Abstract Evaluate the shaping ability and preparation time using a pediatric motor-driven rotary instrumentation compared to other systems in resin prototypes of primary molars. Methods: Thirty specimens were scanned in micro-CT and divided into three groups according to the instrumentation type: pediatric motor-driven Sequence baby File (SBF); conventional motor-driven (Sequence Rotary File - SRF); manual K file. Instrumentation time was timed. After preparation, the specimens were scanned again. The pre- and post-instrumentation images were superimposed to measure the amount of root canal deviation and the resin remnant thickness. ANOVA followed by the Tukey test analyzed the comparisons between groups (p<0.05). Results: No statistically significant differences occurred in root canal deviation among groups (p>0.05). There were statistically significant differences in the comparison among root thirds (p<0.001) but without significant differences in the interaction group vs. root third (p>0.05). Both motor-driven instrumentations showed statistically greater weariness than manual instrumentation (p<0.001), without significant significant differences between SBF and SRF. Motor-driven instrumentation had a shorter working time than manual instrumentation (p<0.001). Conclusion: Pediatric motor-driven instrumentation demonstrated good outcomes in relation to root canal deviation and amount of remnant structure, with shorter instrumentation time. SBF can be a suitable alternative for endodontic instrumentation in primary molars. motordriven motor driven molars Methods microCT micro CT type (SBF) SRF SRF) file timed again pre postinstrumentation post thickness p<0.05. p005 p p<0.05 . 0 05 (p<0.05) Results p>0.05. p>0.05 (p>0.05) p<0.001 p0001 001 (p<0.001 vs p<0.001, , Motordriven Motor p<0.001. Conclusion structure (SBF p00 p<0.0 (p<0.05 p>0.0 (p>0.05 p<0.00 p000 00 (p<0.00 p0 p<0. (p<0.0 p>0. (p>0.0 p<0 (p<0. p>0 (p>0. p< (p<0 p> (p>0 (p< (p> (p

Resumo Objetivo: Avaliar os resultados da instrumentação endodôntica e o tempo de preparo de lima odontopediátrica ativada por motor (Sequence Baby File- SBF) em canais de molares decíduos prototipados. Métodos: Trinta espécimes foram escaneados em micro-CT e divididos em três grupos de acordo com o tipo de instrumentação: mecanizada odontopediátrica (SBF); mecanizada convencional; lima K manual. O tempo de instrumentação foi cronometrado. Após o preparo, os espécimes foram escaneados novamente. As imagens pré e pós-instrumentação foram sobrepostas e a quantidade de desvio do canal radicular e a espessura de resina remanescente foram mensurados. Para as análises de comparações entre os grupos foram realizados teste ANOVA seguido do teste de Tukey (p<0,05). Resultados: Não ocorreram diferenças estatisticamente significativas entre os grupos no desvio do canal radicular (p>0,05). Houve diferenças estatisticamente significativas na comparação entre terços radiculares (p<0,001), mas sem diferenças significativas na interação grupo vs. terço radicular (p>0,05). A instrumentação mecanizada apresentou desgaste estatisticamente maior do que a instrumentação manual (p<0,001), sem diferenças estatísticas entre a SBF e a lima mecanizada convencional. A instrumentação mecanizada teve menor tempo de trabalho quando comparado a instrumentação manual (p<0,001). Conclusão: A instrumentação mecanizada odontopediátrica demonstrou bons resultados em relação ao desvio do canal radicular e quantidade de estrutura remanescente, com menor tempo de instrumentação. A SBF pode ser uma alternativa adequada para a instrumentação endodôntica em molares decíduos. Objetivo Sequence File prototipados Métodos microCT micro CT (SBF) convencional cronometrado novamente pósinstrumentação pós mensurados p<0,05. p005 p p<0,05 . 0 05 (p<0,05) Resultados p>0,05. p>0,05 (p>0,05) p<0,001, p0001 p<0,001 , 001 (p<0,001) vs p<0,001. Conclusão (SBF p00 p<0,0 (p<0,05 p>0,0 (p>0,05 p000 p<0,00 00 (p<0,001 p0 p<0, (p<0,0 p>0, (p>0,0 (p<0,00 p<0 (p<0, p>0 (p>0, p< (p<0 p> (p>0 (p< (p> (p

