ABSTRACT The addition of expanded graphite (EG) on environmentally friendly polymer matrix was systematically studied to produce carbon-polymer porous composite. Firstly, an appropriate EG was produced by monitoring the time and temperature of intercalated graphite thermal expansion while poly(furfuryl alcohol) (PFA) resin was obtained from the furfuryl alcohol polymerization. After PFA synthesis, different EG amounts of 0.2, 0.5, and 1.0 wt% were added in the resin and evaluated by viscosimetry and differential scanning calorimetry that showed EG helped in the crosslink formations decreasing the onset and endset temperatures. PFA resin kept a good fluidity, even for 1.0 wt% EG ensuring its homogeneous impregnation on the polyurethane foams. FTIR analyses confirmed the presence of functional groups on EG, which would contribute to the resin impregnation on the foam porous structure without changing the thermal resistance of the final product. (EG carbonpolymer carbon composite Firstly polyfurfuryl poly (PFA polymerization synthesis 02 0 2 0.2 05 5 0.5 10 1 1. wt temperatures fluidity foams product 0.

The influence of different supporting electrolytes as well as of different current densities on RO16 dye electrochemical oxidation using BDD electrodes has been systematically studied. The RO16 azo-dye electrooxidation experiments were performed at different current densities and three different supporting electrolytes: H2SO4 0.1 mol L-1, HClO4 0.1 mol L-1 and K2SO4 0.1 mol L-1. The results showed that a higher degradation for reactive azo dye RO16 was observed for the K2SO4 (pH=10) supporting electrolyte for a current density of 100 mA cm-2. This behavior can be associated with the deprotonation effect of the dye molecule, which can facilitate breakdown of the molecule, specifically the azo bond making color removal more efficient. In addition, in this pH there is a greater amount of hydroxyl ion (OH-) available increasing the hydroxyl radical formation.

Boron doped ultrananocrystalline diamond (BDUND) films were grown and characterized on porous silicon (PS) substrates. PS samples were prepared from n-type monocrystalline silicon wafers (100) with 1-20 Ω.cm of resistivity, by electrochemical etching, using HF-acetonitrile solution as electrolyte. BDUND films were grown by Hot Filament Chemical Vapor Deposition using CH4, H2 and Ar. The doping process consisted of an additional hydrogen line, passing through a bubbler containing B2O3 dissolved in methanol, with boron/carbon ratio of 20000 ppm in solution. Raman spectroscopy and X-Ray diffraction were used to evaluate the quality of the films. Scanning electron microscopy was used for morphological characterization, and confirmed that the films covered the pores without filling them. Electrochemical response and capacitance behavior of the electrodes were explored, by cyclic voltammetry. Samples presented high capacitance, confirming that BDUND/PS electrodes are promising for application as electrochemical capacitors.

This paper presents the electrolyte influence on deposition and dissolution processes of Cu nanoparticles on boron doped diamond electrodes (BDD). Morphological, structural and electrochemical analysis showed BDD films with good reproducibility, quality and reversible in a specific redox system. Electrodeposition of Cu nanoparticles on DDB electrodes in three different solutions was influenced by pH and ionic strength of the electrolytic medium. Analyzing the process as function of the scan rate, it was verified a better efficiency in 0,5 mol L-1 Na2SO4 solution. Under the influence of the pH and ionic strength, Cu nanoparticles on DDB may be obtained with different morphologies and it was important for defining the desired properties.

The structural and surface properties of reticulated vitreous carbon (RVC) were discussed as a function of its heat treatment temperature (HTT), for samples produced in the range from 700 to 2000 ºC, using the furfuryl precursor resin. The samples were analyzed by x-ray photoelectron spectroscopy, first and second order Raman scattering as well as electrochemical response. Exploring the material turbostraticity concept, the interdependence between the RVC chemical surface variation and its defects were demonstrated. The influence of heteroatom presence was discussed in the material ordering for HTT lower than 1300 ºC while the graphitization process evolution was also pointed out for HTT higher than 1500 ºC.

