ABSTRACT: The objective of this in vitro study was to assess the effects of two antioxidants (sodium ascorbate [SA] and alpha-tocopherol [AT]) on the adhesive interface and dentin bond strength immediately after bleaching with 38 % hydrogen peroxide (38HP) in endodontically-treated teeth. Two stages of experimentation were carried out. Bovine incisors were allocated into four groups (n = 10/group for each experiment): NB, non-bleached restored crowns; 38HP, bleached and immediately restored crowns; 38HP-SA, bleached crowns and SA use; and 38HP-AT, bleached crowns and AT use. Hybrid layer length in dentin (μm) and bond strength (MPa) were assessed with confocal microscopy laser and micro-shear bond strength (μSBS) test, respectively. Failure mode was determined by stereomicroscope. Data analysis was performed with analysis of variance (ANOVA) and Kruskal-Wallis, Dunn, Tukey, and Fisher-exact tests (a = 0.05). Higher values of hybrid layer length were observed similarly in the NB and 38HP-SA groups. The highest μSBS mean values were observed in the NB group (18 .51 ? 1.33), whereas the SBS values for 38HP-AT (1.68 ? 0.32) were similar to the 38HP group (1.61 ? 0.51) (p > 0.05) and significantly lower than the 38HP-SA group (5.78 ? 0.71). Adhesive failures were predominant in the 38HP and 38HP-AT groups. Cohesive and mixed failures were mostly observed in the NB and 38HP-SA groups, respectively. In conclusion, AT has no immediate effect on the hybrid layer formation and μSBS of dentin. Although SA promotes an increase in hybrid layer formation, it was not reflected in the μSBS values.

RESUMEN: El objetivo de este estudio in vitro fue evaluar los efectos de dos antioxidantes (ascorbato de sodio [AS] y alfa-tocoferol [AT]) sobre la interfaz adhesiva y la fuerza de unión de la dentina inmediatamente después del blanqueamiento con peróxido de hidrógeno al 38 % (38HP) en endodoncia. -Dientes tratados. Se llevaron a cabo dos etapas de experimentación. Los incisivos bovinos se dividieron en cuatro grupos (n = 10 / grupo para cada experimento): NB, coronas restauradas no blanqueadas; 38HP, coronas blanqueadas y restauradas inmediatamente; 38HP- AS, coronas blanqueadas y uso SA; y 38HP-AT, coronas blanqueadas y uso de AT. La longitud de la capa híbrida en dentina (μm) y la fuerza de unión (MPa) se evaluaron con láser de microscopía confocal y la prueba de fuerza de unión por micro-cizallamiento (μSBS), respectivamente. El modo de falla se determinó mediante estereomicroscopio. El análisis de los datos se realizó con análisis de varianza (ANOVA) y pruebas de Kruskal-Wallis, Dunn, Tukey y Fisher (α = 0,05). De manera similar, se observaron valores más altos de longitud de capa híbrida en los grupos NB y 38HP-AS. Los valores medios más altos de μSBS se observaron en el grupo NB (18,51 ? 1,33), mientras que los valores de SBS para 38HP-AT (1,68 ? 0,32) fueron similares a los del grupo 38HP (1,61 ? 0,51) (p> 0,05) y significativamente más bajos que el grupo 38HP-AS (5,78 ? 0,71). Las fallas adhesivas fueron predominantes en los grupos de 38HP y 38HP-AT. Las fallas cohesivas y mixtas se observaron principalmente en los grupos NB y 38HP-AS, respectivamente. En conclusión, la AT no tiene un efecto inmediato sobre la formación de la capa híbrida y el μSBS de dentina. Aunque AS promueve un aumento en la formación de capas híbridas, no se refleja en los valores de μSBS.

Abstract This study evaluated the effects of 10% alphatocopherol on the fracture resistance of endodontically treated teeth subjected to tooth bleaching with hydrogen peroxide and immediately restored with composite resin. Fifty bovine incisors were selected, including 10 sound teeth that constituted the control group (G1 (C)). The remaining 40 teeth, which were endodontically treated, were divided into four groups (n = 10): G2 (CR), consisting of teeth immediately restored with composite resin; G3 (HP + CR), consisting of teeth subjected to tooth bleaching with 38% hydrogen peroxide and immediately restored with composite resin; G4 (HP + SA + CR), which received treatment similar to that used for G3, but with 10% sodium ascorbate gel applied after the bleaching protocol; and G5 (HP + AT + CR), which was similar to G4 but included 10% alphatocopherol gel as an antioxidant. After 24 h, composite restorations were performed, and teeth were subjected to a fracture resistance test at a speed of 0.5 mm/min in an electromechanical testing machine. The axial force was applied with an angle of incidence of 135° relative to the long axis of the root. Data were subjected to ANOVA and Tukey tests (p = 0.05). G1 exhibited the highest fracture resistance (p < 0.05). No significant differences among the other experimental groups were observed. The 10% sodium ascorbate and 10% alphatocopherol gels did not improve the fracture resistance of endodontically treated teeth subjected to bleaching with 38% hydrogen peroxide.

Abstract: Endodontic sealer residues remaining within the pulp chamber dentin after root canal obturation and cleaning with various solvents may compromise the appearance and the durability of dental restorations. Acid etching is routinely performed prior to application of dentine adhesive systems, but is effect on residual sealer material and the optimal time-point for performing etching, are unknown. Here, we evaluated the effect of acid etching on the dentin surface when performed either immediately or 7 days after removal of the endodontic sealer with two solvents, i.e., 95% ethanol or xylol. Forty crowns fragments from bovine incisors were impregnated with sealer and divided into 4 groups (n = 10 each), according to the dentin cleaning protocol and to the acid etching time-point: G1, 95.0% ethanol and immediate acid etching; G2, xylol and immediate acid etching; G3, 95.0% ethanol and acid etching after 7 days; and G4, xylol and acid etching after 7 days. Scanning electron microscopy (SEM) images (2000 ×) were obtained from each specimen and the number of open dentinal tubules counted and compared. Another 40 fragments were similarly prepared, and SEM images were obtained (500 ×) to score and compare the persistence of sealer residues on the dentin. G4 showed the most open dentinal tubules and the least epoxy resin-based sealer residues on the dentin surface (p < 0.05). The least epoxy resin-based sealer residues was obtained when acid etching, using 37% phosphoric acid, was performed after 7 days after cleaning the dentin with xylol.