Abstract This study aimed to evaluate the influence of temperature on torsional strength and angular deflection of two experimental NiTi rotary instruments manufactured from Blue and Gold thermal treatments and with identical cross-sections. A total of 40 experimental NiTi instruments 25.06 and with a triangular cross-section and manufactured from Blue and Gold thermal treatments were used (n=20). The torsional test was performed in the 3 mm from the tip of the instrument according to ISO 3630-1. The torsional test evaluated the torsional strength and angular deflection to failure at room temperature (21°C ± 1° C) and body temperature (36°C ±1°C). The fractured surface of each fragment was observed by using scanning electron microscopy (SEM). Data were analyzed using an unpaired t test for inter and intra-group comparison and the level of significance was set at 5%. The results showed that the body temperature did not affect the torsional strength and angular deflection of the instruments when compared with room temperature (P>0.05). However, at body temperature, the Blue NiTi instruments presented significantly lower angular deflection in comparison with Gold NiTi instruments (P<0.05). There was no significant difference regarding the torsional strength of the instruments at body temperature (P>0.05). The temperature did not affect the torsional strength of the instruments manufactured from Blue and Gold technology. However, the Blue NiTi instruments presented significantly lower angular deflection than Gold instruments at 36°C temperature. crosssections. crosssections cross sections. sections cross-sections 4 2506 25 06 25.0 crosssection section n=20. n20 n n=20 . 20 (n=20) 36301. 36301 3630 1. 1 3630-1 21°C 21C C 21 36C 36 ±1°C. 1C ±1°C ±1°C) SEM. SEM (SEM) intragroup intra group 5 5% P>0.05. P005 P P>0.05 0 05 (P>0.05) However P<0.05. P<0.05 (P<0.05) technology 250 2 25. n2 n=2 (n=20 363 3630- (SEM P00 P>0.0 (P>0.05 P<0.0 (P<0.05 n= (n=2 P0 P>0. (P>0.0 P<0. (P<0.0 (n= P>0 (P>0. P<0 (P<0. (n P> (P>0 P< (P<0 (P> (P< (P

Resumo O objetivo deste estudo foi avaliar a influência da temperatura nas propriedades de torção (resistência à torção e deflexão angular) de dois instrumentos rotatórios experimentais de NiTi fabricados com secção triangu.ar e tratamentos térmicos Blue e Gold. Quarenta instrumentos experimentais de NiTi 25.06 com tratamento térmico Blue e Gold foram usados (n= 20). Foi avaliada a resistência torcional e a deflexão angular até a fratura na temperatura ambiente (21°C ± 1°C) e corporal (36°C ± 1°C). O teste torcional foi realizado nos 3 mm da ponta dos instrumentos de acordo com a ISO 3630-1. A superfície fraturada de cada instrumento foi observada pelo microscópio eletrônico de varredura (MEV). Os dados foram analisados por meio do teste t não pareado para a comparação inter e intragrupos e o nível de significância à 5%. Os resultados demonstraram que a temperatura corporal não afetou a resistência a torção e deflexão angular quando comparada com a temperatura ambiente (P>0.05). No entanto, na temperatura de 36°C o instrumento com tratamento térmico Blue apresentou menor deflexão angular quando comparado com o Gold (P<0.05). Não houve diferença significante entre os dois instrumentos em relação a resistência à torção. A temperatura corporal não modificou a resistência torcional dos instrumentos fabricados com tecnologia Blue e Gold. No entanto, os instrumentos com NiTi Blue apresentaram menor deflexão angular do que o Gold a 36°C. trianguar triangu ar 2506 25 06 25.0 n= n (n 20. 20 . 20) 21°C 21C C 21 1°C 1C 1 36C 36 1°C. 36301. 36301 3630 1. 3630-1 MEV. MEV (MEV) 5 5% P>0.05. P005 P P>0.05 0 05 (P>0.05) entanto P<0.05. P<0.05 (P<0.05) 250 2 25. 363 3630- (MEV P00 P>0.0 (P>0.05 P<0.0 (P<0.05 P0 P>0. (P>0.0 P<0. (P<0.0 P>0 (P>0. P<0 (P<0. P> (P>0 P< (P<0 (P> (P< (P

