ABSTRACT present study aimed to determine the effects of different light restriction levels (shading levels) on soybean genetic parameters using a Bayesian multi-trait model (MTM) and select high-yielding soybean cultivars. Eighteen commercial soybean cultivars bred in a soybean breeding program were evaluated over two agricultural seasons. Three shading levels were used over two agricultural crop seasons, giving six treatments (light restriction × crop season). The experiments were arranged in a randomized complete block design with six treatments replicated thrice. The genetic values and parameters were estimated using a Monte Carlo Markov Chain algorithm. Broad-sense heritability range from 0.2093 to 0.7153. The lowest genotypic variance estimate was observed at the 45 % photosynthetically active radiation level in the 2019/2020 crop season year compared with that of other shading levels. Furthermore, a 40 % selection intensity had the highest soybean yield under different shading levels. The Bayesian MTM combined with the factor analysis and genotype-ideotype distance method can be used to evaluate and select soybean genotypes considering different shading levels. The soybean cultivars 8579RSF, NS8338, NS7901, NS7667, RK8115, and 8473RSF had higher genetic potential than other cultivars under different shading levels. multitrait multi trait (MTM highyielding high yielding seasons season. . season) thrice algorithm Broadsense Broad sense 02093 0 2093 0.209 07153 7153 0.7153 4 20192020 2019 2020 2019/202 Furthermore genotypeideotype genotype ideotype 8579RSF RSF NS8338 NS NS7901 NS7667 RK8115 RK 0209 209 0.20 0715 715 0.715 2019202 201 202 2019/20 NS833 NS790 NS766 RK811 020 20 0.2 071 71 0.71 201920 2019/2 NS83 NS79 NS76 RK81 02 2 0. 07 7 0.7 20192 2019/ NS8 NS7 RK8

RESUMEN Objetivos: evaluar el rendimiento predictivo de diferentes algoritmos de inteligencia artificial para estimar el tiempo de ejecución del baño en cama en pacientes críticos. Métodos: estudio metodológico, que utilizó algoritmos de inteligencia artificial para predecir el tiempo de baño en cama en pacientes críticos. Se analizaron los resultados de modelos de regresión múltiple, redes neuronales perceptrón multicapa y función de base radial, árbol de decisión y random forest. Resultados: entre los modelos evaluados, el modelo de red neuronal con función de base radial, que contiene 13 neuronas en la capa oculta, presentó el mejor desempeño predictivo para estimar el tiempo de ejecución del baño en cama. En la validación de datos, la correlación al cuadrado entre los valores predichos y los valores originales fue del 62,3%. Conclusiones: el modelo de red neuronal con función de base radial mostró mejor rendimiento predictivo para estimar el tiempo de ejecución del baño en cama en pacientes críticos. Objetivos críticos Métodos metodológico múltiple forest Resultados evaluados 1 oculta datos 623 62 3 62,3% Conclusiones 6 62,3 62,

ABSTRACT Objectives: to assess the predictive performance of different artificial intelligence algorithms to estimate bed bath execution time in critically ill patients. Methods: a methodological study, which used artificial intelligence algorithms to predict bed bath time in critically ill patients. The results of multiple regression models, multilayer perceptron neural networks and radial basis function, decision tree and random forest were analyzed. Results: among the models assessed, the neural network model with a radial basis function, containing 13 neurons in the hidden layer, presented the best predictive performance to estimate the bed bath execution time. In data validation, the squared correlation between the predicted values and the original values was 62.3%. Conclusions: the neural network model with radial basis function showed better predictive performance to estimate bed bath execution time in critically ill patients. Objectives patients Methods study analyzed Results assessed 1 layer validation 623 62 3 62.3% Conclusions 6 62.3 62.

RESUMO Objetivos: avaliar a performance preditiva de diferentes algoritmos de inteligência artificial para estimar o tempo de execução do banho no leito em pacientes críticos. Métodos: estudo metodológico, que utilizou algoritmos de inteligência artificial para predizer o tempo de banho no leito em pacientes críticos. Foram analisados os resultados dos modelos de regressão múltipla, redes neurais perceptron multicamadas e função de base radial, árvore de decisão e random forest. Resultados: entre os modelos avaliados, o modelo de rede neural com função de base radial, contendo 13 neurônios na camada oculta, apresentou melhor performance preditiva para estimar o tempo de execução do banho no leito. Na validação dos dados, o quadrado da correlação entre os valores preditos e os valores originais foi de 62,3%. Conclusões: o modelo de rede neural com função de base radial apresentou melhor performance preditiva para estimar o tempo de execução do banho no leito em pacientes críticos. Objetivos críticos Métodos metodológico múltipla forest Resultados avaliados 1 oculta dados 623 62 3 62,3% Conclusões 6 62,3 62,

