Besides increasing shelf life of fluid milk, milk powder has physical and functional properties that allow it to be used as ingredient. The rehydration process is complex and happens in four steps: wettability, sinkability, dispersibility and solubility. Works have been conducted aiming at the development of an easier, more convenient and reproducible method to evaluate the dissolution properties of dairy powders. Therefore, the aim of this work was to evaluate dispersibility and solubility through particle size distribution in order to establish a new rehydration index for whole milk powder. The particle size distribution and morphological characteristics of seven samples of milk powder (from A to G) were analyzed. Samples F and C differed from the others which formed a similar group. Principal component analysis divided the samples into three different groups, allowing the indication of an efficient rehydration index to determine the powders dispersability.

Resumo O primeiro alimento do bebê é o leite materno, que deve, entre outras funções, atender, principalmente, às necessidades nutricionais e fornecer proteção imunológica. Em alguns casos, mães impossibilitadas de amamentar necessitam de substitutos. Nos dias de hoje, os substitutos que melhor mimetizam o leite humano são as fórmulas infantis. Diferentes rotas tecnológicas podem ser projetadas para produzir fórmulas infantis apresentando o grande desafio: o compromisso entre alimentos seguros e os danos causados pelo tratamento térmico. Este artigo foi elaborado com o objetivo de revisar o conhecimento científico atual sobre como o tratamento térmico afeta os macro e micronutrientes do leite, extrapolando os efeitos esperados para as fórmulas infantis. Os tópicos abordados são: definição e composição das fórmulas infantis, métodos industriais para produção de fórmulas infantis, efeito do tratamento térmico sobre macronutrientes e micronutrientes do leite.

Abstract Breast milk as the children’s primary source of nutrition fulfills the babies’ needs and can also provide immune protection. In some cases, when mothers are not able to breastfeed, an equivalent substitute is required. Nowadays, the best substitutes of the human breast milk are infant formulas. Different technological routes may be designed to produce infant formulas according to the main challenges: the compromise between food safety and heat treatment damage. This article aimed to review the current scientific knowledge about how heat treatment affects the macro and micronutrients of milk, extrapolating the expected effects on infant formulas. The covered topics were: The definition and composition of infant formulas, industrial methods of infant formulas production, the effects of heat treatment on milk macro and micronutrients.

Abstract Nutritionally, cheese and other dairy products have been highlighted especially as a calcium source. Access to minerals is dependent on variables related to diet, lifestyle, and also the health status. This study aimed to evaluate the bioaccessibility and calcium partition in Minas Padrão cheese over its ripening period for experimentally obtained samples. The cheese of the study has been manufactured using two different technologies (A and B). Also to evaluate the evolution of pH over cheese ripening and the influence of calcium partitions in its bioaccessibility along the cheese ripening period. The mean values found for total calcium content were (549 mg⋅100 g-1 – A and 644 mg⋅100 g-1 – B). For calcium in the aqueous phase on average 460 mg⋅100 g-1 – A and 404 mg⋅100 g-1 – B. These and other changes found are possibly due to physicochemical and biochemical changes, especially with respect to pH variations. Calcium bioaccessibility decreased in the beginning and then incresed in the end of the ripening period. The results obtained in this work hopefully may allow further studies and the development of products in which calcium bioaccessibility might be indicated on the product`s label accordingly to its ripening time.

Abstract The objective of this study was to develop, characterize and evaluate the stability of whey protein beverages containing anthocyanins from jabuticaba skins. Beverage formulations containing 0.5% (F1), 2.0% (F2), 4.0% (F3) and 6.0% (F4) of whey proteins and 2.0 mL of the concentrated phenolic extract from jabuticaba skins were developed. Physicochemical parameters (pH, acidity, total soluble solids, protein content, viscosity, color), antioxidant capacity, total anthocyanins and total phenols of the beverages were determined. In addition, a sensory acceptance test and a stability study were performed. The physicochemical analyses indicated that the protein concentration significantly (p < 0.05) affected the values of acidity, total soluble solids, total phenols and antioxidant capacity. The protein content also influenced the total color difference (ΔE) between formulations. The greater differences were observed in the formulation pairs containing low and high protein contents. The formulations F1, F2 and F3 were equally accepted on overall impression and color attributes. The stability study demonstrated that there was no significant change (p > 0.05) in the total anthocyanins and in the physicochemical properties of F3 over storage time, which indicated a good stability and a great market potential of the whey protein beverages containing anthocyanins from jabuticaba skins.

