WN and PT groups.

Este estudo realizou uma avaliação histológica do efeito das soluções irrigadoras Sterilox 400 ppm e hipoclorito de sódio (NaOCl) a 2% e 5%, com e sem a terapia fotodinâmica (PAD), na endodontia em sessão única de dentes de cães associados a lesões periapicais (APs). Dez cães foram divididos de forma randomizada em dois grupos (n=5): com e sem PAD, e os canais radiculares em quatro subgrupos, de acordo com a solução irrigadora utilizada: SX (Sterilox 400 ppm), SH2 (NaOCl 2%), SH5 (NaOCl 5%) e SS (solução salina) como controle positivo. Cento e trinta e quatro canais foram abertos e deixados expostos ao meio oral por 14 dias e depois selados por 60 dias para a indução de APs. Na sequência, os canais foram tratados de acordo com cada protocolo de desinfecção proposto e obturados na mesma sessão. Após 120 dias, os cães foram mortos e os eventos inflamatórios periapicais foram avaliados em microscopia óptica. Os dados qualitativos foram analisados estatisticamente pelos testes Kruskal-Wallis e Mann-Whitney (α=0,05). A PAD, quando empregada após o preparo químico-mecânico, não promoveu diferenças significativas nos escores para inflamação apical (p>0,05). As soluções irrigadoras SX, SH2 e SH5 sem PAD apresentaram diferenças estatísticas do grupo SS (p<0,05) que apresentou os maiores escores para inflamação apical. A PAD não apresentou efeito adicional na endodontia em sessão única dos canais com necrose pulpar associados a lesão apical e a solução irrigadora Sterilox 400 ppm pode ser considerada uma alternativa ao NaOCl na terapia endodôntica.

This study aimed to evaluate histologically the effect of irrigation with 400 ppm Sterilox, 2% and 5% sodium hypochlorite (NaOCl), with and without photo-activated therapy (PAD), in a single-visit root canal treatment of dog's teeth with apical periodontitis (AP). Ten dogs were randomly divided into two groups (n=5): with and without PAD, and the root canals into four subgroups, according to the irrigating solution: SX (400 ppm Sterilox), SH2 (2% NaOCl), SH5 (5% NaOCl) and SS (saline solution) as positive control. A total of 134 root canals were opened and left exposed to the oral environment for 14 days and then sealed for 60 days for AP induction. Then, root canals were treated according to each proposed disinfecting protocol and filled in the same session. After 120 days, the dogs were euthanized and the periapical inflammatory events were evaluated under light microscopy. Qualitative data were submitted to Kruskal-Wallis and Mann-Whitney tests (α=0.05). PAD did not produce significant differences in the scores for apical inflammation when used after chemo-mechanical preparation (p>0.05). The irrigating solutions SX, SH2 and SH5 without PAD were statistically different from SS (p<0.05) that presented the greatest scores for apical inflammation. PAD did not show any additional effect for the treatment of root canals with pulp necrosis and AP in a single visit and 400 ppm Sterilox may be considered an alternative to NaOCl in root canal treatment.

O presente estudo teve como objetivo avaliar a influência das seguintes soluções irrigadoras na microdureza da dentina do canal radicular: hipoclorito de sódio a 2% (NaOCl2), hipoclorito de sódio a 5% (NaOCl5), água superoxidada (Sterilox(r) 400 ppm - Sx) e EDTA a 17% (E). Oitenta raízes de incisivos bovinos foram divididas aleatoriamente em 8 grupos (n=10): NaOCl2, NaOCl5, Sx e NaOCl2 + E, NaOCl5 + E, Sx + E (associados ao E como irrigante final por 5 min), E isolado e água destilada (H2Od), como controle negativo. O preparo dos canais radiculares foi realizado com instrumentos manuais, usando um dos protocolos de irrigação por 30 min. A seguir, 5 mm do terço cervical de cada amostra foram cortados perpendicularmente e submetidos ao teste de microdureza de Vickers, em dois pontos, um aproximadamente 500-1000 µm da luz do canal radicular (distância 1), e o outro aproximadamente 500-1000 µm da superfície externa da raiz (distância 2). Os dados foram analisados pelos testes de Wilcoxon e Kruskal-Wallis com um nível de significância de 5%. Os valores de microdureza na distância 1 foram significativamente menores do que na distância 2 para todos os grupos, exceto NaOCl5 e NaOCl5 +E (p>0,05). O EDTA mostrou os menores valores de microdureza. No entanto, não foi detectada diferença estatisticamente significativa entre os grupos na distância 1 e o EDTA foi significativamente diferente apenas do Sx na distância 2. Pode-se concluir que todas as soluções testadas mostraram menor microdureza na camada de dentina mais superficial do canal radicular em comparação aos valores encontrados próximo à superfície radicular externa, exceto NaOCl5 e NaOCl5 + E; o EDTA promoveu menor microdureza em comparação ao Sterilox(r) neste ponto.