ABSTRACT Species within the genus Corymbia are regarded as potential alternatives to Eucalyptus. In addition to having superior wood quality, Corymbia spp. are tolerant to most pests, diseases, and abiotic stresses that affecting Eucalyptus plantations, including physiological disorders, water deficit, and wind damage. However, environmental stresses stimulate kino production, which decreases the quality of pulp and sawn wood. This study aimed to develop a method for evaluating kinoand estimate genetic parameters in Corymbia. For this, 16 Corymbia (C. citriodora × C. torelliana) hybrid clones and 5 clones of Eucalyptus were used. Two evaluation methods (M1 and M2) were tested for kino evaluation; M1 consisted of drilling the bark with Pilodyn and M2 consisted of drilling the heartwood with Pilodyn. The following kino parameters were evaluated: exudation incidence, exudate length which flowed over the stem, and exudate weight. Genetic parameters were estimated by a mixed model method (REML/BLUP). The significance of random effects of the statistical model was tested by the likelihood ratio test. Significant clone effects were obtained for all kino parameters, except for exudate length as assessed by M2. Kino parameters determined by M1 exhibited higher heritability and accuracy. Therefore, M1 should be preferred for kino evaluation in Corymbia. spp pests diseases plantations disorders deficit damage However production this 1 C (C torelliana used M (M evaluated incidence stem weight REML/BLUP. REMLBLUP REML/BLUP . REML BLUP (REML/BLUP) test accuracy Therefore (REML/BLUP

RESUMO Espécies do gênero Corymbia são consideradas potenciais alternativas ao eucalipto. Além de possuir madeira de qualidade superior, Corymbia spp. são tolerantes à maioria das pragas, doenças e estresses abióticos que afetam as plantações de eucalipto, incluindo distúrbios fisiológicos, déficit hídrico e danos causados pelo vento. No entanto, as tensões ambientais estimulam a produção de kino, o que diminui a qualidade da celulose e da madeira serrada. Este estudo teve como objetivo estabelecer um método para avaliação de kino e estimativa de parâmetros genéticos em Corymbia. Para isso foram utilizados 16 clones híbridos de Corymbia (C. citriodora × C. torelliana) e 5 clones de Eucalyptus. Dois métodos (M1 e M2) foram testados para avaliação; M1 consistiu na perfuração da casca com Pilodyn e M2 consistiu na perfuração do cerne com Pilodyn. Foram avaliados os seguintes parâmetros: incidência de exsudação, comprimento do exsudato que fluiu sobre o caule e peso do exsudato. Os parâmetros genéticos foram estimados por um método de modelo misto (REML/BLUP). A significância dos efeitos aleatórios do modelo estatístico foi testada pelo teste da razão de verossimilhança. Efeitos clones significativos foram obtidos para todos os parâmetros, exceto para o comprimento do exsudato avaliado por M2. Os parâmetros determinados por M1 apresentaram maior herdabilidade e precisão. Portanto, M1 deve ser preferido para avaliação de kino em Corymbia. eucalipto superior spp pragas fisiológicos vento entanto serrada 1 C (C torelliana Eucalyptus M (M exsudação REML/BLUP. REMLBLUP REML/BLUP . REML BLUP (REML/BLUP) verossimilhança precisão Portanto (REML/BLUP

Resumo O objetivo deste trabalho foi comparar o uso de a priori não informativas e informativas em modelos bayesianos, bem como avaliar a viabilidade da inclusão de a priori informativas na estimativa dos componentes de variância e dos valores genotípicos em programas de melhoramento de soja. Os dados fenotípicos utilizados referem-se à avaliação de 80 genótipos de soja, em dez ambientes, ao longo de três anos. Para cada safra avaliada, foram utilizadas a priori informativas e não informativas, e os parâmetros foram estimados com uso do algoritmo de amostragem de Gibbs. As estimativas dos parâmetros da safra anterior foram utilizadas como informação prévia para a próxima safra avaliada. A qualidade do ajuste foi calculada com uso do critério de informação de desvio (DIC). A acurácia seletiva apresentou maiores valores nos modelos escolhidos por meio do DIC, para ambas as safras. No entanto, os intervalos de maior densidade a posteriori são menores para todos os modelos que adotaram a priori informativas. Adicionar informações à inferência bayesiana nem sempre resulta em melhor ajuste ao modelo. bayesianos soja referemse referem se 8 ambientes anos avaliada Gibbs DIC. DIC . (DIC) safras entanto modelo (DIC