Abstract Irrigation solutions might affect dentin surface characteristics and, consequently, endodontic sealers adhesion. Objective This study analyzed the effect of different final irrigation protocols on push-out bond strength (BS) of AH Plus to dentin seven days and 20 months after obturation. Scanning electron micrographs were obtained from the dentin surface of one sample/group after final irrigation. Methodology Canals of bovine incisors were instrumented and received final irrigation with (n=21): G1 – 2.5% sodium hypochlorite (NaOCl) + distilled water; G2 – 2.5% NaOCl + 17% EDTA; G3 – 2.5% NaOCl + 17% EDTA + 2.5% NaOCl; G4 – 2.5% NaOCl + 17% EDTA + 2% chlorhexidine (CHX); G5 – mixture 5% NaOCl + 18% etidronate (HEDP); and G6 – mixture 5% NaOCl + 10% tetrasodium EDTA (Na4EDTA). After irrigation, one root/group was split and images were obtained by scanning electron microscopy (SEM). The other 20 roots/group were filled with only AH Plus sealer. Three slices/root were used for push-out assessment seven days and 20 months after obturation. One-way analysis of variance and Tukey (α<0.05) were used to compare the results among experimental groups, and unpaired t-test (α<0.05) was used to compare the results of the same group over time. Results The photomicrographs showed that, excepting G1, all groups completely removed the smear layer from the samples. In G2 and G4, the opening of the dentin tubules enlarged. In G3, erosion was observed in the peritubular and intertubular dentin. Values of the BS in the seven days were G2=G3=G4=G5>G6=G1 and in the 20 months were G3=G5>G6=G4>G1=G2. G3, G5, and G6 presented values of BS in 20 months similar to the values of seven days (P>0.05). Conclusions The final irrigation protocols tested produced dentin surfaces with different characteristics. Only G3 and G5 presented high BS values that were stable over time. consequently adhesion pushout push out (BS 2 obturation samplegroup sample n=21 n21 n 21 (n=21) G 25 5 2.5 (NaOCl water 17 CHX (CHX) 18 HEDP (HEDP) 10 Na4EDTA. Na4EDTA NaEDTA . Na (Na4EDTA) rootgroup root SEM. SEM (SEM) rootsgroup roots sealer slicesroot slices Oneway One way α<0.05 α005 α 0 05 (α<0.05 ttest t test time samples enlarged G2G3G4G5G6G1 GGGGGG G2=G3=G4=G5>G6=G G3G5G6G4G1G2 G3=G5>G6=G4>G1=G2 P>0.05. P005 P P>0.05 (P>0.05) n=2 n2 (n=21 2. 1 (CHX (HEDP (Na4EDTA (SEM α<0.0 α00 (α<0.0 G2G3G4G5G6G G3G5G6G4G1G G3=G5>G6=G4>G1=G P00 P>0.0 (P>0.05 n= (n=2 α<0. α0 (α<0. P0 P>0. (P>0.0 (n= α<0 (α<0 P>0 (P>0. (n α< (α< P> (P>0 (α (P> (P

Abstract The aim of this study was to compare the quantification of hard-tissue debris by using micro-computed tomography (micro-CT) and nano-focus computed tomography (nano-CT) after root canal instrumentation. Ten mandibular molars containing an isthmus in the mesial root were scanned in a SkyScan 1172 micro-CT device with a voxel size of 12.8 µm and in a NanoTom nano-CT device with 5.5 µm. The mesial root canals were irrigated with 5 mL of saline solution at the orifice level, instrumented with Reciproc R25 files and a second scanning was performed by micro-CT and nano-CT devices for post-instrumentation images. DataViewer software was used for registering the pre- and post-operative micro-CT and nano-CT images. The root canal and the debris were segmented for quantitative analysis of the volume of the canal and volume of debris using CTAn software. Statistical analysis was performed using the T test for comparison between volume of the canal after instrumentation and volume of debris in both image modalities. The level of significance was set at p < 0.05. Nano-CT images showed higher values of debris when compared with micro-CT (p < 0.05) after root canal instrumentation. No difference was observed between the volume of the root canal after instrumentation in the two imaging methods used (p > 0.05). Nano-CT technology can be recommended as a more precise method for quantitative analysis of hard-tissue debris. Moreover, in Endodontic research it is a promising method, as it is capable of providing higher spatial and contrast resolution, faster scanning and higher image quality. hardtissue hard tissue microcomputed micro microCT CT (micro-CT nanofocus nano focus nanoCT (nano-CT 117 128 12 8 12. 55 5. R R2 postinstrumentation post pre postoperative operative modalities 005 0 05 0.05 NanoCT Nano . Moreover resolution quality 11 1 00 0.0 0.

Aim This study investigated the influence in vitro of different sodium hypochlorite (NaOCl) agitation protocols associated or not with DualRinse (HEDP) on the temperature of the solution. Methods Forty-eight premolars were instrumented and their apical third sealed to allow a closed irrigation system. The teeth remained immersed in a basin of warm water (37°C). The teeth were divided into the groups: G1 ( NaOCl+Passive Ultrasonic Irrigation (PUI)), G2 ( N a O C l / H E D P + P U I), G3 ( NaOCl + EasyClean (EC)) and G4 ( N a O C l / H E D P + E C). The canals were filled with the respective solutions and after 180 seconds the first temperature measurement was taken (T0). Then, the solutions were agitated, following the different protocols, for 60 seconds and a new measurement was performed (T60). The temperature was measured using a digital thermometer for type “K” sensors that was inserted into the middle third of the teeth. At the end of the measurements, the teeth were sectioned and prepared for scanning electron microscopy. The dentinal wall of middle third was graded according to the amount of debris and smear layer remaining on the walls. The results were analyzed using ANOVA test and Tukey’s multiple comparisons (p<0.05). Results G1 and G2 had an average increase in temperature of 1.1°C and 1.65°C, respectively (p>0.05). EasyClean caused a decrease in the temperature of the solutions in both groups, without a significant statistical difference with T0 (p>0.05). Regarding cleaning, it was only possible to observe clean dentinal tubules in the groups with the chelator. PUI discretely increased the temperature of the solution, regardless of the solution. The opposite effect was observed after activation with EasyClean. Conclusion The association of NaOCl with a chelating agent promoted the cleaning of the dentinal tubules. (NaOCl HEDP (HEDP solution Fortyeight Forty eight system 37°C. 37C 37°C . 37 (37°C) G NaOClPassive Passive PUI, , (PUI)) I, I I) EC (EC) C. C) 18 T0. T (T0) Then agitated 6 T60. T60 (T60) K “K measurements microscopy walls Tukeys Tukey s p<0.05. p005 p p<0.05 0 05 (p<0.05) 11C 1 165C 65 1.65°C p>0.05. p>0.05 (p>0.05) chelator 3 (37°C (PUI) (EC (T0 T6 (T60 p00 p<0.0 (p<0.05 p>0.0 (p>0.05 (PUI (T (T6 p0 p<0. (p<0.0 p>0. (p>0.0 p<0 (p<0. p>0 (p>0. p< (p<0 p> (p>0 (p< (p> (p

