A study has been made of the influence of a superimposed mean shear stress on the capability of some multiaxial high cycle fatigue criteria to predicting fatigue behavior of 42CrMo4 and 34Cr4 alloy steels. Five selected critical plane-based criteria, namely Matake (M), Susmel & Lazzarin (S&L), Findley (F), Carpinteri & Spagnoli (C&S) and Liu & Mahadevan (L&M), were applied to a number of published experimental fatigue resistance limit tests, involving synchronous sinusoidal in-phase and out-of-phase bending and torsion. Applying to the same loading conditions a mesoscopic scale-based criterion proposed by Papadopoulos (P), one could verify that predictive capability of such an approach is almost invariably superior to those associated with the M, S&L, F, C&S and L&M models. As the Papadopoulos criterion is independent of mean shear stress, it seems appropriate to conclude that the inclusion of such a stress as loading parameter in the critical plane-based models does, in fact, exert a negative influence on their predictive capability. Finally, it is worth mentioning that, except for the Matake, S&L and L&M criteria, the other critical plane-based criteria exhibit a dependence of the fatigue resistance in pure torsion with respect to a superimposed mean shear stress, in disagreement with well-established experimental observations.

RESUMO Esse trabalho apresenta um estudo comparativo do comportamento mecânico de vigas pré-moldadas de concreto armado convencional (CCP), fabricadas por uma empresa local e de concretos geopolimérico de metacaulim (CCG) e geopolimérico com 20% de cinza volante e silicato de cinza de casca de arroz (CCG-20CVCCA), como matrizes substitucionais. Os resultados mostraram que os concretos geopoliméricos apresentaram comportamento similar ao do CCP, na mesma classe de resistência do concreto, taxa de armadura e disposição das armaduras no elemento estrutural estudado. O uso das cinzas promoveu aumento do módulo de rigidez à flexão e dos limites de deformação das vigas geopoliméricas, em especial para a CCG-20CV-CCA sob a maior taxa de armadura. Os padrões de fissuração e os modos de ruptura encontrados foram similares àqueles mostrados pelo CCP, com a conclusão, neste estudo de caso, de que as vigas pré-moldadas, como fabricadas pela empresa, foram superarmadas ao longo do bordo superior. Embora o dimensionamento da viga não tenha sido objeto deste estudo, foi mostrado que o concreto geopolimérico pode substituir plenamente o CCP, em concreto armado, abrindo oportunidade de uso dos mesmos códigos de dimensionamento desenvolvidos para este material tradicional.

ABSTRACT This work presents a comparative study of the mechanical behavior of precast concrete beams (CCP), manufactured by a local company and geopolymer concrete of metakaolin (CCG) and geopolymer concrete with 20% of fly ash and rice husk ash silicate (CCG-20CV-CCA), as substitutional matrices. The results showed that the geopolymer concretes presented similar behavior to the CCP, in the same class of concrete strength, reinforcement rate and arrangement in the structural element studied. The use of the ashes promoted an increase of the flexural stiffness modulus and the limits of deformation of the geopolymer beams, in particular for the CCG-20CV-CCA under the highest reinforcement rate. The cracking patterns and failure modes found were similar to those shown by CCP, with the conclusion, in this case study, that precast beams, as manufactured by the company were super-reinforced along the top of the beams. Although the dimensioning of the beam has not been the object of this study, it has been shown that the geopolymer concrete can completely replace the CCP in reinforced concrete, opening up the opportunity to use the same structural design codes developed for this traditional material.

Geopolymeric materials have some unique properties such as early-high compressive strength, durability, resistance to acids and sulfates, ability to immobilize toxic and radioactive compounds, low porosity and high temperature resistance. These materials are strategic for sustainable development and are a suitable alternative to Portland cement. The use of phyllite as a geopolymer precursor is encouraged by its abundance, low cost, and the fact that it is already applied in ceramic industries as a kaolin substitute. The objective of this paper is the physicochemical characterization of geopolymeric resin using two pulverized phyllite rocks as precursors with STEM, XRD and XRF techniques. It was found that both phyllite rocks studied have a high quartz content of approximately 50% (weight), which have a "filler" function in the microstructure of the resin helping stabilize residual tensions after curing. Kaolinite and muscovite minerals are present in up to 40% (weight) and are responsible for the high compressive strength of the geopolymer resins.

Geopolymers are exclusively mineral nature and are considered an alternative to materials based on Portland clinker, whose production accounts for about 5% of anthropogenic CO2 emissions in the world. The geopolymer cement concrete (GCC) may be prepared from natural oxide-aluminosilicates such as metakaolin (MK), or synthetic, such as fly ash (FA) together with active silica contained in the rice husk ash (RHA). The fracture properties of the Portland cement concrete (PCC) with 25 MPa and 50 MPa, and of three different geopolymeric concretes with the same strength Classes were determined for comparative analysis. The aim of this study is to provide support to begin the use of geopolymers in the reinforced concrete precasting Industry. Three-point bending tests of notched beams with a/d (notch depth/beam depth) of 0.5 from RILEM TC80-FMT Recommendations were used to determine the critical values of K, G, R and J-integral for crack propagation under mode I. The results showed that the geopolymeric concretes exhibit similar mechanical behavior and fracture properties higher that those determined in PCC for the same strength class.

A 2D finite element analysis was applied to calculate shear and von Mises equivalent stresses developed, under masticatory loading, in an upper central incisor restored with cast gold post and carbon fiber reinforced epoxy resin post. Based on the predicted shear stress levels, it is concluded that the gold post model is more prone to shear failure along the post-dentin interface. Whereas shear stress concentration also occurs in both models at the core-crown interface, the stress level predicted there is higher for the carbon fiber post model which would be more susceptible to crown displacement. Finally, the prediction of von Mises equivalent stress indicates a non-uniform distribution, with the stress preferentially concentrated in the gold post along its interface with the tooth dentin. For the carbon fiber post restored model, on the other hand, the von Mises stresses are more uniformly distributed achieving its maximum level in the tooth dentin.

The use of intra-radicular posts for rebuilding of damaged teeth is a normal practice in contemporary dentistry. However, dental roots restored with posts are subjected to the risk of failure under occlusal loads, particularly in cases of small dentin thickness. This study adopted the finite element analysis to compare the elastic stress distribution in simulated endodontically treated maxillary central incisor restored with two different esthetic posts, a ceramic post and a prefabricated fiber glass post. Under masticatory load, the shear stress and von Mises equivalent stress were determined for the different regions of the two models. The results demonstrated that stress concentrations occurred mainly in the cervical dentin in the prefabricated fiber glass post model. The ceramic post model presented stress concentration in a region limited to the proper post adjacent to its apical end, thus preserving the root dentin.

The aim of this work is to evaluate the applicability of the Wheeler and Willenborg models to predicting fatigue crack growth retardation in a flash welded structural steel subjected to a single overload during constant amplitude (CA) fatigue crack propagation test. Compact tension specimens, in different microstructural conditions, were subjected to a single overload at a given crack length during CA fatigue loading and crack growth rate da/dN vs. the stress intensity factor range deltaK was monitored, evidencing the retardation in crack propagation over an interval of crack length. The size of the delay zone as well as the number of the delay cycles were predicted by both the Wheeler and Willenborg models and then compared with the experimental data. Finally, the results are presented and discussed focusing on the comparison between the predictions made by the two models in the light of the experimental data.