Abstract The objective of this work was to compare the use of noninformative and informative priors in Bayesian models, as well as to evaluate the viability of including informative priors in the estimation of variance components and genetic values in soybean breeding programs. The used phenotypic data refer to the evaluation of 80 soybean genotypes in ten environments over three years. For each evaluated crop year, informative and noninformative priors were used, and the parameters were estimated using the Gibbs sampler algorithm. Parameter estimates from the previous crop year were used as prior information for the next evaluated crop year. The goodness-of-fit was calculated using the deviance information criterion (DIC). Selective accuracy showed the highest values for the models chosen through DIC for both crop years. However, the intervals of the highest posterior density are narrower for all models that adopted informative priors. Adding information into Bayesian inference does not always result in a better model fitting. programs 8 years algorithm goodnessoffit goodness fit DIC. . (DIC) However fitting (DIC

Abstract Species of the genus Cynodon are among the most cultivated forage crops in the world due to their high yield and nutritional quality, and its use in cattle feeding has been associated with gains in animal weight and increased milk production. The objective of this study was to model covariance structures in Cynodon spp. clones and study the changes in ranking of the selected genotypes, since it is believed that affects the ranking of genotypes. A total of 202 genotypes were evaluated in an experiment conducted in an augmented block design with four replications and four harvests. The genotypes were assessed for plant height, green weight, percentage of dry matter, and plant vigor. Nineteen repeated measures models with different covariance structures were tested. The best-fitted model adopts the CORH covariance structure for the genetic effects. Correct modeling of the covariance structure affected the ranking of genotypes in all variables evaluated. quality production spp 20 harvests height matter vigor tested bestfitted best fitted effects 2

ABSTRACT. Multi-trait multi-environment (MTME) models were fitted to eucalyptus breeding trials data to assess residual variance structure, genetic stability and adaptability. To do so, 215 eucalyptus clones were evaluated in a randomized complete block design with 30 replicates and one plant per plot in four environments. At 36 months of age, tree diameter at breast height (DBH) and pilodyn penetration (PP) were measured. Two MTME models were fitted, for which residuals were considered homoscedastic and heteroscedastic, with the best MTME model selected using Bayesian information criterion. The harmonic mean of the relative performance of the genotypic values (HMRPGV) was used to determine stability and adaptability. Of the two models, the heteroscedastic MTME model had better fit and provided greater accuracy. In addition, genotype-by-environment interaction was complex, and there was low genetic correlation between DBH and PP. Rank correlation between the clones selected by the MTME models was high for DBH but low for PP. The HMRPGV facilitated clone selection through simultaneous evaluation of stability, adaptability, and productivity. Thus, our results suggest that heteroscedastic MTME model / HMRPGV can be efficiently applied in the genetic evaluation and selection of eucalyptus clones. ABSTRACT Multitrait Multi trait multienvironment multi environment (MTME structure adaptability so 21 3 environments age (DBH PP (PP measured criterion (HMRPGV accuracy addition genotypebyenvironment genotype complex productivity Thus 2

Abstract The objective of this work was to estimate the genetic parameters and to evaluate the genotypic diversity of 12 'Tahiti' acid lime (Citrus latifolia) genotypes grafted onto two rootstocks. The experiment was carried out from July 2017 to January 2019, in the municipality of São Mateus, in the state of Espírito Santo, Brazil. Vegetative (stem diameter, canopy projection diameter, and plant height), productive (yield and fruit number), and fruit quality (fruit diameter, soluble solids content, and juice yield) traits were determined. A mixed model was used to estimate heritability and repeatability coefficients, as well as to predict clonal values. Scion diversity was determined through the standardized mean difference of Euclidean distances, and genotypes were clustered by modified Tocher. Clustering quality and trait importance were evaluated using the principal component analysis (PCA). Genotypic variance was observed, which is indicative of the possibility of selection of superior genotypes. The Tocher method showed the presence of three clusters, which is in alignment with the PCA results. The multivariate analyses allows of the selection and the recommendation of superior 'Tahiti' acid lime genotypes. 1 Tahiti 'Tahiti Citrus latifolia rootstocks 201 2019 Mateus Santo Brazil stem diameter height, height , height) yield number, number number) content coefficients values distances PCA. . (PCA) observed clusters results 20 (PCA 2

