RESUMO As doenças foliares da soja afetam o índice de área foliar (IAF) e a estrutura principal para a fotossíntese e a produtividade. O objetivo deste estudo foi propor uma nova metodologia para determinar o início das aplicações de fungicidas, com base no IAF, na taxa de aplicação e na inclusão de um fungicida multissítio, para controlar a ferrugem asiática da soja (FAS). O estudo foi implementado no delineamento de blocos casualizados e em dois locais, com quatro repetições em um esquema fatorial triplo mais um tratamento adicional (4 × 2 × 2 + 1), sendo 4 IAF da soja (0,9, 1,8, 3,6 e 6,1) indicadas para iniciar as aplicações de fungicida; dois volumes de pulverização (70 e 120 L ha-1); com ou sem fungicida multissítio (mancozeb), e tratamento sem fungicidas. A deposição de calda sobre as plantas não diferiu entre os manejos estudados para o IAF de 1,8 e 3,6. Os tratamentos incluindo fungicida multissítio em IAF de soja entre 3,6 e 6,1, em ambos os volumes, apresentaram resultados de controle superior. Os maiores rendimentos foram observados quando a aplicação de fungicida começou em 3,6 de IAF para os dois volumes. A melhor relação entre controle de doenças e produtividade ocorreu quando as aplicações começaram em 3,6 de IAF com 70 L ha-1 e fungicida multissítio.

ABSTRACT Soybean foliar diseases negatively affect leaf area index (LAI) and compromise the main structure for photosynthesis and grain yield. The objective of this study was to propose a new methodology to determine the commencement of fungicide application based on the soybean LAI, spray volumes, and the inclusion of a multisite fungicide to control Asian soybean rust (ASR). The study was implemented in a randomized block design at two locations, with four replicates in a factorial scheme plus one additional treatment (4 × 2 × 2 + 1) - four soybean LAI (0.9, 1.8, 3.6, and 6.1) indicating the initiation stages of fungicide applications, two spray volumes (70 and 120 L ha-1), with or without multisite fungicide (mancozeb), and a control treatment without fungicide. The spray deposition on plants did not differ between the treatments for 1.8 and 3.6 LAI. Treatments including the multisite fungicide for LAI between 3.6 and 6.1 for both spray volumes presented superior ASR control results. The highest soybean yields were observed when fungicide application started at 3.6 LAI for both spray volumes. The best correlation between disease control and grain yield occurred when the applications started at 3.6 LAI with 70 L ha-1 spray volume and the multisite fungicide.

RESUMO O objetivo deste estudo foi avaliar o resíduo de dicamba após a limpeza de pulverizadores com tanques de diferentes materiais (fibra de vidro e polietileno), e os efeitos desse resíduo na sintomatologia de soja não-tolerante ao dicamba. O experimento consistiu na pulverização de água coletada nos enxágues durante a limpeza dos pulverizadores em soja não-resistente ao dicamba no estádio V3. Depois que a solução com dicamba foi misturada no tanque do pulverizador e pulverizada, quatro enxágues foram feitos e, para cada enxágue, uma amostra foi coletada. As análises do resíduo de dicamba nos enxágues foram realizadas em delineamento inteiramente casualizado, com três repetições no esquema fatorial 2 × 4, correspondendo a dois tipos de material do tanque (fibra de vidro e polietileno) e quatro enxágues, utilizando Cromatografia Líquida de Alta Eficiência (CLAE). A avaliação do risco potencial de injúria em soja por resíduo de dicamba foi realizada em um delineamento em blocos casualizados, com quatro repetições, no esquema fatorial 2 × 4 + 1, correspondendo a dois tipos de material do tanque (fibra de vidro e polietileno), quatro enxágues e controle (sem aplicação). O dicamba foi removido efetivamente com a realização de pelo menos três enxágues, independentemente do material do tanque. O pulverizador com tanque de fibra de vidro reteve mais resíduos no primeiro enxágue, mas foi similar ao pulverizador com tanque de polietileno nos enxágues seguintes. A altura das plantas foi reduzida pela aplicação do primeiro enxágue, independentemente do material do tanque, enquanto a estimativa visual de injúria e a redução da produtividade foram observadas pela aplicação do primeiro e segundo enxágues.