The present study aimed to evaluate the influence of the following irrigating solutions on the microhardness of root canal dentin: 2% sodium hypochlorite (2NaOCl), 5% sodium hypochlorite (5NaOCl), super-oxidized water (400 ppm Sterilox - Sx) and 17% EDTA (E). Eighty roots from bovine incisors were randomly divided into 8 groups (n=10): 2NaOCl, 5NaOCl, Sx, and 2NaOCl + E, 5NaOCl + E, Sx + E (associated with E as final irrigant for 5 min), E solely and distilled water (dH2O) as the negative control. Root canal preparation was performed by hand instruments, using one of the irrigation protocols for 30 min. Then, 5 mm of the cervical root third were cut out from each sample and subjected to the Vickers microhardness test, at two points, one at approximately 500-1000 µm from the root canal lumen (distance 1), and the other at approximately 500-1000 µm from the external root surface (distance 2). Data were analyzed by Wilcoxon and Kruskal-Wallis tests at 5% significance level. Microhardness values at distance 1 were significantly lower than those at distance 2 for all groups, except 5NaOCl and 5NaOCl + E groups (p>0.05). EDTA showed the lowest microhardness values. However, no statistically significant difference was detected among groups at distance 1 and EDTA was significantly different only from Sx at distance 2. In conclusion, all tested solutions showed lower microhardness at the most superficial root canal dentin layer compared to the one found near the external root surface, except 5NaOCl and 5NaOCl + E; EDTA promoted lower microhardness values in comparison to Sterilox at this site.

Due to the low radiopacity of Sealer 26, iodoform is frequently empirically added to this sealer. Thus, the interference of this procedure with the physicochemical properties of Sealer 26 must be evaluated. Objective: This study evaluated the influence of the addition of iodoform on setting time, flow, solubility, pH, and calcium release of an epoxy-based sealer. Material and Methods: The control group was pure Sealer 26, and the experimental groups were Sealer 26 added with 1.1 g, 0.55 g or 0.275 g of iodoform. Setting time evaluation was performed in accordance with the ASTM C266-03 speciflcation. The analysis of flow and solubility was in accordance with the ISO 6876-2001 speciflcation. For the evaluation of pH and calcium ion release, polyethylene tubes were filled with the materials and immersed in flasks with 10 ml of deionized water. After 24 h, 7, 14, 21, 28, and 45 days pH was measured. In 45 days, the calcium released was evaluated with an atomic absorption spectrophotometer. Results: The addition of iodoform increased setting time in comparison with pure sealer (P<0.05). As for flow, solubility, and calcium release, the mixtures presented results similar to pure sealer (p>0.05). In the 24 h period, the mixture with 1.1 g and 0.55 g of iodoform showed lower pH than pure sealer and than sealer added with 0.275 g of iodoform (P<0.05). Conclusions: The iodoform added to Sealer 26 interferes with its setting time and solubility properties. Further studies are needed to address the clinical signiflcance of this interference.

OBJECTIVE: The objective of this work was to evaluate, using radiographic images, the behavior of four materials used to repair root perforations in dogs' teeth. Material and METHODS: Second and third premolars of 6 dogs were used. The 48 teeth were randomly divided into 4 groups (n=12) and the perforations were sealed with one of the following materials: MTA, AH Plus, Vitremer and gutta-percha. Dogs were submitted to general anesthesia, teeth were radiographed and pulp was accessed. Perforations were done, at the maximum curve of the pulp floor, sealed and the accessed coronal cavity was filled with glass ionomer cement (Vidrion R). After 90 days, the dogs were sacrificed and the last x-ray image was taken. Images were analyzed for the presence/absence of periodontal lesions at the perforation region. Data were analyzed statistically by chi-square test at 5% significance level. RESULTS: There were no statistically significant differences (p>0.05) among AH Plus, Vitremer and gutta-percha groups. MTA produced the smallest number of periodontal lesions (p<0.05). CONCLUSIONS: It may be concluded that none of the tested materials was able to preserve the integrity of the periodontal tissues in the furcation region, and the use of MTA resulted in the least formation of adjacent periodontal bone lesions revealed by the radiographic comparisons.