Resumo O objetivo deste trabalho foi estimar os parâmetros genéticos e avaliar a diversidade genética de 12 genótipos de lima ácida 'Tahiti' (Citrus latifolia) enxertados em dois porta-enxertos. O experimento foi conduzido de julho de 2017 a janeiro de 2019, no município de São Mateus, no estado de Espírito Santo, Brasil. Foram mensuradas características vegetativas (diâmetro de caule, diâmetro de projeção de copa e altura de planta), produtivas (rendimento e número de frutos) e de qualidade de frutos (diâmetros de fruto, teor de sólidos solúveis e rendimento de suco). Utilizou-se modelo misto para estimar os coeficientes de herdabilidade e repetibilidade, bem como predizer os valores genéticos. A diversidade entre os enxertos foi obtida por meio da diferença da distância euclidiana média padronizada, e os genótipos foram agrupados pelo método de Tocher modificado. A qualidade do agrupamento e a importância dos caracteres foi avaliada pela análise de componentes principais (ACP). Observou-se variabilidade genética, o que indica a possibilidade de seleção de genótipos superiores. O método de Tocher mostrou a presença de três grupos de genótipos, o que foi congruente com os resultados da ACP. O uso de técnicas multivariadas permite a seleção e a recomendação de genótipos superiores de lima ácida 'Tahiti'. 1 Tahiti 'Tahiti Citrus latifolia portaenxertos. portaenxertos porta enxertos. porta-enxertos 201 2019 Mateus Santo Brasil caule planta, planta , planta) diâmetros fruto suco. suco . suco) Utilizouse Utilizou se repetibilidade padronizada modificado ACP (ACP) Observouse Observou Tahiti. 20 (ACP 2

Abstract The selection of parents to originate promising base populations, as well as the knowledge of the gene effects controlling agronomic traits by means of diallel, are useful to drive genetic gains in Brazilian tropical wheat breeding programs. The goals of this study were to select tropical wheat parents with a high frequency of favorable alleles and segregating populations with high potential to originate superior progenies through partial diallel analysis. Thus, 14 parents were divided in two groups and crossed in a 7 × 7 partial diallel scheme to originate 49 F1 combinations. After obtaining F2 generation, the populations and the parents were evaluated in the field in the summer of 2021. Days for heading, plant height, rust and yellow spot resistance, and grain yield were evaluated. The data were subjected to partial diallel analysis. There were significant effects of general combining ability for all traits. The specific combining ability effect was significant for days for heading and plant height. The additive gene effects were predominant over the non-additive ones. The parents with the highest frequency of favorable alleles for the traits evaluated were selected in each group. Four populations with high genetic potential to originate superior progenies were selected. programs analysis Thus 1 4 F combinations generation 2021 height resistance nonadditive non ones group 202 20 2

RESUMO: Compreender a diversidade genética e contornar os problemas causados pela interação genótipos por ambientes é uma etapa importante em programas de melhoramento. Este estudo teve como objetivo estimar a diversidade genética e aplicar a metodologia de biplot genótipo + genótipo por ambiente (GGE biplot) em doze genótipos de algodão avaliados quanto ao rendimento da fibra, comprimento da fibra, resistência da fibra e micronaire. A estimativa dos componentes de variância e dos parâmetros genéticos foi feita através do método da máxima verossimilhança restrita e a predição dos valores genotípicos por meio da melhor predição linear não enviesada. Os métodos de Tocher modificado e análise de componentes principais (PCA) foram utilizados para quantificar a diversidade genética entre os genótipos. O método GGE biplot foi conduzido para encontrar os melhores genótipos em relação à adaptabilidade e estabilidade. As técnicas de Tocher e PCA permitiram a formação de clusters de genótipos semelhantes com base em uma estrutura multivariada. O GGE biplot indicou que os genótipos IMACV 690 e IMA08 WS foram altamente adaptáveis e estáveis para as principais características do algodão. O cruzamento dentre os genótipos IMACV 690 e IMA08 WS é o mais recomendado para aumentar o desempenho das principais características na cultura do algodão.