Resumo A importância primária das micelas de caseína reside no fato de que os processos empregados na transformação do leite em quaisquer de seus derivados dependem, direta ou indiretamente, de sua estabilidade ou de sua desestabilização controlada. Assim, o objetivo do presente trabalho é apresentar uma revisão atualizada sobre a organização estrutural das micelas de caseína. Em termos físico-químicos, as micelas de caseína podem ser definidas como agregados supramoleculares esféricos e porosos, altamente hidratados, carregados negativamente, com diâmetro médio de 200 nm, e que apresentam aproximadamente 104 cadeias polipeptídicas. Além de água, as micelas são constituídas por quatro tipos de caseínas, chamadas de αS1, αS2, β, e κ-caseínas, que estão unidas por meio de interações hidrofóbicas e eletrostáticas, e pela presença de minerais, sobretudo sais de fosfato de cálcio, os quais são os principais responsáveis pela manutenção da estrutura micelar. A estabilidade das micelas de caseína é atribuída à presença de uma camada externa difusa, formada basicamente por κ-caseína. Apesar de as propriedades coloidais das micelas de caseína serem conhecidas, ainda não há consenso sobre como as moléculas de caseína estão estruturadas em seu interior. Portanto, os principais modelos que descrevem a organização interna das micelas de caseína são apresentados na parte final do artigo.

Abstract The most relevant aspect concerning casein micelles lies in the fact that all the procedures employed in the transformation of milk into dairy products depend, directly or indirectly, on their stability or their controlled destabilization. Thus, the present paper aimed to present an updated review of the structural organization of casein micelles. Physicochemically, casein micelles can be defined as spherical, porous supramolecular aggregates, highly hydrated, negatively charged, with a mean diameter of about 200 nm, and presenting approximately 104polypeptide chains. Besides water, casein micelles are constituted of four types of casein molecule, namely αS1, αS2, β and κ-caseins, which are held together by means of hydrophobic and electrostatic interactions, and by the presence of minerals, mainly composed of calcium phosphate salts, which are considered the main factor responsible for maintaining the micellar structure. The stability of the casein micelles is attributed to the presence of an outer diffuse layer, basically composed of κ-casein. Although the colloidal properties of casein micelles are well known, there is still no consensus concerning their internal structure. Therefore, the main models describing the internal organization of casein micelles are presented in the final part of this article.

RESUMO: Este estudo teve como objetivo desenvolver e caracterizar bebidas formuladas com proteínas de soro de leite adicionadas de luteína. Bebidas formuladas com 0,5 (F1), 2,0 (F2), 4,0 (F3) e 6,0% m/v (F4) de proteínas de soro caracterizadas fisico-quimicamente e microbiologicamente e, avaliadas sensorialmente. As análises físico-químicas indicaram que o teor de proteína alterou significativamente (P<0,05) os valores de acidez, sólidos solúveis e as coordenadas colorimétricas, foi possível ajustar modelos matemáticos para todas essas variáveis. As análises microbiológicas mostraram contaminação não significativa (P<0,05) durante o processamento que poderia comprometer a qualidade das bebidas. Os teores de carotenoides e a atividade antioxidante não variaram significativamente (P>0,05) com o aumento do teor de proteína. A formulação F2 apresentou a maior aceitação sensorial. As bebidas são uma alternativa promissora para o uso do soro de leite e aumentam o valor agregado do produto pela adição de luteína.

ABSTRACT: This study aimed to develop and characterize beverages formulated with whey protein and added lutein. Beverages formulated with 0.5 (F1), 2.0 (F2), 4.0 (F3) and 6.0% w/v (F4) whey protein were physicochemically and microbiologically characterized, and sensory evaluated. The physicochemical analyses indicated that the protein content significantly changed (P<0.05) the acidity values, soluble solids and the colorimetric coordinates, making possible to adjust mathematical models for all these variables. Microbiological analyses showed no significant contamination (P<0.05) during processing that would compromise drinks quality of the drinks. Carotenoid content and the antioxidant activity did not change significantly (p>0.05) with increased protein content. The F2 formulation showed the highest sensory acceptance. Beverages offer a promising alternative to whey use and enhance the value of the product by the addition of lutein.