OBJECTIVE: This study tested rat connective tissue response to RealSeal, RealSeal primer or AH Plus after 7, 15, 30, 60 and 90 days of implantation. MATERIAL AND METHODS: Thirty Wistar rats had subcutaneous sockets created on their back and received four implants each of polyethylene tubes containing one of the materials tested according to the groups: AH (AH Plus Sealer); RS (RealSeal Sealer); RP (RealSeal Primer); CG (control group - empty tube). After histological processing, sections were analyzed to identify the presence of neutrophils, lymphocytes and plasma cells, eosinophils, macrophages and giant cells, as well as fibrous capsule and abscesses, by an examiner using light microscope. Kruskal-Wallis and multiple-comparisons test were used for statistical analysis. Significance level was set at 5%. RESULTS: Lymphoplasmacytic infiltrate scores significantly higher than those of the control group were observed at 14 and 60 days in AH group, and at 90 days in RS group (p<0.05). There were no differences in terms of presence of macrophages, giant cells, eosinophils, neutrophils or fibrosis. AH Plus group scored higher for abscesses at 7 days than after any other period (p=0.031). RP group scored higher for lymphoplasmacytic infiltrate at 14 days than at 90 days (p=0.04). CONCLUSION: The main contribution of this study was to demonstrate that issues involved with tissue tolerance of a Resilon-containing sealer, RealSeal Sealer, cannot be attributed to its primer content.

OBJETIVO: Comparar três localizadores apicais eletrônicos (LAEs) e avaliar a influência do pré-alargamento cervical na sua acurácia. MÉTODOS: O comprimento de trabalho (CT) de trinta incisivos inferiores humanos extraídos foi determinado visualmente. Todos os dentes foram montados em um meio condutor e testados com Novapex, Mini Apex Locator e Propex II. O CT eletrônico foi determinado antes e após pré-alargamento com brocas LA Axxess. As diferenças entre o CT eletrônico e visual foram calculadas e analisadas pelos testes de Friedman e Wilcoxon. Radiografias foram realizadas com o CT eletrônico de cada LAE e a distância da ponta do instrumento ao vértice radiográfico foi mensurada. Este valor foi comparado com um valor de referência ou ideal (1 mm) pelo teste t para uma amostra. RESULTADOS: Novapex foi o LAE mais preciso antes e após procedimento de pré-alargamento, o que foi confirmado pela análise radiográfica. Todos os LAEs testados aumentaram sua acurácia após pré-alargamento, mas não foi observada diferença significativa para o Novapex. CONCLUSÃO: Novapex foi mais preciso que Mini Apex e Propex II. O procedimento de pré-alargamento foi vantajoso para todos os LAEs.

PURPOSE: To compare the accuracy of three electronic apex locators (EALs) and evaluate the influence of cervical preflaring in them. METHODS: The working length (WL) of thirty extracted human mandibular incisors was determined visually. All teeth were mounted in conducting medium and tested with: Novapex, Mini Apex Locator and Propex II. The electronic WL was determined before and after preflaring with LA Axxess burs. Differences between the electronic and visual WL were calculated and analyzed by Friedman and Wilcoxon tests. Radiographs were taken using the electronic WL of each EAL and the distance between the instrument tip and the radiographic apical vertex was measured. This value was compared to a reference or ideal value (1 mm) by one-sample t test. RESULTS: The Novapex was the most accurate EAL before and after the preflaring procedure, which was confirmed by the radiographic analysis. All EALs tested increased their accuracy after preflaring, but no significant difference was noted for the Novapex. CONCLUSION: The Novapex was more accurate compared to the Mini Apex and Propex II. Preflaring procedure was advantageous for all EALs.