ABSTRACT: Understanding the genetic diversity and overcoming genotype-by-environment interaction issues is an essential step in breeding programs that aims to improve the performance of desirable traits. This study estimated genetic diversity and applied genotype + genotype-by-environment (GGE) biplot analyses in cotton genotypes. Twelve genotypes were evaluated for fiber yield, fiber length, fiber strength, and micronaire. Estimation of variance components and genetic parameters was made through restricted maximum likelihood and the prediction of genotypic values was made through best linear unbiased prediction. The modified Tocher and principal component analysis (PCA) methods, were used to quantify genetic diversity among genotypes. GGE biplot was performed to find the best genotypes regarding adaptability and stability. The Tocher technique and PCA allowed for the formation of clusters of similar genotypes based on a multivariate framework. The GGE biplot indicated that the genotypes IMACV 690 and IMA08 WS were highly adaptable and stable for the main traits in cotton. The cross between the genotype IMACV 690 and IMA08 WS is the most recommended to increase the performance of the main traits in cotton crops.

RESUMO: Embora a produtividade seja uma característica fundamental em programas de melhoramento da lima ácida Tahiti, outras características se destacam por proporcionar uma seleção mais eficiente ou mesmo influenciar na expressão de atributos produtivos. A aplicação de inferência Bayesiana, pode tornar o processo de identificação de indivíduos superiores e o estudo das correlações entre as características ainda mais acurado. Objetivou-se, por meio deste estudo, estimar valores genéticos em genótipos de lima ácida Tahiti através de inferência Bayesiana e estimar coeficientes de correlação e de trilha entre características vegetativas, produtivas e de qualidade de frutos. Vinte e quatro genótipos de lima ácida foram avaliados durante dois anos para peso e número de frutos, volume de copa, diâmetro de caule, teor de sólidos solúveis dos frutos, espessura de casca e rendimento de suco. Os valores genéticos foram estimados por meio de inferência Bayesiana e modelos com diferentes estruturas residuais foram testados via critério de informação de deviance. Coeficiente de correlação de Pearson e de análise de trilha foram determinados, removendo o efeito de multicolinearidade. A estimação de valores genéticos via inferência Bayesiana apresentou alta acurácia seletiva. As correlações obtidas entre caracteres de diferentes grupos podem ser úteis em estratégias de seleção para melhoramento da lima ácida Tahiti. A inferência Bayesiana demonstrou ser uma ferramenta importante e deve ser considerada em programas de melhoramento de culturas perenes.

ABSTRACT: Although the fruit yield has a core importance in Tahiti acid lime breeding programs, other traits stand out among the quality fruit and vegetative traits as ones that still need to be improved in selection of superior genotypes. Appling efficient tools aiming selection, such as the Bayesian inference, becomes an alternative in perennial crops. This study applied Bayesian inference in the genetic evaluation of Tahiti acid lime genotypes and estimated the interrelation between vegetative, productive and fruit quality traits. Twenty-four acid lime genotypes were evaluated for number of fruits, fruit yield, canopy volume, stem diameter, soluble solids content, shell thickness, and juice yield traits. The genotypic values were estimated through Bayesian inference and models with different residual structure were tested via deviance information criterion. Pearson’s correlation and the path analysis were estimated, removing the multicollinearity effect. The Bayesian inference estimates genotypic values with high selective accuracy. The correlations obtained between traits from different groups can be useful in selection strategies for improvement of Tahiti acid lime. The Bayesian inference demonstrated to be an important tool and should be considered in perennial breeding programs.

Resumo O objetivo deste trabalho foi avaliar a variabilidade genética e as associações de características produtivas do feijão-bóer, para indicação dessa cultura ao programa de melhoramento em Moçambique. Foram avaliadas 11 características do feijão-bóer, em delineamento de três blocos ao acaso, nos ambientes de Namapa (I) e Montepuez (II), em 2017/2018. Para avaliação das características, utilizaram-se análises de variância, parâmetros genéticos, correlações, rede de correlação e análise de trilha. Em ambos os ambientes, há alta variabilidade genética e fenotípica para ramos primários, ramos secundários, vagens por planta, número de sementes por vagem, largura e comprimento da vagem e produtividade, bem como alta herdabilidade para todas as características, exceto para altura da planta. Os ramos primários e secundários apresentam alta correlação com a produtividade e efeito direto positivo sobre ela. No entanto, altura de planta e vagens por planta apresentam alta variabilidade fenotípica e correlação positiva com a produtividade no ambiente I. Vagens por planta, peso de 100 sementes e ramos primários apresentam altos efeitos positivos diretos no ambiente I, e ramos secundários e número de sementes por vagem, no ambiente II. Os ramos primários e secundários apresentam alta variabilidade e associações com a produtividade em ambos os ambientes e são indicados para o programa de melhoramento do feijão-bóer em Moçambique.

