RESUMO As argamassas de revestimento devem ser capazes de absorver pequenas deformações, de modo a garantir a estabilidade das alvenarias (desempenho e durabilidade). Quando essa premissa não é atendida, há uma maior propensão para o surgimento de fissuras, uma das principais e preocupantes manifestações patológicas em revestimentos argamassados. Uma das alternativas ao combate dessa manifestação patológica é a adição de fibras naturais/artificiais com o intuito de melhorar as propriedades mecânicas (principalmente a resistência à tração) e, consequentemente, a capacidade de deformação das argamassas. Nessa perspectiva, este trabalho analisou o comportamento no estado fresco e endurecido de argamassa com adição de fibras obtidas a partir da palha da carnaúba (Copernicia prunifera), árvore abundante na região do vale do Açu/RN (Brasil). Para tanto, foram produzidas argamassas em proporção em massa de 1:3 (cimento:agregado) com adição de 3% e 5% de fibra da palha da carnaúba (FPC) em relação à massa do cimento e com relação água/cimento (a/c) fixa em 0,72 para todas as misturas. Os efeitos da utilização de fibras com diferentes comprimentos (20, 40 e 60 mm) também foi investigado. As propriedades das argamassas foram avaliadas no estado fresco (consistência) e endurecido (resistência à compressão e à tração na flexão). Os resultados indicaram que a adição de FPC resulta em argamassa com menores consistência e resistências mecânicas. Entretanto, em geral, o melhor desempenho foi obtido para adições de até 3% e maiores comprimentos de fibra (20 mm).
ABSTRACT The rendering mortars must be able to absorb small deformations, in order to guarantee the stability of the masonry (performance and durability). When this premise is not met, there is a greater propensity for the appearance of cracks, one of the main and worrying pathological manifestations in mortar coverings. One of the alternatives to combat this pathological manifestation is the addition of natural/artificial fibers in order to improve the mechanical properties (mainly the traction strength) and, consequently, the deformation capacity of the mortar. In this perspective, this work analyzed the behavior in the fresh and hardened state of mortars with the addition of fibers obtained from the straw of the carnauba (Copernicia prunifera), an abundant tree in the region of the Açu valley/RN (Brazil). For this purpose, mortars were produced in a 1:3 mass ratio (binder:aggregate) with the addition of 3% and 5% fiber from the carnauba straw (CSF) in relation to the cement mass and with the water/cement ratio (w/c) fixed at 0.72 for all mixtures. The effects of using fibers with different lengths (20, 40 and 60 mm) were also investigated. The properties of mortars were evaluated in a fresh (consistency) and hardened (compression and flexural strengths) state. The results indicated that the addition of CSF results in mortar with less consistency and mechanical strength. However, in general, the best performance was obtained for additions of up to 3% and for longer fiber lengths (20 mm).