Resumo Objetivo: Investigar se o alargamento do foramen realizado durante o tratamento primário tem um efeito na quantidade de material obturador apicalmente extruído durante oretratamento e verificar a sensibilidade da tomografia computorizada de feixe cônico (TCFC) na detecção de material obturador extruído. Métodos: Quarenta raízes palatinas de molares superiores foram selecionadas de acordo com a microtomografia computorizada, e foram divididas em dois grupos (n=20): com alargamento do foraminal (CA) e sem alargamento do foraminal (SA). Para padronizar o forame apical, todas as amostras foram instrumentadas com o sistema ProTaper Next até ao instrumento X3 até o forame. O grupo CA foi instrumentado até ao instrumento X5 até o forame, e o grupo SA foi instrumentado 1 mm aquém. Os canais foram obturados 1 mm abaixo do forame apical com gutta-percha e AH Plus e armazenados durante 7 dias a 37 °C e 95% de umidade. As raízes foram fixadas em microtubos preenchidos com gel de ágar a 1,5%. O material obturador foi removido com Reciproc R50. Os escaneamentos dos dentes e do ágar foram realizados com micro-CT e CBCT. A comparação entre grupos e entre métodos foi realizada utilizando o teste Mann-Withney (p ≤0.05). Resultados: Não foi encontrada diferença estatística ao comparar o material extruído entre grupos utilizando o Micro-CT (p = 0,589) ou TCFC (p = 0,953). Foi medido um volume maior de material extruído com a TCFC do que com a Micro- CT (p = 0,0004). Conclusão: O alargamento foraminal não teve qualquer efeito na extrusão do material obturador durante o retratamento. A TCFC favoreceu a avaliação do material de obturador apicalmente extruído.

Abstract Aim: To investigate whether foraminal widening performed at primary treatment has an effect on the amount of apically extruded obturator material during retreatment and to evaluate the sensitivity of cone beam computed tomography (CBCT) in detecting extruded obturator material. Methods: Forty palatal roots of maxillary molars were selected based on micro-CT and divided into two groups (n=20): with foraminal widening (WE) and without foraminal widening (NE). To standardize the apical foramen, all specimens were instrumented to the foramen using the Protaper Next system, up to instrument X3. The WE group was instrumented to the foramen up to instrument X5, and the NE group was instrumented 1 mm lower. The canals were obturated 1 mm below the apical foramen with gutta-percha and AH Plus and stored for 7 days at 37 °C and 95% humidity. Roots were fixed in microtubes filled with 1.5% agar gel. The obturation material was removed with Reciproc R50. Scans of the teeth and agar were performed using micro-CT and CBCT. Comparison between groups and between methods was performed using Mann-Withney test (p ≤0.05). Results: No statistical difference was found when comparing the extruded material between groups using micro-CT (p = 0.589) or CBCT (p = 0.953). CBCT measured a greater volume of extruded material than micro- CT (p = 0.0004). Conclusion: Foraminal widening had no effect on the extrusion of filling material during retreatment. The CBCT favored the evaluation of apically extruded filling material.