ABSTRACT The objective of this study was to evaluate the quality of water purification system and identify the bacteria this system, predict bacterial adherence according to the hydrophobicity of these microorganisms and of the polypropylene distribution loop for purified water. The assessment of drinking water that supplies the purification system allowed good-quality physical, chemical, and microbiological specifications. The physicochemical specifications of the distributed purified water were approved, but the heterotrophic bacteria count was higher than allowed (>2 log CFU mL-1).The sanitation of the storage tank with chlorine decreased the number of bacteria adhered to the surface (4.34 cycles log). By sequencing of the 16SrDNA genes, six species of bacteria were identified. The contact angle was determined and polypropylene surface and all bacteria were considered to be hydrophilic, and adhesion was thermodynamically unfavorable. This case study showed the importance of monitoring the water quality in the purified water systems and the importance of sanitization with chemical agents. The count of heterotrophic bacteria on the polypropylene surface was consistent with the predicted thermodynamics results because the number of adhered cells reached approximate values of 5 log CFU cm-2.

ABSTRACT The ability of pathogens to survive cheese ripening is a food-security concern. Therefore, this study aimed to evaluate the performance of two alternative methods of analysis of Listeria during the ripening of artisanal Minas cheese. These methods were tested and compared with the conventional method: Lateral Flow System™, in cheeses produced on laboratory scale using raw milk collected from different farms and inoculated with Listeria innocua; and VIDAS®-LMO, in cheese samples collected from different manufacturers in Serro, Minas Gerais, Brazil. These samples were also characterized in terms of lactic acid bacteria, coliforms and physical-chemical analysis. In the inoculated samples, L. innocua was detected by Lateral Flow System™ method with 33% false-negative and 68% accuracy results. L. innocua was only detected in the inoculated samples by the conventional method at 60-days of cheese ripening. L. monocytogenes was not detected by the conventional and the VIDAS®-LMO methods in cheese samples collected from different manufacturers, which impairs evaluating the performance of this alternative method. We concluded that the conventional method provided a better recovery of L. innocua throughout cheese ripening, being able to detect L. innocua at 60-day, aging period which is required by the current legislation.

As variações de temperatura que ocorrem durante a cadeia refrigerada da produção leiteira pode interferir na qualidade de alimentos bioativos, como leites fermentados. Bactérias probióticas são usualmente adicionadas a alimentos, visando a oferecer ao consumidor efeitos benéficos. O objetivo deste trabalho foi avaliar a viabilidade de culturas probióticas de bifidobactérias e de cultura starter de Streptococcus thermophilus em leites fermentados, armazenados nas temperaturas de 4 e 10ºC por um período de 28 dias. Culturas comerciais de Bifidobacterium spp. foram adicionadas ao leite fermentado produzido com Streptococcus thermophillus e estocados por 28 dias a 4 e 10ºC. Nesse período, as culturas deBifidobacterium spp. e Streptococcus thermophillus foram monitoradas, com o objetivo de verificar seus comportamentos nas temperaturas de estocagem testadas. As contagens de ambos os micro-organismos não apresentaram variação significativa ao longo do período de estocagem a 4 e a 10ºC (p < 0,05), indicando que as duas temperaturas testadas podem oferecer condições adequadas de conservação desse produto. Os resultados obtidos indicaram que as condições de conservação de alimentos usualmente adotadas para produtos lácteos em estabelecimentos comerciais são adequadas para manter as contagens de bifidobactérias e Streptococcus thermophillus em leites fermentados.

The variations of temperature during the cold chain can impair the quality of live foods, such as fermented milks. Probiotic bacteria are commonly added to food to provide the consumer with beneficial effects. Nevertheless, the concentration of probiotic in the end products should be elevated to ensure functionality. The aim of this study was to evaluate the viability of probiotic strains of bifidobacteria and starter strain of Streptococcus thermophilus in fermented milks at storage temperatures of 4 and 10ºC, for a period of 28 days. Commercial cultures ofBifidobacterium spp. were added to milk fermented byStreptococcus thermophillusand stored for 28 days at 4 and 10ºC. During this period, bifidobacteria and S. thermophilluscultures were monitored to check their behavior in the evaluated storage conditions. Viable bifidobacteria and S. thermophillus counts showed no significant variation during storage at 4 and 10ºC (p < 0.05), indicating that both of these conditions are adequate for maintaining their initial concentrations. The results indicate that the storage conditions usually adopted in sale establishments of dairy products are suitable to maintain bifidobacteria and S. thermophillus cultures in fermented milk.

