The great technological advancement in wireless communication systems and devices generated the problem of electromagnetic pollution. Developing lightweight, sustainable, and low-cost materials is necessary to minimize electromagnetic pollution. A sustainable porous carbon (PC) absorber material was obtained from the crude black liquor by a simple and low-cost synthesis, and combined with carbon nanotube (CNT), presenting excellent microwave attenuation results. The PC absorber at 20 wt.% filling ratio exhibited an intense reflection loss of ‑35.7 dB at 15.5 GHz, and bandwidth of 1.15 GHz for a thickness of 5.90 mm. By adding 0.2 wt.% of CNT, the reflection loss was -34.6 dB at 17.9 GHz, and a bandwidth of 1.54 GHz for 4.90 mm. The study reveals that the combination of PC and CNT improves the attenuation capacity, allows adjustment in the frequency range of the attenuation peak, and promotes thickness reduction. The results obtained allow us to advance studies in developing high-performance, sustainable, and low-cost microwave-absorbing materials.

Abstract Carbonaceous porous materials are strong candidates for producing low-cost, lightweight, and sustainable electromagnetic (EM) absorbing materials. This work investigates the production of radar-absorbing materials (RAM) by a simple method. Sustainable carbon xerogel (CX) was synthesized from tannin, a biosourced molecule. CX and commercial carbon nanotube (CNT) were embedded in a silicone matrix at proportions of 10 and 15 wt.% of CX and 0.1 wt.% of CNT to produce flexible composites. The morphology and structure of the carbonaceous materials were evaluated by field-emission scanning electron microscopy (FEG-SEM), Raman spectroscopy, X-ray diffraction (XRD), textural properties by N2 adsorption-desorption isotherms, and mercury porosimetry. The electromagnetic characterization of the composites was analyzed by a vector network analyzer (VNA) in the Ku-band. The results demonstrated that an increased concentration of CX in the composite improved reflection loss reaching -43.19 dB at 13.79 GHz.

ABSTRACT Radar absorbing materials (RAMs) are composites made with a polymeric matrix and an electromagnetic absorbing filler, such as carbon black (CB), silicon carbide (SiC) or manganese zinc ferrite (MnZn). To enhance their performances to attenuate an incident wave through reflection loss (RL), RAMs can be produced in multilayer structures. Usually, the RL analysis is done theoretically and experimentally validated with free space analysis. Here, it was demonstrated that multilayer structure can be designed and easily validated using rectangular waveguide, using a simpler setup and small samples. Three composites were produced using 2 wt% of CB (CB2), 40 wt% of SiC (SiC40) and 60 wt% of MnZn (MnZn60). They were characterized over the Ku-band and used to validate the multilayer structures, that were prepared by simply stacking each material inside the waveguide sample holder. One of the best results was obtained with structure SiC40+CB2 with 5.85 mm thickness, that presented a calculated RL of -21 dB at 17.8 GHz and a measured RL of -36 dB at the same frequency. In conclusion, using rectangular waveguide has been proven to be an easy, cheap, precise and fast approach to validate multilayer structures designs.

ABSTRACT Radar Absorbing Materials (RAMs) are composite materials able to attenuate an incident electromagnetic wave. Usually, RAMs are made of a polymeric matrix and an electromagnetic absorbent filler, such as silicon carbide or carbon black. Several materials have been investigated as potential fillers, aiming to improve the Reflection Loss (RL) and absorption bandwidth broadening. In this paper, a composite made with silicone rubber and biochar was investigated as a sustainable porous carbon made with biomass waste. Five different composites were characterized, composed of 1 - 5 wt.% of biochar in the silicone rubber. Although the RL of pure biochar composites is not significant, it was demonstrated here how a biochar composite can improve the RL of a RAM material when it is applied as a double-layer structure. While the RL of a ferrite-based RAM with 2.0 mm thickness reaches -28 dB, a combination of this RAM with biochar composite reaches ~ -60 dB with the same thickness. The double-layer structure with 2.3 mm thickness can have an absorption bandwidth of 2.95 GHz over the X-band frequency range, and a structure with 2.6 mm thickness can reach a RL of ~ -76 dB. This demonstrates a sustainable, cheaper, and lighter material application (i.e., biochar), which is successfully used in the development of high-efficient electromagnetic shield or sensors.