Resumo O objetivo deste estudo foi investigar as propriedades físico-químicas e biológicas de um cimento reparador experimental à base de silicato de tricálcio contendo diclofenaco de sódio (CERD). Para o teste físico-químico, MTA, Biodentine e CERD foram manipulados e discos de cimentos foram preparados para avaliar o tempo de presa e a radiopacidade. Retrocavidades foram feitas em dentes de acrílico e preenchidas com cimentos para análise de solubilidade por 7 dias. Tubos de polietileno contendo cimentos foram preparados e os íons cálcio e o pH foram mensurados às 3h, 24h, 72h e 15 dias. Para o teste biológico, SAOS-2 foram cultivadas, expostas aos extratos de cimentos e a proliferação celular foi investigada pelo ensaio de MTT às 6h, 24h e 48h. Tubos de polietileno contendo cimentos foram implantados em ratos Wistar. Após 7 e 30 dias, os tubos foram removidos e processados para análises histológicas. Dados paramétricos e não paramétricos foram realizados. Nenhuma diferença foi identificada em relação ao tempo de presa, radiopacidade e solubilidade. Biodentine liberou mais íons de cálcio do que MTA e CERD; no entanto, nenhuma diferença entre MTA e CERD foi detectada. O pH alcalino foi observado para todos os cimentos e o Biodentine exibiu o pH mais alto. Todos os cimentos promoveram aumento na proliferação celular às 24h e 48h, exceto o CERD às 48h. Biodentine estimulou o metabolismo celular em relação ao MTA e CERD, enquanto CERD foi mais citotóxico do que MTA em 48h. Além disso, nenhuma diferença foi encontrada na resposta inflamatória e na capacidade de mineralização para todos os cimentos. CERD demonstrou propriedades semelhantes a outros cimentos endodônticos disponíveis.

Abstract The aim of this study was to investigate the physicochemical and biological properties of an experimental tricalcium silicate-based repair cement containing diclofenac sodium (CERD). For the physicochemical test, MTA, Biodentine and CERD were mixed and cement disc were prepared to evaluate the setting time and radiopacity. Root-end cavity were performed in acrylic teeth and filled with cements to analyze the solubility up to 7 days. Polyethylene tubes containing cements were prepared and calcium ions and pH were measured at 3h, 24h, 72h and 15 days. For the biological test, SAOS-2 were cultivated, exposed to cements extracts and cell proliferation were investigated by MTT assay at 6h, 24h and 48h. Polyethylene tubes containing cements were implanted into Wistar rats. After 7 and 30 days, the tubes were removed and processed for histological analyses. Parametric and nonparametric data were performed. No difference was identified in relation to setting time, radiopacity and solubility. Biodentine released more calcium ion than MTA and CERD; however, no difference between MTA and CERD were detected. Alkaline pH was observed for all cements and Biodentine exhibited highest pH. All cements promoted a raise on cell proliferation at 24h and 48h, except CERD at 48h. Biodentine stimulated cell metabolism in relation to MTA and CERD while CERD was more cytotoxic than MTA at 48h. Besides, no difference on both inflammatory response and mineralization ability for all cement were found. CERD demonstrated similar proprieties to others endodontic cements available.

Abstract This study aimed to evaluate physicochemical properties of three ready-to-use calcium silicate-based endodontic sealers: Endosequence BC Sealer, Bio C Sealer, and Sealer Plus BC. Radiopacity was evaluated using specimens of 10 mm in diameter and 1 mm in height, along with an aluminum step wedge. For the flow test, 0.5 mL of each sealer was deposited between glass plates and the mean of the measurement of two diameters was considered the cement flow value. For pH and calcium release, root canals of 30 prototypes of upper incisor acrylic resin teeth were filled with sealer and gutta percha point and then immersed in containers with 13 mL of ultrapure water. Both pH and release of calcium ions (atomic absorption spectrophotometer) were measured at 3, 24, 72, and 168 h. Acrylic resin teeth were scanned by Micro-CT 1174 at the time of pH and calcium ion readings for volumetric change analysis. The data were analyzed by ANOVA, Tukey’s, Kruskal-Wallis, and Dunn’s tests. Endosequence BC Sealer presented the lowest, and Bio C Sealer the highest volumetric change after 72 h and 168 h (p < 0.05). Endosequence BC Sealer presented higher radiopacity (p < 0.05). All materials showed alkalinization capacity. All of them presented calcium ion release, with a higher value for Sealer Plus BC. All materials presented alkalinization, calcium release capacity, radiopacity, and flow above the minimum values required by the ISO standard. The highest volumetric loss was experienced by Bio C Sealer and the lowest one by Endosequence BC Sealer.

