resumo: A utilização de perfis estruturais de GFRP (Glass Fiber Reinforced Polymers) no setor da construção civil vem crescendo devido as suas propriedades atrativas, como altas resistências mecânicas e a durabilidade em ambientes agressivos. Com isso, faz-se necessário a realização de estudos que aprofundem o conhecimento sobre o desempenho desses materiais em aplicações estruturais. Sendo assim o presente trabalho tem por objetivo analisar o desempenho mecânico de vigas de concreto armado revestidas com perfis de GFRP, em comparação a vigas de concreto armado, através da análise de grupos com distintos espaçamentos entre armaduras transversais. Em todos os grupos não houve alteração nas armaduras longitudinais, e os grupos D e Q eram constituídos, respectivamente, por armaduras transversais espaçadas conforme o dobro e o quadruplo do calculado para as vigas referência, e apresentavam os perfis de GFRP em sua constituição. Todas as vigas foram ensaiadas a flexão quatro pontos, e strain gauges foram instalados em uma das vigas de cada grupo estudado. Os resultados obtidos nos ensaios apresentaram um aumento de resistência de 83.67% nas vigas do grupo D, e de 79.91% para o grupo Q, em relação as referências. A análise de deformações longitudinais possibilitou verificar aumentos de rigidez e o momento de fissuração nas vigas mistas. Sendo assim, com base nesse estudo, as estruturas mistas estudadas podem constituir futuras soluções para construções expostas a condições ambientais agressivas, com o intuito de aumentar a sua durabilidade e, também, contribuir para o dimensionamento de tais elementos estruturais com menores taxas de armadura.
abstract: The use of GFRP (Glass Fiber Reinforced Polymers) structural profiles in the construction sector is growing due to their attractive properties, such as high mechanical strength and durability in aggressive environments. With this, it is necessary to conduct studies that deepen the knowledge about the performance of these materials in structural applications. Therefore, this work aims to analyze the mechanical performance of reinforced concrete beams coated with GFRP profiles, in comparison to reinforced concrete beams, by analyzing groups with different spacing between transversal reinforcement. In all groups there was no change in the longitudinal reinforcement, and the D and Q groups were, respectively, made up of transverse reinforcement spaced twice and quadruple the one calculated for the reference beams, and presented the GFRP profiles in their constitution. All beams were tested at four-point bending, and strain gauges were installed in one of the beams of each group studied. The results obtained in the tests showed an increase in strength of 83.67% in the beams of group D, and 79.91% for group Q, in relation to the references. The analysis of longitudinal deformations made it possible to verify increases in stiffness and the moment of cracking in composite beams. Thus, based on this study, the composite structures studied may constitute future solutions for constructions exposed to aggressive environmental conditions, in order to increase their durability and also to contribute to the design of such structural elements with lower reinforcement rates.