Abstract The objective of this work was to evaluate the genetic variability and associations of yield traits of pigeon pea, for indication of this crop for the breeding program in Mozambique. Eleven pigeon pea traits were evaluated in a experimental design with three randomized complete blocks, in the environments of Namapa (I) and Montepuez (II), in 2017/2018. To evaluate the traits, analyses of variance, genetic parameters, correlations, correlation network, and path analysis were used. In both environments, there is a high genetic and phenotypic variability for primary branches, secondary branches, pods per plant, number of seed per pod, pod width, pod length, and yield, as well as a high heritability for all traits except for plant height. The primary and secondary branches have a high correlation with yield and a positive direct effect on it. However, plant height and pods per plant show a high phenotypic variability and a positive correlation with yield in environment I. Pods per plant, weight of 100 seed, and primary branches show high direct positive effects in environment I, and secondary branches and number of seed per pod, in environment II. The primary and secondary branches show high variability and associations with yield in both environments and are indicated for the pigeon pea breeding program in Mozambique.

ABSTRACT Forest plantations are strong allies in preserving natural resources, providing social and economic benefits. The plantations carried out in the coming years will be vital to meet the growing demand for forest products. To ensure the continuity of genetic progress and the good results achieved with the improvement of forest species, statistical methods that accurately selects superior genotypes are desirable. Multi-trait multi-environment trials are preferred over single-trait single-environment trials, since they can exploit the covariance between traits and environments, increasing the analysis’s prediction power. The Bayesian multi-trait multi-environments approach (BMTME) combines the cited advantages with the parsimony of Bayesian statistics promoting a more informative data analysis. Thus, the aims of this study were to estimate genetic parameters, evaluate genetic variability, and select eucalyptus clones through BMTME models. To this end, a data set with 215 eucalyptus clones evaluated in four environments for diameter at breast height and Pilodyn penetration was used. The Markov Chain Monte Carlo algorithm was applied to estimate the variance components and genetic parameters and to predict the genotypic values. The Smith-Hazel index was used to simultaneously achieve gains with selection for both traits. The BMTME approach provided high accuracies, being a good strategy to the evaluation of multiple environmental trials of Eucalyptus for breeding purposes.

ABSTRACT An accurate and efficient statistical method for genetic evaluation is a key requirement for progress in any breeding program. Thus, the present study aimed to evaluate the performance of Frequentist and Bayesian inferences for repeated measures analysis in Jatropha curcas breeding. To this end, 730 individuals from 73 half-sib families were evaluated for grain yield trait, over six crop years. Frequentist and Bayesian analyses were made considering repeatability models with different residual variance structures. Variance components were estimated through restricted maximum likelihood (REML) and Markov Chain Monte Carlo (MCMC). Genetic values were predicted through best linear unbiased prediction (BLUP) and estimated through MCMC. Variance components and genetic and non-genetic parameters estimated by the Frequentist inference presented values similar to those estimated by the Bayesian inference. The selective accuracy presented high magnitude (0.84) by the Frequentist and Bayesian inferences, indicating high reliability. Confidence and highest posterior density (HPD) intervals were similar for the genetic parameters, however the HPD intervals range was slightly short. This study highlighted the importance of testing the residual variance structure and pointed out that the Frequentist and Bayesian inferences presented similar results when using non-informative prior. Then, both inferences can be efficiently applied in Jatropha curcas breeding.