RESUMO Este trabalho apresenta as propriedades eletromagnéticas de um Material Absorvedor de Radiação Eletromagnética (MARE) feito a partir de Carbeto de Silício (SiC) e Negro de Fumo (NF) como aditivos. O compósito SiC/NF foi produzido utilizando 70 %(m/m) de matriz de silicone, e variando as concentrações do aditivo em 3 %(m/m), 2 %(m/m) e 1 %(m/m) de NF com 27 %(m/m), 28 %(m/m) e 29 %(m/m) de SiC, respectivamente. A estrutura química e a morfologia das partículas de SiC e NF foram analisadas através de espectroscopia Raman e Microscopia Eletrônica de Varredura (MEV). As propriedades dielétricas dos MAREs foram obtidas por meio do analisador de rede vetorial na faixa de frequência de 12,4 a 18,0 GHz. Os resultados de refletividade mostraram que o compósito SiC/NF com 1 %(m/m) de NF apresentou a melhor absorção de radiação eletromagnética, chegando a -47,9 dB em 16,8 GHz com uma amostra de aproximadamente 5,5 mm de espessura.

ABSTRACT Este trabalho apresenta as propriedades eletromagnéticas de um Material Absorvedor de Radiação Eletromagnética (MARE) feito a partir de Carbeto de Silício (SiC) e Negro de Fumo (NF) como aditivos. O compósito SiC/NF foi produzido utilizando 70 %(m/m) de matriz de silicone, e variando as concentrações do aditivo em 3 %(m/m), 2 %(m/m) e 1 %(m/m) de NF com 27 %(m/m), 28 %(m/m) e 29 %(m/m) de SiC, respectivamente. A estrutura química e a morfologia das partículas de SiC e NF foram analisadas através de espectroscopia Raman e Microscopia Eletrônica de Varredura (MEV). As propriedades dielétricas dos MAREs foram obtidas por meio do analisador de rede vetorial na faixa de frequência de 12,4 a 18,0 GHz. Os resultados de refletividade mostraram que o compósito SiC/NF com 1 %(m/m) de NF apresentou a melhor absorção de radiação eletromagnética, chegando a -47,9 dB em 16,8 GHz com uma amostra de aproximadamente 5,5 mm de espessura.

In this manuscript, the electromagnetic wave absorption properties of sustainable porous carbon composites were evaluated over the X-band frequency range (8.2 - 12.4 GHz). The porous carbon material was made from the byproduct of cellulose production and was used as additive on the development of radar absorbing material (RAM) composites. These porous carbon materials have different characteristics, such as porosity size (180 µm < Ø1 < 250 µm and 425 µm < Ø2 < 500 µm) and particle size (ϕ1 < 250 µm and 250 µm < ϕ2 < 425 µm). Composite materials were also studied as frequency selective surface (FSS) structures. It was shown how complex permittivity and reflection loss (RL) can be manipulated over the frequency range using FSS structure. While regular RAM presented RL of 19 dB at ~11.8 GHz, FSS structure presented a RL of 19 dB shifted to 12.4 GHz regarding the same carbon porous material (with particles between 250 and 425 µm and porosity between 180 and 250 µm). It was demonstrated here the potential use of sustainable porous carbon as RAM, and how FSS structure can be used to tune the frequency of the RL maximum peak.

ABSTRACT: This study presents the complex index of refraction and the complex permittivity of a magnetic ceramic material made of copper, cobalt, and iron oxides. The index of refraction and the extinction coefficient of the CuCo-ferrite exhibit an almost frequency independent behavior and were averaged to n = 3.62 ± 0.05 and k = 0.06 ± 0.02, respectively, over the frequency range from 0.2 to 1 THz. The corresponding complex permittivity was ε' = 13.12 ± 0.35 for the real part and ε'' = 0.46 ± 0.15 for the imaginary one. The absorption coefficient and the transmittance of the CuCo-ferrite were also determined. The absorption coefficient exhibits a dip at ~0.35 THz, which corresponds to a peak in transmittance at this frequency. The impact of the observations on the potential realization of novel THz electronic devices is discussed.