Aiming to reduce aircraft weight, aeronautic industry seeks alternative materials and processes used to join its different structural parts. An option to traditional methods are high performance adhesive joints, which reduce weight, number of parts and component final cost, also resulting in higher strength structures. Although, the lack of experimental data to provide a detailed structural characterization of these joining techniques had limited their commercial application. The proposal of this work is to investigate the Mode I interlaminar fracture toughness under quasi-static loading using DCB specimens of carbon composite joints made by co-bonding and secondary bonding techniques, the latter giving more reliable results. For a better understanding on the failure in the systems, DSC and microscopy techniques were applied, from which three stages of delamination process during testing were observed: 1st Stage) Cohesive failure represented by an unstable crack propagation from a high energy level; 2nd Stage) transition from cohesive to adhesive and final intralaminar failure mode with lower energy levels than Stage 1; and 3rd Stage) completely stable propagation at low energy levels (delamination migrates from intralaminar to interlaminar, entirely in the substrate).

ABSTRACT: The developments of innovative adaptive structures on Unmanned Aerial Vehicles (UAVs), such as morphing wings, can potentially reduce system complexities by eliminating control surfaces and their auxiliary equipment. This technology has the potential of allowing a UAV to adapt to different mission requirements or to execute a particular mission more effectively by maintaining an optimum airfoil section over a range of speeds for different segments of a mission profile. Studies on a number of smart materials candidates are currently available in the open literature to achieve wing morphing. The material selection depends on several factors including fast dynamic response, low weight, capability to operate over a wide range of flight conditions and low power consumption. This paper presents a review on smart materials technologies for UAV morphing wings. A numerical study in terms of power requirements is also presented for two morphing wing concepts: flapped and twisted wing planforms. The energy calculations for both morphing configurations were based on a two-step procedure. The first step consists of computing the aerodynamic energy using an in-house Vortex-Lattice (VL) based program. Subsequently the pressure field obtained from the first step is then mapped into a finite element mesh and the structural strain energy is calculated. The numerical results indicated that flapped morphing wings have a better aerodynamic performance when compared to twisted wings and different morphing levels can be achieved using lighter smart materials with lower specific energy for this configuration.