Abstract Oral cleft surgical repairs are performed using different techniques worldwide. Objective To evaluate and compare the development of the dental arches of children with unilateral cleft lip and palate before and after the primary surgeries performed with different techniques at the first months and six years of life. Methodology This is a retrospective longitudinal study. The sample comprised 56 dental casts divided int the following groups: Group 1 (G1) – cheiloplasty (Millard technique) at three months and one-step palatoplasty (von Langenbeck technique) at 12 months; and Group 2 (G2) – cheiloplasty (Millard technique) and two-step palatoplasty: anterior hard palate closure (Hans Pichler technique) at three months and posterior soft palate closure (Sommerlad technique) at 12 months. The digitized dental casts were evaluated at three months – pre-surgical (T1) and six years of life– post-surgical (T2). The following linear measurements were analyzed: intercanine (C–C’), intertuberosity (T–T’) distances; anterior dental arch (I–CC’), anterior intersegment (I–C’), and total arch (I–TT’) lengths. The palate area was also measured. Parametric and non-parametric tests were applied (p<0.05). Results In G1, the intragroup comparison showed statistically significant smaller I–CC’ and I–C’ at T2 (p=0.001 and p<0.001, respectively), while T–T’, I–TT’, and area comparisons were significantly greater (p<0.001, p=0.002, and p<0.001, respectively). In G2, the intragroup comparison exhibited statistically significant smaller C–C’ and I–C’ at T2 (p=0.004, for both), whereas T–T’, I–TT’ and area comparisons were significantly greater (p<0.001, p=0.004, and p<0.001, respectively). At T2, the intergroup analysis revealed that G1 had a statistically significant smaller I–CC’ (p=0.014). The analysis of the intergroup differences (∆=T2–T1) showed that G1 had a statistically smaller I–CC’ (p=0.043). Conclusion The two-step palatoplasty showed a more favorable prognosis for the maxillary growth than one-step palatoplasty in children with oral clefts.

Aim to evaluate the surgical effects of two rehabilitation protocols on dental arch occlusion of 5-year-old children with or without cleft lip and palate. Methods this is a retrospective longitudinal study the sample comprised 45 digitized dental casts divided into followed groups: Group 1 (G1) – children who underwent to cheiloplasty (Millard technique) at 3 months and to one-stage palatoplasty (von Langenbeck technique) at 12 months; Group 2 (G2) – children who underwent to cheiloplasty (Millard technique) and two-stage palatoplasty (Hans Pichler technique for hard palate closure) at 3 months and at 12 months to soft palate closure (Sommerlad technique); and Group 3 (G3) – children without craniofacial anomalies. Linear measurements, area, and occlusion were evaluated by stereophotogrammetry software. Shapiro-Wilk test was used to verify normality. ANOVA followed by posthoc Tukey test and Kruskal-Wallis followed by posthoc Dunn tests were used to compared groups. Results For the measures intercanine distance (C-C’), anterior length of dental arch (I-CC’), and total length of the dental arch (I–MM’), there were statistical differences between G1x G3 and G2xG3, the mean was smaller for G1 and G2. No statistically significant differences occurred in the intermolar distance and in the dental arch area among groups. The occlusion analysis revealed significant difference in the comparison of the three groups (p=0.0004). Conclusion The surgical effects of two rehabilitation protocols affected the occlusion and the development of the anterior region of the maxilla of children with oral clefts when compared to children without oral clefts.

