Abstract Biomass was the first material used as a fuel by humanity, being replaced by fossil fuels after the industrial revolution. With the growing of environment discursions and the effects of CO2 emissions, biomass has been gaining strength as a potential alternative to fossil fuels, especially for steelmaking, which is responsible for about 5 to 10% of all CO2 emitted. It is known that biomass, compared to fossil fossils, has a higher volatile content, high moisture and lower calorific value. On the other hand, it has a higher hydrogen content and lower sulfur content (important for the steel industry), in addition it is considered neutral in CO2 emissions. Torrefaction, heating biomass at a temperature between 200-280°C in an oxygen free atmosphere, is an interesting treatment to adapt biomasses for use in the steelmaking processes, mainly in the pulverized material injection into the blast furnace. PCI is an extremely important process for the production of iron in the blast furnace, due to its ability to reduce coke consumption and optimize the operation of the reactor. This article comes with the purpose of presenting a bibliographic review about PCI technique, torrefaction process, biomasses and its applicability in the steel industry. In addition, an economic and environmental analysis of the possible use of biomass in steelmaking processes will be presented. Results shows that the use of torrefied biomass in the injection process is interesting, generating savings of 10 dollars and reduction of 264kg in CO2 emissions per ton of hot metal, with a replacement of 50% of the coal used by biomass.

Abstract The present research is dedicated to analyzing the addition of sawdust biomass, which is a carbonaceous raw material that may be used in coal blends for the production of metallurgical coke, preserving the required quality, with lower cost. The quality of metallurgical coke may be determined by the efficiency of its chemical, physical and thermal functions inside the blast furnace. For the production of hot metal, any modification in the constituents of the raw materials may have a direct influence on the blast furnace productivity and in the final quality of steel. From the thermal degradation analyzes such as coke reactivity index (CRI) and coke strength reaction (CSR), cold resistance (DI) and immediate analyzes, it may define the quality of metallurgical coke produced with biomass aiming at relating the parameters that interfere in the particularities of the material function in the blast furnace. Some results show that it is possible to use 2% of eucalyptus sawdust in the coal mixture.

Abstract The injection of pulverized materials is a technique used in most of the blast furnaces in the world to reduce coke and charcoal consumption. In addition, injection is one of the main variables of the blast furnace heat control. Coal is the most used material for the injection, but some industries have been attempting to use other materials, usually mixtures, in order to reduce the total dependence on it. The quality of the injected material influences some operational parameters, such as the permeability, the heat control, and also the quality of the hot metal produced. Due to these factors, the strategy and quality of these materials should be planned and evaluated using quality indicators to achieve good production, with low cost and environmental impact. In this context, there is a large number of researches on different materials, especially waste from iron and steelmaking processes, among others. Herein, some quality indicators of different materials tested on industrial and laboratory scales were analyzed compared, and the feasibility of using new materials injected into the blast furnace was discussed.