Abstract The present study evaluated the influence of carvacrol, terpinene-4-ol, and chlorhexidine on the physical-chemical properties of titanium surfaces, cell viability, proliferation, adhesion, and spreading of fibroblasts and osteoblasts in vitro. Titanium surfaces (Ti) were treated with Carvacrol (Cvc), Terpinen-4-ol (T4ol), Chlorhexidine (CHX), DMSO, and ultrapure water (Control group). Physical-chemical modifications were evaluated by surface wettability, the surface free energy (SFE) calculated from the contact angle values using the Owens-Wendt-Rabel-Kaeble (OWRK) equation, scanning electron microscopy (SEM) and energy dispersive spectrometry probe (EDS) system. Cells were seeded onto Ti-treated surfaces and incubated for 24 h and 72 h, then evaluated by Alamar blue assay and fluorescence microscopy. Surfaces treated with Cvc and T4ol showed the presence of Na, O, and Cl. All surfaces showed hydrophilic characteristics and SFE values between 5.5 mN/m and 3.4 mN/m. On the other hand, EDS peaks demonstrated the presence of O and Cl after CHX treatment. A reduction of cell viability and adhesion was noted on titanium surfaces treated with CHX after 24 and 72h. In conclusion, the results indicate that the decontamination with Cvc and T4ol on Ti surfaces does not alter the surface proprieties and allows an adequate interaction with cells involved in the re-osseointegration process such as fibroblasts and osteoblasts.

Resumo O presente estudo avaliou a influência do carvacrol, terpineno-4-ol e clorexidina nas propriedades físico-químicas de superfícies de titânio, viabilidade celular, proliferação, adesão e esplhamento de fibroblastos e osteoblastos in vitro. Superfícies de titânio (Ti) foram tratadas com Carvacrol (Cvc), Terpinen-4-ol (T4ol), Clorexidina (CHX), DMSO e água ultrapura (Grupo Controle). As modificações físico-químicas foram avaliadas pela molhabilidade da superfície, a energia livre de superfície (ELS) calculada a partir dos valores do ângulo de contato usando a equação de Owens-Wendt-Rabel-Kaeble (OWRK), microscopia eletrônica de varredura (MEV) e espectroscopia de raios X por energia dispersiva (EDS). As células foram semeadas em superfícies tratadas com Ti e incubadas por 24 h e 72 h, e avaliadas pelo ensaio Alamar blue e microscopia de fluorescência. As superfícies tratadas com Cvc e T4ol mostraram a presença de Na, O e Cl. Todas as superfícies apresentaram características hidrofílicas e valores de ELS entre 5,5 mN/m e 3,4 mN/m. Por outro lado, os picos de EDS demonstraram a presença de O e Cl após o tratamento com CHX. Uma redução da viabilidade celular e adesão foi observada em superfícies de titânio tratadas com CHX após 24 e 72h. Em conclusão, os resultados indicam que a descontaminação com Cvc e T4ol em superfícies de Ti não altera as propriedades da superfície e permite uma interação adequada com células envolvidas no processo de reosseointegração como fibroblastos e osteoblastos.

The application and use of efficient cooling fluids have become increasingly important due to the increasing industrial and energy demand associated with the miniaturization of various electronic devices. The search for high-efficiency heat exchanger fluids in the early 1990s led to the development of a new class of refrigerants called nanofluids. The use of nanofluids is linked to obtaining stable colloidal dispersions which exhibit high thermal conductivity. For this purpose, the efficiency of a nanofluid will depend on the type of fluid used and the dispersed nanomaterial. In this work, a stable aqueous nanofluid based on mercaptopropionic acid-coated copper sulfide nanoparticles (Cu2S/MPA), synthesized by the chemical reduction method, was developed. The nanofluid presented colloidal stability in alkaline medium and an average increase of 36% in thermal conductivity for a volumetric fraction of 0.05%.

The present work demonstrates preparation of magnetic nanoparticles by a novel method. Magnetic nanoparticles with potential for biomedical and environmental applications were obtained by homogeneous coprecipitation method sonochemically assisted. The effect of ultrasonic cavitation on changing the reaction environment was studied. The chemical reaction media used here was very similar to those used for Sono-Fenton process. The ultrasonic energy has driven the growth of particles; smaller diameter nanoparticles were obtained by applying a higher power. For the first time, it was demonstrated the iron oxide nanoparticles synthesis at pH lower than 6.

Communications on Chemistry of Materials topics were already presented in the first annual meetings of the Brazilian Chemical Society, dispersed throughout various meeting sections. The SBQ Materials Chemistry division was organized in 1993, attracting those members with an interest in the composition, structure and properties of materials, as related to their functions. This paper is an account of the development of Materials Chemistry research in Brazil, based on the SBQ annual meetings data.

Partículas esféricas de sílica foram obtidas via microemulsão inversa em sistema AOT / Heptano / H2O, utilizando-se soluções de silicato de sódio como precursor. Variações de condições experimentais durante a precipitação levam à mudanças no tamanho e na forma das partículas. O objetivo deste trabalho é otimizar a obtenção de partículas de sílica com homogeneidade de forma e tamanho, variando-se a ordem de adição dos reagentes, a concentração da solução de silicato de sódio, a razão água/surfactante (W), a ordem de mistura dos reagentes e a purificação do produto obtido. As micrografias evidenciaram que para se obter partículas esféricas, com faixa estreita de tamanho, utiliza-se duas microemulsões inversas a partir das soluções de ácido nítrico e de silicato de sódio, sendo que a mistura destas deve ser feita adicionando-se a microemulsão contendo o silicato de sódio sobre a microemulsão contendo o ácido nítrico. A relação silicato de sódio:água mais adequada de para os objetivos do trabalho é de 1:10. A purificação mais eficiente é aquela feita em duas etapas, com etanol e com água quentes. A partir dos resultados obtidos, pode-se verificar também que quanto maior o W maior será o tamanho médio de partícula.

Silica spherical particles were prepared in reverse microemulsion from sodium silicate solution precursor. Particle shape and size changes were investigated in function of reactants addition order, sodium silicate solution concentration and water to surfactant ratio (W) and product separation and purification. This paper reports on the uniform spherical silica particles preparation in function of the mentioned different experimental conditions. Scanning electron micrographs show uniform spherical silica particle obtained from the mixture of two reverse microemulsion: microemulsion A with soluble sodium silicate was added to a microemulsion B with nitric acid solution. Concentrated sodium silicate solution was diluted to 1:10 (silicate:water) ratio. Separation and purification was carried out in two steps with hot ethanol and water. The average particle size increases as W increases.

Unusual chemical phenomenon associated with ultrasound is on account of cavitation effect. The ultrasound increase the rate and yield of chemical reaction on account of its ability to emulsify liquids. When the ultrasound is used in metallic catalyst reaction the activity of catalyst is increased because the ultrasound clean the surface of catalyst. Sonogels have a fine porosity and large specific surface improving different properties. This paper deals with ultrasound phenomenon and gives some examples of reactions and properties where this radiation takes an important role.