ABSTRACT This study aimed to evaluate the dicamba residue after cleanout procedures in sprayers with different tank materials (fiberglass and polyethylene) and its effects on the symptomology of non-dicamba tolerant (DT) soybean. The experiment consisted of spraying rinsates collected during a cleanout of boom sprayers on non-DT soybean at the V3 stage. Once the dicamba solution was mixed in the sprayer tank and sprayed, four rinses were made, and for each rinse, a sample was collected. The dicamba residue analyses in each rinse solution were conducted in a completely randomized design with three replicates in a 2 × 4 factorial scheme, corresponding to two sprayer tank materials (fiberglass and polyethylene) and four rinses, using High-Performance Liquid Chromatograph (HPLC). The evaluation of the potential risk of injury on non-DT soybean caused by dicamba residue was conducted in a randomized block design with four replicates and a 2 × 4 + 1 factorial scheme, corresponding to two types of sprayer tank material (fiberglass and polyethylene), four rinses, and control (without application). The dicamba was effectively removed using at least three rinses regardless of spray tank material. Fiberglass tank sprayer retained more residue in the first rinsate, but similar to polyethylene tank sprayer in the following rinses. Plant height was reduced by spraying rinsates collected from the first rinse regardless of tank material. In contrast, visual estimation of injury and reduced yield were observed due to the rinsate application collected from the first and second rinses.

ABSTRACT For the successful application of phytosanitary products, it is essential to understand the spraying process well. The present work aims to evaluate the spectrum and speed of the droplets produced by different spray nozzle models with air induction, working under different operating conditions. The experiment was conducted using an entirely randomized design with five repetitions in a 3 × 3 × 3 factor scheme that incorporates three nozzle models (ADIA, AIXR, and GA), three nominal flows (0.76, 1.14, and 1.51 L min−1), and three operating pressures (200, 300, and 400 kPa). The spectrum and speed of the droplets were determined directly using a real-time droplet analyzer based on high-resolution image analysis. The spray nozzle model interfered with the results. The ADIA promoted Dv0.5 (VMD) higher than AIXR and GA, reaching differences of up to 90%. The increase in pressure promoted a reduction in the droplet size; however, there was no well-defined behavior for the relationship between the flow rate and droplet size. The ADIA and AIXR gave rise to greater uniformity of the droplets in most of the evaluated conditions. The increase in pressure promoted an increase in the speed of the droplets. However, the effect of the nozzle model on this parameter was dependent on the flow.

ABSTRACT It is a well-known fact that the application of pesticides can be improved using an electrostatic spray due to the reduction of the application rate and increase in deposition on plant targets. However, little information exists on the use of such technology in maize crops. Thus, this study is aimed to evaluate the spray deposition on maize resulting from spray application using an electrostatic sprayer in combination with low application rates and different spray compositions. A field experiment was conducted in a randomized block having a 2×2×2 factorial design with two application rates (95 and 52 L ha-1), with or without the spray electrification, and with or without the synthetic adjuvant. The droplet electrification ability, interference of the electrical conductivity of the spray solution, losses of spray solution to the soil, and spray deposition on maize plants were evaluated for two cases of insecticide applications. The Faraday cage method was used to determine the spray electrification ability of the equipment. The spray deposition on plants and the losses to the soil were analyzed using a tracer (food coloring dye) added to the spray solution that was subsequently detected by spectrophotometry. It was seen that the electrostatic sprayer improved the spray application efficiency, which responded positively to the increase in the electrical conductivity of the spray solution. The deposition of the electrified spray solution on the upper third canopy of maize was found to be higher; the spray solution electrification also reduced the losses to the soil, regardless of the application rate.

