Neste artigo foi estudado o efeito da densidade de corrente e da temperatura na produção de dióxido de manganês eletrolítico (DME) a partir de soluções ácidas de sulfato de manganês por meio de voltametria de varredura linear, microscopia eletrônica de varredura e medidas de área superficial (BET). Foi observado que na temperatura de 65º C a produção de DME foi limitada pelo fenômeno de passivação dos anodos de titânio e que, a 90º C este efeito era substancialmente reduzido. Foi também verificado que o aumento da densidade de corrente e a diminuição da temperatura proporcionaram um aumento significativo na área superficial específica do depósito de DME. A maior área superficial, de 168 m²/g, foi obtida com uma densidade de corrente de 8mA/cm², em solução 0,34M de H2SO4 a 65ºC, enquanto que a menor, de 52 m²/g, foi obtida com uma densidade de corrente de 4mA/cm², na mesma solução, a 90ºC.
In this paper the effect of current density and temperature on the production of electrolytic manganese dioxide (EMD) from acidic manganese sulfate solutions was studied by linear sweep voltammetry, scanning electron microscopy and surface area measurements (BET). At 65ºC, it was observed that the EMD production was limited by the passivation of the titanium anodes, but at 90ºC this effect was substantially reduced. It was also verified that the increase of current density and the decrease of temperature lead to a considerable increase of the specific surface area of the EMD deposit. The higher surface area, 168m²/g, was obtained with a current density of 8mA/cm², in a 0.34M H2SO4 solution, at 65ºC, while the smaller, 52m²/g, was obtained with a current density of 4mA/cm², in the same solution, at 90ºC.