Abstract Background: The association of scaffolds to repair extensive bone defects can contribute to their evolution and morphophysiological recomposition. The incorporation of particulate biomaterials into three-dimensional fibrin bioproducts together with photobiomodulation therapy (PBM) has potential and can improve regenerative medicine procedures. The objective of this experiment was to evaluate the effects of PBM therapy on critical size defects filled with xenogenic bone substitute associated with fibrin biopolymer. Methods: A critical defect of 8 mm was performed in 36 Wistar male adult rats that were divided into four groups. Groups BC and BC-PBM were defined as controls with defects filled by a clot (without or with PBM, respectively) and groups XS and XS-PBM that comprised those filled with biocomplex Bio-OssTM in association with fibrin biopolymer. PBM was applied immediately after the surgery and three times a week every other day, with the parameters: wavelength of 830 nm, energy density 6.2 J/cm2, output power 30 mW, beam area of 0.116 cm2, irradiance 0.258,62 W/cm2, energy/point 0.72 J, total energy 2.88 J. Fourteen and 42 days after the surgery, animals were euthanatized and subjected to microtomography, qualitative and quantitative histological analysis. Results: The BC-PBM and XS-PBM groups had a similar evolution in the tissue repair process, with a higher density of the volume of new formed bone in relation to the groups without PBM (p = 0.04086; p = 0.07093, respectively). Intense vascular proliferation and bone deposition around the biomaterial particles were observed in the animals of the groups in which biocomplex was applied (XS and XS-PBM). Conclusion: PBM therapy allowed an improvement in the formation of new bone, with a more organized deposition of collagen fibers in the defect area. Biocomplex favored the insertion and permanence of the particulate material in bone defects, creating a favorable microenvironment for accelerate repair process.

Abstract Filling materials should be restricted to the root canal space. However, sometimes it is impossible to control the apical extrusion, in this case, the fate of the filling material and the result of the treatment will depend on its physicochemical properties and biocompatibility. Objective To evaluate the tissue response and bone repair capacity of endodontic sealers that were implanted in the calvaria of Wistar rats, forming the groups (n=16): AH Plus and Sealer Plus, compared to the clot group. Methodology On days 30 and 60, the animals were euthanized, the calvaria was removed and processed for hematoxylin-eosin, immunohistochemistry for collagen type I, Picrosirus red and microtomographic analysis. Data were subjected to ANOVA and Tuckey tests (p<0.05). Results At 30 days, all groups showed an intense inflammatory reaction (p>0.05). At 60 days, the AH Plus and Sealer Plus maintained an intense inflammatory infiltrate compared to the clot group (p<0.05). We observed immunopositive areas for type I collagen in all groups at 30 days and 60 days (p>0.05). We observed more red collagen fibers for the Sealer Plus compared to the clot group at 30 days (p<0.05). Considering the total fibers, the clot group at 30 days compared to 60 days after surgery showed an increase in the amount of matrix (p<0.05). There were no statistical differences between groups for green and yellow fibers (p>0.05). Regarding morphometric parameters, at 30 days, the newly formed bone volume and number of bone trabeculae were higher in the groups with sealers compared to the clot group (p<0.05). At 60 days, AH Plus and Sealer Plus showed greater bone neoformation compared to the clot group (p<0.05). Conclusions Despite AH Plus and Sealer Plus induced an intense inflammatory reaction, they can be considered biocompatible materials, since they allowed bone repair.

Abstract The aim of this study was to evaluate the quality of curved root canal preparation, torsional fatigue, and cyclic fatigue of rotary systems manufactured with different NiTi alloys. Ninety single-rooted canals with curvatures of 15° to 30o were scanned and divided into three groups according to the rotary system used: BT-Race (BTR) – 10.06, 35.00, 35.04; SequenceRotaryFile (SRF) – 15.04, 25.06, 35.04; and ProDesignLogic (PDL) – 25.01, 25.06, 35.05. Each system was used on three specimens. The teeth were prepared, scanned, and analyzed to assess increase in volume, transportation, and centering ability of the root canal. Torsional fatigue of glide path instruments (BTR 10.06, SRF 15.04 and PDL 25.01) and cyclic fatigue of the finishing instrument (BTR 35.04, SRF 35.04 and PDL 35.05) were obtained by analyzing completely new instruments (n = 10) and instruments after they had been used three times (n = 10). After the torsional and cyclic fatigue tests, the fractured surface of the new and used instruments were examined by scanning electron microscopy. Increase in volume, canal transportation, and centering ability showed no significant differences among the groups (p > 0.05). The torsional test showed that SRF 15.04 produced the highest torque values for both new and used instruments, followed by PDL 25.01 and BTR 10.06 (p < 0.05). PDL 25.01, both new and used, exhibited higher values of angular deflection followed by SRF 15.04 and BTR 10.06 (p < 0.05). As regards cyclic fatigue, use of PDL 35.05, both new and used, required a longer time and larger number of cycles than did SRF 35.04 and BTR 35.04 (p < 0.05). Clinical use affected the torsional fatigue of BTR; however, cyclic fatigue was not significantly affected (p < 0.05). All rotary systems were able to prepare the curved canals satisfactorily and were used safely on the three specimens. Relative to torsional fatigue, SRF 15.04 exhibited a higher torque, and PDL 25.01, higher angular deflection. BTR 10.06 was the most affected by clinical use. PDL 35.05 showed greater resistance to cyclic fatigue.

