Abstract The industries that have polymers as an important raw material in their production, such as the construction, automotive, electrical and electronic sectors, always seek innovations to cut costs, reduce weight, easiness of processing, maximizing mechanical properties, and recyclability. In this context, this work presents the study of the kinetic parameters and viscoelastic behavior of a new thermoplastic system initially liquid. Through differential scanning calorimetry (DSC) analysis, Brookfield viscosimetry; dynamic-mechanical analysis (DMA) and mathematical modeling with consolidated and standardized methods, it was possible to evaluate the polymerization kinetics and viscoelastic behavior of the material in solutions with different concentrations. The generated equations allow the prediction of the kinetic and gelation behavior of the material reducing the need for laboratory tests to determine polymer properties. The found results showed that concentrations of benzoyl peroxide initiator with 1wt% in the methyl methacrylate (MMA) copolymer solution have the best viscoelastic and dynamic-mechanical properties with a less expensive polymerization cycle. production construction automotive sectors costs weight processing recyclability context liquid DSC (DSC viscosimetry dynamicmechanical dynamic DMA (DMA methods 1wt wt MMA (MMA cycle

Abstract Factors such as project and execution errors, lack of maintenance and inspection, and increases in loading can cause deficiencies to reinforced concrete structures. In this regard, there is the necessity of the application of structural reinforcement systems. This manuscript aims at the structural capacity analyses involving the bending of steel-reinforced concrete beams with additional reinforcement of polymer composites using glass and carbon fibers, and its comparison with regular reinforced concrete beams. Steel-reinforced concrete, polymeric composite, and hybrid beams (steel-reinforced concrete and polymeric composite combined) were submitted to the four-points bending test. Experimental and calculated results for the dimensioning of the beams were compared, allowing the validation of the calculation method and its implementation. It was possible to notice both the efficiency of the composite material applied as reinforcement, as well as the efficiency of the calculation models applied in this work.