This work presents the electrochemical treatment of wastewater of biodiesel production, using DSA based on IrO2 and Nb2O5. The anode was prepared by modified Pechini method and characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD), in order to evaluate structural and morphological properties and by electrochemical impedance spectroscopy, cyclic voltammetry and accelerated stability test to investigate the electrochemical behavior. The SEM image shows the typical mud-cracked layer. By the XRD measurements, the oxides onto the support were crystallized as tetragonal IrO2 and hexagonal Nb2O5. The amount of glycerin and methanol in the wastewater were 1.60 and 0.31% (w/w), respectively. The electrochemical treatment of the wastewater was evaluated by electrolysis at different current densities and time. The total organic carbon (TOC) and UV-Vis spectra were performed during the electrolysis. The UV-Vis spectra obtained during the electrolysis at 100 and 150 mA cm-2, shows the disappearance of an absorption band at 264 nm and the appearance of one at 290 nm, which the absorption increases as current and the time of the electrolysis increases. The electrochemical treatment with the proposed DSA leads to 80% of removal of TOC by electrolysis at 150 mA cm-2 during the first 6 hours of the electrochemical treatment.

A eletrorredução do Dipiridamol (DIP) foi estudada em solução tampão fosfato 0,10 mol L-1 (pH 3,0) em microeletrodo de platina coberto com mercúrio eletrodepositado (Hg-ME), empregando as técnicas de voltametria cíclica, de varredura linear e polarografia. A similaridade entre o perfil voltamétrico obtido com Hg-ME e as ondas polarográficas sigmoidais com correntes limitadas por difusão é demonstrada. Experimentos com eletrodo de gota pendente de mercúrio (HMDE) foram realizados em paralelo para confirmar os resultados obtidos com Hg-ME, os quais indicaram que a reação de redução ocorre em duas etapas irreversíveis com o consumo de dois elétrons e dois prótons por etapa. A corrente limite de difusão, referente à primeira etapa de redução, permitiu estimar o coeficiente de difusão do DIP como sendo igual a 2,04 x 10-5 cm² s-1.

The electroreduction of Dipyridamole (DIP) was studied in 0.10 mol L-1 phosphate buffer solution (pH 3.0) on a mercury coated platinum microelectrode (Hg-ME), employing cyclic, linear sweep voltammetry and polarography techniques. The similarity between Hg-ME voltammetric profile and the sigmoidal polarographic waves both with a diffusion limited current is showed. Experiments with a hanging mercury drop electrode (HMDE) were performed in parallel to confirm the results obtained with Hg-ME, which indicated that the reduction occurs in two irreversible steps involving two electrons and two protons each step. The limiting diffusion current, concerning the first step, allows estimating the diffusion coefficient for DIP as being equal to 2.04 x 10-5 cm² s-1.

A oxidação eletroquímica do dipiridamol (DIP) foi estudada em soluções aquosas acidificadas, empregando-se as técnicas de voltametria cíclica e eletrólise a potencial controlado com eletrodos de platina. Os experimentos de eletrólise foram monitorados por voltametria cíclica com ultramicroeletrodo de platina, espectroscopia de absorção óptica e fluorescência, e a integração da corrente durante a eletrólise resultou em uma carga correspondente a 2 elétrons por molécula de DIP. Os voltamogramas cíclicos registrados para o DIP a baixas velocidades de varredura se caracterizam por um único pico de oxidação em processo controlado por difusão, com o aparecimento do pico de redução correspondente a velocidades de varredura maiores que 1 V s-1. A estequiometria da reação de oxidação obtida a partir de curvas de polarização de estado estacionário resultou em ordens de reação unitária em relação ao DIP e íons H+.

The electrochemical oxidation of dipyridamole (DIP) has been studied in acidified aqueous solutions at platinum electrodes employing cyclic voltammetry and controlled-potential electrolysis. The progress of the anodic oxidation as a function of time was monitored by cyclic voltammetry with platinum ultramicroelectrodes, absorption and fluorescence optical spectroscopies, the resulting integrated charge being indicative of a two electron process. The cyclic voltammograms registered for low scan speeds are characterized by a single irreversible diffusion controlled anodic wave, the related cathodic wave being also observable for scan speeds higher than 1 V s-1. Oxidation reaction stoichiommetric parameters were obtained through Tafel slopes resulting in unitary reaction orders for DIP and H+.