Resumo Objetivos: Este estudo realizou uma revisão sistemática de estudos de prevalência da anatomia analisados por tomografia computadorizada de feixe cônico no intuito de compreender os tipos de configuração da raiz e do canal radicular em subpopulações brasileiras. Métodos: Esta revisão sistemática seguiu os princípios da PRISMA. Quatro bases de dados eletrônicas (PubMed, ScienceDirect, Lilacs e Cochrane Collaboration) foram acessadas utilizando-se termos MeSH e palavras-chave de termos livre. Os estudos foram selecionados de acordo com critérios pré-definidos. Referências dos estudos coletados, 3 jornais endodônticos com revisão em pares e 2 jornais odontológicos com revisão em pares baseados em evidência científica foram manualmente pesquisados. Os autores foram contatados para informações adicionais, se necessário. Os estudos elegíveis foram submetidos a uma avaliação de mérito científico independentemente por 2 avaliadores, os quais também alcançaram um consenso para o escore de cada estudo utilizando-se a ferramenta Joanna Briggs Institute Critical Appraisal para estudos de prevalência. Resultados: Um total de 2.266 estudos foram identificados. Após análise, 20 artigos de periódicos em textos completos foram avaliados para elegibilidade e 17 foram incluídos para síntese quantitativa. Uma alta prevalência de incisivos inferiores apresentando dois canais radiculares foi observada (~35.0% - 40.0%). Além disso, uma alta proporção de segundos pré-molares superiores apresentando morfologia bi-radicular (17.0% - 28.4%) e dois canais radiculares (50.1% - 75.0%) foi identificada. Uma elevada variação e alta prevalência de segundo canal mésio-vestibular foram detectadas para ambos primeiros (37.1% - 88.5%) e segundos (21.8% - 83.4%) molares. Uma prevalência de segundo canal radicular variando entre 12.4% a 23.4% foi observada na raiz distal de primeiros molares inferiores. Conclusões: Em conclusão, diferentes subpopulações brasileiras podem apresentar diferentes características em relação a configuração da raiz e do canal radicular. Os clínicos devem estar cientes destas variações para adequado planejamento do tratamento endodôntico.

Abstract Objectives: This study performed a systematic review of anatomy prevalence studies using cone-beam computed tomography to comprehend the root and root canal configuration types in Brazilian sub-populations. Methods: This systematic review followed PRISMA’s statements. Four electronic databases (PubMed, ScienceDirect, Lilacs, and Cochrane Collaboration) were accessed using MeSH terms and free-text keywords. The studies were selected according to predefined criteria. References of the collected studies, three peer-reviewed endodontic journals, and two peer-reviewed evidence-based dentistry journals were hand searched. The authors were contacted for additional information, if necessary. Eligible studies were submitted to a scientific merit assessment by two evaluators independently, who reached a final consensus for each study score using the Joanna Briggs Institute Critical Appraisal tool for prevalence studies. Results: A total of 2266 studies were identified. After analysis, 20 full-text articles were accessed for eligibility and 17 were included for qualitative synthesis. A high prevalence of mandibular incisors presenting two root canals was noted (~35.0% - 40.0). Moreover, a high proportion of two-rooted (17.0% - 28.4%) and two root canals (50.1% - 75.0%) morphologies were identified in maxillary second premolars. A wide range and a high percentage of a second mesiobuccal canal were detected for both maxillary first (37.1% - 88.5%) and second molars (21.8% - 83.4%). A second root canal prevalence ranging from 12.4% to 23.4% was observed in the distal root of mandibular first molars. Conclusions: In conclusion, different Brazilian sub-populations may present divergent characteristics regarding the root and root canal configurations. Clinicians should be aware of these variations for proper planning of endodontic treatment.

Resumo A resposta de defesa do hospedeiro ao desafio microbiano que emerge do sistema de canais radiculares leva à periodontite apical. Os objetivos deste estudo foram avaliar a expressão de citocinas pró e anti-inflamatórias e Óxido Nítrico (NO) por macrófagos após interação com Enterococcus faecalis no modo: planctônio e de biofilme desalojado; biofilme intacto estimulado por hidróxido de cálcio (CH), CH e clorexidina ou Pasta Tri Antibiótica (TAP). Para isto, a cultura de macrófagos originados de monócitos do sangue periférico de humanos (N=8) foi exposta aos diferentes tipos de bactéria por 24 horas. Então, a quantificação da produção de of Fator de Necrose Tumoral- alfa (TNF-α), interleucina (IL)-1β, IL-6, IL-10 e NO por macrófagos se deu por meio do Luminex xMAP e reação de Greiss, respectivamente. Além dos potenciais efeitos terapêuticos desses compostos, sua atividade antimicrobiana contra E. faecalis também foi testada através microscopia confocal. Os dados dos experimentos foram analisados através do teste de Kruskal-Wallis com Dunn`s post hoc (α < 0.05). Bactéria em modo de biofilme desalojado se mostrou mais agressivo ao sistema imune que as bactérias planctônicas e controle negativo induzindo a maior excreção de NO e TNF-α. Em relação ao biofilme intacto, a atividade antimicrobiana mais fraca ocorreu no grupo de CH. Os grupos CHX e TAP aumentaram significativamente a porcentagem de bactérias mortas na mesma extensão. Interessantemente, o biofilme por ele mesmo não induziu a liberação de citocinas pro-inflamatórias - exceto por NO - enquanto que o biofilme tratado com TAP ou pastas a base de CH aumentaram os níveis de IL-6; e TNF-α e IL-1 β respectivamente. Em contraste, os níveis da potente citocina anti-inflamatória (IL-10) foram aumentados pelo grupo TAP.