A indústria de leite e derivados no Brasil lança todos os anos diversos novos produtos no mercado, incluindo produtos de alto valor nutricional e tecnologia de fabricação de baixo custo. Focando neste tema, foi avaliado o efeito do envase a quente de uma bebida a base de soro de leite tratada termicamente após fermentação, e sua conservação à temperatura ambiente, por 84 dias. Durante o processamento, utilizou-se um tratamento térmico brando, aliado ao baixo pH, para que a bebida pudesse ser armazenada a temperatura ambiente. Garrafas PET de 250 mL foram utilizadas para o envase a quente do produto. Para avaliar sua estabilidade durante o armazenamento, foram realizadas periodicamente análises físico-químicas, microbiológicas e análise sensorial. Os resultados obtidos foram analisados por análise de variância e teste de Tukey para comparação de médias. Análises físico-químicas e microbiológicas indicaram que a bebida manteve-se estável; entretanto, o sabor foi alterado ao longo do armazenamento. O baixo custo do processamento e embalagem são benefícios do produto avaliado, podendo-se concluir que a bebida é uma boa forma para a utilização do soro de leite. Uma grande vantagem deste produto é o seu armazenamento à temperatura ambiente, dispensando o uso da refrigeração durante o transporte e acondicionamento em supermercados.

The Brazilian dairy industry launches several new products on the market every year, including products with high nutritional value and low-cost manufacturing technology. Focusing on this issue, a cheese whey beverage thermally treated after fermentation was hot-filled and evaluated for 84 days. During the beverage manufacturing, we applied a mild heat treatment in combination with low pH aiming to store the beverage at room temperature. PET bottles were used to hot filling of the product. To assess the product stability during the storage period, we performed, periodically, physico-chemical, microbiological and sensory analysis. The obtained results were analyzed by the Analysis of Variance and Tukey's test. Physical-chemical and microbiological analysis indicated that the beverage remained stable; however, the flavor was altered during the storage period. Since hot-filling of dairy beverages in PET bottles is a low cost-effective procedure easily deployed in dairy plants, this process allows the productive use of cheese whey. A remarkable advantage of such product is its possible storage at room temperature, reducing distribution and sales expenditures with cooling.

The ability of bacteria to attach to surface and develop into a biofilm has been of considerable interest to food industry. Electrostatic, Lifhistz-van der Waals and Lewis acid-base forces are usually considered responsible for the interactions at the interface of the bacterial adhesion. The study of microbial adhesion thermodynamic is important because it represents the reflection of microbial surface and food processing surface physicochemical characteristics. This review examines the most important aspects involved in bacterial attachment to a surface with emphases in thermodynamics of adhesion process.

O trabalho estabelece a relação entre as diretrizes das políticas públicas de saúde brasileiras e os critérios adotados pela Anvisa para aprovação das alegações de propriedades funcionais e, ou, de saúde para alimentos e para substâncias bioativas e probióticos isolados. Comenta a legislação brasileira sobre alimentos com alegações de propriedades funcionais e, ou, de saúde, novos alimentos e substâncias bioativas e probióticos isolados, evidenciando a obrigatoriedade de registro destes produtos junto aos órgãos competentes. Apresenta as diretrizes da Política Nacional de Alimentação e Nutrição, Política Nacional de Promoção da Saúde, Guia Alimentar para a População Brasileira e Estratégia Global sobre Dieta, Atividade Física e Saúde da Organização Mundial de Saúde. Ressalta a convergência das diretrizes destas políticas que objetivam a redução das doenças crônicas não-transmissíveis na população através da promoção da alimentação saudável e da atividade física. Destaca as orientações direcionadas aos governos e à indústria para a implementação dessas medidas. Apresenta critérios de avaliação da base científica das alegações propostos por órgãos internacionais. Objetiva oferecer subsídios para o entendimento da influência da tecnologia de alimentos sobre a saúde pública e para o entendimento dos critérios adotados pela Anvisa, na avaliação das alegações de propriedades funcionais e de saúde.

This article establishes the relationship between public health policies in Brazil and the criteria adopted by Anvisa for the approval of functional property claims and, or, of health for food and for bioactive substances and isolated products. It also comments on Brazilian Legislation about functional property claimed food and, or, on healthy claimed food, new foods, bioactive substances and isolated probiotics, emphasizing the obligation to registering such products before the competent agencies. It presents the National Feeding and Nutrition Policies directives, National Policy for Health Promotion, Feeding Guide for the Brazilian Population and Global Strategy on Diet, Physical Activity and Health under the scope of World Health Organization. It enhances the convergence of directives of these policies that focus on the reduction of non-transmissible chronic diseases in the public by means of healthy feeding and physical activity. It highlights the orientations directed to governments and to the industry so as to implement these procedures. Through the presentation of evaluation criteria for the scientific basis of the claims, proposed by international agencies, it aims at offering subsidies for the understanding of the food technology over public health, and for the understanding of the criteria adopted by Anvisa for the evaluation of functional property claims and health.