ABSTRACT Electrostatic spray can bring benefits to the pesticide application such as the reduction of application rate and the increase of deposits on targets. Therefore, this study aimed to evaluate the effect of electrostatic spraying using lower application rates and different adjuvants on soybean spray deposition and chemical control of powdery mildew (Microsphaera diffusa Cooke & Peck). The field experiment was conducted in duplicate. A randomized complete block design with four replications in a 2 × 2 × 2 + 1 factorial scheme was used. The factors were two application rates, with and without droplet electrification, two spray solution compositions, and one additional treatment. Deposition on upper and lower leaves, spray loss to the soil, and powdery mildew control effectiveness were evaluated. The electrical conductivity of the spray solution and the charge/mass ratio induced in droplets were also evaluated. All treatments reduced the soybean powdery mildew severity. Electrostatic spraying responded positively to an increase in the electrical conductivity of the spray solution regarding the charge/mass ratio, but it did not increase spray deposition on the lower third of the canopy and did not influence spray loss to the soil, which was higher as the application rate increased.

ABSTRACT Adjuvants are tools to maximize pesticide spray quality. This study aimed to evaluate the interaction effects between adjuvants and the fungicide azoxystrobin + benzovindiflupyr on the physicochemical characteristics, droplet evaporation time, and spray droplet size. The experiment was carried out using a 2×6 factorial scheme, in which the first factor was the absence or presence of the fungicide mixture (water or water + fungicide) and the second factor was the presence of different adjuvants (water and five adjuvants). The parameters evaluated were surface tension, pH, viscosity, electrical conductivity, droplet evaporation time, volume median diameter, percentage of droplets smaller than 100 μm, and relative amplitude of the droplet spectrum. The silicone and propionic acid + soy lecithin adjuvants reduced the pH of the spray solution, and the sodium lauryl ether sulfate, propionic acid + soy lecithin, and orange essential oil adjuvants reduced droplet evaporation when mixed with the fungicide. All tested adjuvants improved spray quality related to the characteristics of the droplet spectrum, reducing the percentage of droplets smaller than 100 μm, and allowing more uniform droplet size. The fungicide azoxystrobin + benzovindiflupyr affected droplet evaporation time.

O objetivo deste trabalho foi avaliar a deposição de calda pulverizada na cultura da batata e o espectro de gotas promovidos pela aplicação aérea e terrestre. O experimento foi repetido em duas épocas, em lavouras comerciais de batata, no delineamento inteiramente casualizado, em esquema fatorial 6 x 2, sendo seis formas de aplicação (aérea, a 15 e 30 L ha-1 com atomizador rotativo, e terrestre, a 200 e 400 L ha-1, com pontas de jato plano duplo, com indução de ar e jato cônico vazio); e duas composições de calda (água e água mais o adjuvante fosfatidilcoline + ácido propiônico). Avaliaram-se deposição de calda no dossel da cultura, perdas para o solo e deriva, pela técnica da adição de traçador para quantificação por espectrofotometria, e espectro de gotas, por meio da análise de papéis hidrossensíveis. A adição do adjuvante, de forma geral, proporcionou maior retenção de calda nas folhas inferiores e superiores. A diminuição do volume de aplicação proporcionou boa deposição de calda no alvo, sendo uma alternativa para aumento da capacidade operacional. A aplicação aérea mostrou-se tão eficiente quanto as aplicações terrestres na deposição de calda no alvo. A utilização do adjuvante não interferiu no diâmetro da mediana volumétrica e na percentagem do volume de gotas pulverizadas menores que 100 μm.

The aim of this study was to evaluate the sprayed liquid deposition in potato crop and the droplet spectrum, promoted by aerial and ground applications. The experiment was conducted in duplicate, in commercial potato crops, in completely randomized design, in a factorial model 6 x 2: six application methods (aerial, with rotative atomizer at 15 and 30 L ha-1, and ground, at 200 and 400 L ha-1 with air induction twin flat-fan and hollow-cone nozzles) and with two spray liquid compositions (water and water plus phosphatydilcoline + propionic acid adjuvant). It was evaluated spray liquid deposition in the crop canopy, run-off and drift, by addition of a tracer for quantification by spectrophotometry technique and the droplet spectrum by image analysis of water-sensitive papers. In general, the adjuvant addition provided a better spray liquid retention into lower and upper leaves. The decrease of spray volume provided a good spray liquid deposition on target that was contribute for an increase of the operational capacity. The aerial application was as efficient as the ground applications on the spray liquid deposition on the target. The use of adjuvant did not modify the volume median diameter and the percentage of spray volume in droplets smaller than 100 µm diameter.