Abstract The host defense response to microbial challenge emerging from the root canal system leads to apical periodontitis. The aim of this study was to evaluate the expression of inflammatory cytokines and Nitric Oxide (NO) by macrophages after interaction with Enterococcus faecalis in the: plankton and dislodged biofilm mode; intact biofilm mode stimulated by calcium hydroxide (CH), CH and chlorhexidine (CHX) or Triple Antibiotic Paste (TAP). For this purpose, culture of macrophages from monocytes in human peripheral blood (N=8) were exposed to the different modes of bacteria for 24 hours. Subsequently, the cytokines, such as, Tumor Necrotic Factor- alfa (TNF-α), interleukin (IL)-1β, IL-6, IL-10; and NO were quantified by Luminex xMAP and Greiss reaction, respectively. In addition to the potential therapeutic effects of the intracanal medication, their antimicrobial activity against Enterococcus faecalis biofilm were also tested in vitro by confocal microscopy. The experiments` data were analyzed by the Kruskal-Wallis test with the Dunn post hoc test (α < 0.05). Bacteria in dislodged biofilm mode were shown to be more aggressive to the immune system than bacteria in plankton mode and negative control, inducing greater expression of NO and TNF-α. Relative to bacteria in intact biofilm mode, the weakest antimicrobial activity occurred in Group CH. In Groups CH/CHX and TAP the percentage of dead bacteria was significantly increased to the same extent. Interestingly, the biofilm itself did not induce the release of pro-inflammatory cytokines - except for NO - while the biofilm treated with TAP and CH based pastes enhanced the levels of IL-6 and TNF-α; and IL-1 β, respectively. In contrast, the levels of a potent anti-inflammatory (IL-10) were increased in Group TAP.

Abstract: The present study investigated the intracanal decontamination and apical extrusion of bacteria and debris from root canals instrumented with rotary and reciprocating systems (ProDesign Logic or ProDesign R), with different file diameters and using conventional syringe irrigation (CSI) or passive ultrasonic irrigation (PUI). Eighty extracted mandibular premolars were contaminated with Enterococcus faecalis and randomly assigned to eight experimental groups according to the root canal instrumentation and irrigation technique employed (n = 10): G1: Prodesign Logic 25.06; G2: Prodesign R 25.06; G3 and G4 were instrumented with the same single-file systems, respectively, using 35.05 diameters and CSI. G5, G6, G7, and G8 were instrumented like the previous groups, but with PUI. Apically extruded debris during instrumentation was collected into pre-weighed microtubes. The weight of the empty microtube was subtracted from the final weight to establish the amount of extruded debris. Bacteria from root canals and extruded debris were collected for a microbiological evaluation of colony forming units (CFU/mL). For statistical analyses, the Mann-Whitney and Kruskal-Wallis followed by the Dunn's tests were used (α = 0.05). All instruments caused extrusion of debris. For irrigation techniques, PUI promoted greater debris and bacterial extrusion (p < 0.05). The CFU/mL count indicated that the instrumentation of the experimental groups were equally effective in the decontamination of the root canal (p > 0.05). The systems tested (regarding file diameter and kinematics) were associated with similar amounts of apically extruded debris and root canal decontamination. PUI was associated with greater debris and bacterial extrusion.

Abstract: Sixty moderately curved canals of mandibular molars classified as Vertucci’s type IV canal configuration were selected by micro-CT 1174. The teeth were divided into two groups according to the kinematics used, whether reciprocating or rotary motion (n=30, totaling 60 mesial root canals). The instruments used to perform the glide path procedures had identical features (0.15 mm of tip size, 0.04 mm/mm taper, thermal treatment, and square cross-section), but differed in the direction of the cutting blade. The duration of the procedure and the absolute and percentage frequency of the instruments to reach the full working length were recorded. The torsional test (3630-1; 1992) was performed on both used and unused instruments, to evaluate a possible reduction in the torsional resistance when using the glide path procedure. Statistical analysis was performed using the unpaired t-test and the chi-square test, and the level of significance was set at 5%. The type of kinematics used affected the duration of glide path procedures, and the reciprocating motion seemed to induce less torsional stress during glide path procedures.