ABSTRACT The use of polymeric compounds is limited to sealing masonry in Brazil, due to the criteria of the NBR 16590 [1]. However, one must evaluate how much this material can contribute when applied to structural masonry. Thus, this study investigated the operation of a type of polymeric compound when applied in structural masonry, performing chemical and physical characterization tests and adhesion at the interface between block and binder. Besides these, we investigated the axial compressive strength of full-scale walls was investigated. One sample was made with horizontal joints filled with cementitious mortar and two containing polymeric compound, with 2 and 4 fillets for settlement the blocks. The characterization results of the binder material and interface showed that the polymeric compound has greater resilience and better adherence performance when compared to cementitious mortar. In the overall analysis of the system, it was found that masonry built with 4 fillets of polymeric composite achieved the same compressive strength of the sample built with conventional cement mortar (~ 138 kN/m at break), the sample with 2 fillets presented higher vertical deformation, 25% in relation to the others, showing the potential use of the polymeric compound in structural masonry. Brazil 1659 1. 1 . [1] However Thus these fullscale full scale blocks system ~ ( 13 kNm kN m break, break , break) deformation 25 others 165 [1 16 [
RESUMO O uso dos compostos poliméricos se limita às alvenarias de vedação no Brasil, devido aos critérios da NBR 16590 [1]. No entanto, deve-se avaliar o quanto este material pode contribuir quando aplicado em alvenarias estruturais. Sendo assim, esse estudo investigou o funcionamento de um tipo de composto polimérico, quando aplicado em alvenarias estruturais, realizando ensaios de caracterização química e física do material e de aderência na interface entre bloco e o ligante. Além dessas, foram investigadas a resistência à compressão axial de paredes em escala real, sendo uma amostra executada com as juntas horizontais preenchidas por argamassa cimentícia e outras duas contendo composto polimérico, com 2 e 4 filetes para assentamento dos blocos. Os resultados de caracterização do material ligante e interface mostraram que o composto polimérico possui maior resiliência e melhor desempenho à aderência, quando comparado à argamassa cimentícia. Já na análise global do sistema, verificou-se que a alvenaria construída com 4 filetes de composto polimérico atingiu a mesma resistência à compressão da amostra construída com argamassa cimentícia convencional (~138 kN/m na ruptura), a amostra com 2 filetes apresentou maior deformação vertical, 25 % em relação as demais, mostrando o potencial de utilização do composto polimérico em alvenaria estrutural. Brasil 1659 1. 1 . [1] entanto devese deve estruturais assim dessas real blocos sistema verificouse verificou ~138 138 (~13 kNm kN m ruptura, ruptura , ruptura) vertical demais estrutural 165 [1 ~13 13 (~1 16 [ ~1 (~ ~ (