Titanium is an attractive material for structural and biomedical applications because of its excellent corrosion resistance, biocompatibility and high strength-to-weight ratio. The high reactivity of titanium in the liquid phase makes it difficult to produce it by fusion. Powder metallurgy has been shown to be an adequate technique to obtain titanium samples at low temperatures and solid-phase consolidation. The production of compacts with different porosities obtained by uniaxial pressing and vacuum sintering is briefly reviewed. Powder particle size control has been shown to be very important for porosity control. Sample characterization was made using scanning electron microscopy (SEM) images.

Electrochemical response of ferri/ferrocyanide redox couple is discussed for a system that uses reticulated vitreous carbon (RVC) three dimensional electrodes prepared at five different Heat Treatment Temperatures (HTT) in the range of 700 °C to 1100 °C. Electrical resistivity, scanning electron microscopy and X ray Diffraction analyses were performed for all prepared samples. It was observed that the HTT increasing promotes an electrical conductivity increasing while the Bragg distance d002 decreases. The correlation between reversibility behavior of ferri/ferrocyanide redox couple and both surface morphology and chemical properties of the RVC electrodes demonstrated a strong dependence on the HTT used to prepare the RVC.

The goal of this work is to show the use of undoped nanodiamond films as a new material for electrochemical and aerospace applications. Correlation between the applications and physico-chemical features of nano and conventional CVD polycrystalline diamond films are presented. An important and innovative application of these nanodiamonds is organic electrosynthesis, including pharmaceutical and water disinfection products, as well as electroanalytical applications, for example, development of biosensors for detection of glucose, glutamate and dopamine. In aeronautics and space developments, these nanodiamonds could be used as electrodes in rechargable batteries and in tribological investigations.

A boron-doped diamond electrode is used for determination of Mn(II) in atmospheric particulate matter by square wave cathodic stripping voltammetry. The analytical curve was linear for Mn(II) concentrations between 5.0 and 37.5 µg L-1, with quantification limit of 3.6 µg L-1. The precision was evaluated by the relative standard deviation, with values between 5.1% and 9.3%. The electrode is free of adsorption, minimizing memory effects. Samples collected in the workplace atmosphere of a foundry had Mn(II) concentrations between 0.4 and 4 µg m-3. No significant differences were observed between the proposed method and inductively coupled plasma optical emission spectroscopy.

This review presents a brief account concerning the production, characterization and evolution of the knowledge in the area of diamond and boron-doped diamond films. The most important methods used for the growth of these films, such as chemical vapor deposition and high pressure/high temperature systems, as well as the several kinds of reactors which can be employed are reviewed. However, larger emphasis is given to the CVD method. Morphological, structural and electric properties of these films, as well as their role in the performance of voltammetric electrodes for electrochemistry and electroanalytical chemistry are also discussed.

Porous silicon layers (PSL) were produced by stain etching from a HF:HNO3 500:1 mixture with etching time varying in the range of 1 up to 10 min. The samples have presented nanometric porosity as a function of etching time, characteristic of heavily doped p type silicon. The residual stress and the correlation length of the layers were obtained through the analysis of the micro-Raman spectra using a phonon confinement model including a term to account for the amorphous phase. The residual compressive stress tends to increase as expected due to the contribution of smaller crystallites to be more representative as the etching time increases. PbTe thin films were electrodeposited on PSL from aqueous alkaline solutions of Pb(CH3COO)2, disodium salt of ethylendiaminetetraacetic acid (EDTA) and TeO2 by galvanostatic and potentiostatic method. It was also obtained nanostructured PbTe thin films with polycrystalline morphology evidenced by X-ray Diffraction (XRD) spectra. Scanning Electron Microscopy (SEM) analysis has demonstrated good films reproducibility with an average grain size of 100 nm.