ABSTRACT. In cotton crops, the cotton seed yield significantly contributes with the success of any cultivar. However, other traits are considered when an ideotype is pointed out in the selection, such as the fiber quality traits. The aim of this study was to applied genotype by yield*trait (GYT) biplot to a multi-environment trial data of cotton genotypes and selected the best genotypes. For this end, thirteen genotypes from nineteen trials were assessed. Seven traits were evaluated [cotton seed yield (SY), fiber percentage (FP), fiber length (FL), fiber uniformity (FU), short fiber index (SFI), fiber strength (FS), and elongation (EL)] and residual error variances structures [identity variance (IDV) and diagonal (Diag)] were tested by bayesian information criterion. After, the REML/BLUP approach was applied to predict the genetic values of each trait and the selective accuracy were measured from the prediction. Then, the GYT-biplot were applied to the data. For SP and SFI traits, the model with Diag residual variance was indicated, whereas for SY FL, FU, FS, and EL traits the model with IDV residual variance demonstrated the best fit to the data. Values of accuracy were higher than 0.9 for all traits analyzed. In the GYT-biplot acute angles were find for all traits relations, which means high correlation between the yield*traits combination. Besides that, the correlation still can be seen in the GYT-biplot, as shown by the magnitudes of the angles between the pairs Yield*FU-Yield*FS and Yield*FS-Yield*EL. Also, the GYT-biplot indicates the genotype G4 with the best performance for Yield*FS, Yield*SFI, Yield*FU, Yield*FL, and Yield*FP combined. The genotypes G4, G1, G13, G8, and G9 represent those genotypes with yield advantage over the other cultivars. Then, the genotype G4 combines all desirable characteristics and demonstrate have large potential in the cotton breeding. The GYT approach were valuable and were highly recommended in cotton breeding programs for selection purpose in a multivariate scenario.

Abstract Multiple-trait best linear unbiased prediction (BLUP) is generally the most appropriate method to predict genetic values because it considers the genetic and residual correlations among traits and leads to higher selective accuracy. Thus, the aim of the present study was to analyze the interrelationships among traits related to cotton fiber length through path analysis under multiple-trait BLUP. To that end, 36 elite lines were evaluated in three envi ronments and phenotyped for fiber quality and agronomic traits. Variance components were estimated via residual maximum likelihood (REML). The genetic correlation coefficients among traits were obtained through the mixed model output, and a correlation network was constructed to graphically express these results. Subsequently, path analysis was performed considering fiber length as the main dependent variable. Genetic parameters indicate that the phenotypic variance for most traits is mainly composed of residual effects, which reinforces the need for more accurate statistical methods, such as multiple-trait BLUP. The results for genetic correlations and path analysis reveal the difficulty of selection based on important fiber quality traits, especially fiber length, since most traits show a low cause-and-effect relationship, while other important traits have an undesirable cause-and-effect relationship. Path analysis under multiple-trait BLUP proved to be suitable and useful for studying interrelationships among traits related to cotton fiber length.

Resumen La mejor predicción lineal insesgada de rasgos múltiples (BLUP) es, en general, el método más apropiado para predecir valores genéticos porque considera las correlaciones genéticas y residuales entre rasgos y conducta con mayor precisión selectiva. Por lo tanto, el presente estudio tuvo como objetivo estudiar las interrelaciones entre los rasgos relacio nados con la longitud de la fibra de algodón a través del análisis de ruta en BLUP de rasgos múltiples. Con este fin, se evaluaron treinta y seis líneas élite en tres ambientes y se fenotipificaron para muchos rasgos relacionados con la calidad de la fibra y los rasgos agronómicos. Los componentes de la varianza se estimaron mediante la máxima verosimilitud residual (REML). Los coeficientes de correlación genética entre rasgos se obtuvieron a través de la salida del modelo mixto, y para expresar gráficamente estos resultados se construyó una red de correlación. Posteriormente, realizamos el análisis de ruta considerando la longitud de la fibra como variable dependiente principal. Los parámetros genéticos indican que la variación fenotípica para la mayoría de los rasgos se compone principalmente de efectos residuales, lo que refuerza la necesidad de utilizar métodos estadísticos más precisos, como BLUP de rasgos múltiples. Los resultados encontrados para las correlaciones genéticas y el análisis de ruta revelan la dificultad de la selección basada en rasgos importantes de la calidad de la fibra, especialmente la longitud de la fibra, ya que la mayoría de los rasgos muestran una relación de causa y efecto muy baja, y otros rasgos importantes presentan una relación de causa y efecto no deseada. El análisis de ruta en BLUP de rasgos múltiples resultó ser adecuado y útil para el estudio de las interrelaciones entre los rasgos relacio nados con la longitud de la fibra de algodón.