Three types of propolis extract were prepared and analyzed with respect to their global extraction yields and with respect to the concentration of the following markers: 3,5-diprenyl-4-hydroxycinnamic acid; 3-prenyl-4-hydroxycinnamic acid; 4-hydroxycinnamic acid and 4-methoxy-3,5,7-trihydroxyflavone. The extract EEP (ethanolic extract of propolis) was obtained by the conventional method from raw propolis using ethanol as solvent. The extracts (SFE) were obtained by supercritical solvent extraction from the raw propolis using supercritical carbon dioxide (sc-CO2), with and without the addition of ethanol as a co-solvent. The fractionated supercritical extracts (FSCE) were obtained by fractionation (extract and raffinate) of the dry EEP with sc-CO2. EEP yields of 39.5% were obtained and maximum global extraction yields were 7.3% for SFE with no co-solvent, 51% for SFE with 15% ethanol and 18% for the FSCE extract fraction. The concentrations of the markers in the different extracts differed as a function of the operational parameters, indicating that the addition of co-solvent and the selectivity of sc-CO2 could be manipulated so as to obtain extracts with the yields and concentrations of interest.

The solubility of 93% pure bixin in supercritical carbon dioxide (SC-CO2) and of the bixin present in annatto seeds (Bixa orellana L.) was measured. For the seeds, the measurements were made in a temperature range from 30 to 50ºC and pressure between 10 and 35 MPa and for the pure bixin, at 40ºC from 10 to 35 MPa. The main pigments of annatto seeds are bixin and norbixin, but the extracts only showed the presence of cis and trans-bixin, indicating that norbixin is not soluble in SC-CO2. The annatto seeds used in the experiments contained about 2.7% bixin and 3.1% oil. In the seeds, the crossover point of solubility was at about 28 MPa and values for solubility were about ten times higher than those of the pure bixin, giving evidence that the oil acted as a co-solvent with the CO2.

The essential oil of key lime (Citrus aurantifolia) was obtained by steam distillation at normal conditions (1.0 bar/25ºC) with steam at 110ºC, during 10h. The GC analysis identified about 10 main substances, being limonene, p-cymene, myrcene and beta-bisabolene the most significant compounds. Aldehyde content increased significantly during distillation time (upper phase). After 10h of process, oil has presented more than 3% of aldehydes content due to oxidative reactions.

Fe10Ag90 granular alloys have been fabricated, using a sol-gel method, for a range of nitric acid concentrations in the start solution. The samples have been characterized by X-ray diffraction and magnetization measurements. The average Fe particle sizes derived from X-ray diffraction are in the range 24-29 nm, indicating a large variation. The coercivity obtained from the hysteresis curve is two orders of magnitude larger that of pure iron in all the samples. Moreover, the hysteresis curves do not saturate, even in fields of up to 1 T. These observations indicate that the samples contain both superparamagnetic and blocked particles. A comparison between the coercive field and the average particle diameter, determined by the Sherrer's formula, is displayed in all acid concentrations.