RESUMO Objetivo: Comparar a atratividade do perfil facial em pacientes Classe II tratados com Twin Force® ou elásticos intermaxilares. Métodos: A amostra foi composta por 47 pacientes Classe II divididos em dois grupos: G1 - Twin Force® (25 pacientes tratados com aparelhos fixos e o aparelho funcional Twin Force®; idade inicial média de 17,91 ± 7,13 anos, idade final média de 20,45 ± 7,18 anos, e tempo médio de tratamento de 2,53 ± 0,83 anos); G2 - Elásticos (22 pacientes tratados com aparelhos fixos e elásticos intermaxilares de Classe II, idade inicial média de 15,87 ± 5,64 anos, idade final média de 18,63 ± 5,79 anos, e tempo médio de tratamento de 2,75 ± 0,60 anos). Foram usadas telerradiografias laterais pré- e pós-tratamento. As variáveis cefalométricas foram mensuradas, e silhuetas do perfil facial foram construídas e avaliadas por 48 leigos e 63 ortodontistas, que pontuaram a atratividade entre 0 (perfil menos atraente) e 10 (perfil mais atraente). As comparações intergrupos foram realizadas com os testes Mann-Whitney e t de Student para amostras independentes. Resultados: Na fase pré-tratamento, o perfil facial no grupo Twin Force® foi menos atrativo do que no grupo Elásticos. Os tratamentos com o Twin Force® ou com Elásticos de Classe II resultaram em atratividade semelhante do perfil facial, mas a convexidade facial foi mais reduzida no grupo Twin Force®. Os ortodontistas foram mais críticos do que os leigos. Conclusões: Apesar de os tratamentos com o Twin Force® ou com Elásticos de Classe II terem resultado em atratividade semelhante do perfil facial após o tratamento, a atratividade do perfil foi reduzida com o tratamento no grupo Elásticos e melhorou no grupo Twin Force®. A convexidade facial foi mais reduzida com o tratamento no grupo Twin Force®.

ABSTRACT Objective: To compare the facial profile attractiveness of Class II patients treated with Twin Force® or intermaxillary elastics. Methods: Sample comprised 47 Class II patients divided into two groups: G1) TWIN FORCE - 25 patients treated with fixed appliances and Twin Force® fixed functional appliance (mean initial age was 17.91 ± 7.13 years, mean final age was 20.45 ± 7.18 years, and mean treatment time was 2.53 ± 0.83 years); G2) ELASTICS - 22 patients treated with fixed appliances and Class II intermaxillary elastics (mean initial age was 15.87 ± 5.64 years, mean final age was 18.63 ± 5.79 years and mean treatment time was 2.75 ± 0.60 years). Lateral cephalograms from pretreatment and posttreatment were used. Cephalometric variables were measured and silhouettes of facial profile were constructed and evaluated by 48 laypeople and 63 orthodontists, rating the attractiveness from 0 (most unattractive profile) to 10 (most attractive profile). Intergroup comparisons were performed with Mann-Whitney and independent t-tests. Results: At pretreatment, facial profile of the Twin Force® group was less attractive than the Elastics group. Treatment with Twin Force® or Class II elastics resulted in similar facial profile attractiveness, but the facial convexity was more reduced in the Twin Force® group. Orthodontists were more critical than laypeople. Conclusions: Treatment with Twin Force® or Class II elastics produced similar facial profile attractiveness at posttreatment. Profile attractiveness was reduced with treatment in the elastic group, and improved in the Twin Force® group. Facial convexity was more reduced with treatment in the Twin Force® group.

RESUMO Objetivo: Avaliar a influência da contenção fixa 3x3 no apinhamento anterior em casos tratados com extração de incisivo inferior. Métodos: A amostra foi constituída por arquivos ortodônticos das fases pré-tratamento, pós-tratamento e avaliação em longo prazo, de 16 pacientes (10 mulheres e 6 homens) portadores de má oclusão de Classe I tratados com a extração de um único incisivo inferior. As idades médias (± DP) pré-tratamento, pós-tratamento e na avaliação em longo prazo foram 23,45 ± 9,14 anos, 25,50 ± 8,95 anos e 30,11 ± 8,59 anos, respectivamente. O tempo médio (± DP) de tratamento e de acompanhamento em longo prazo foi 2,05 ± 0,45 anos e 4,60 ± 1,85 anos, respectivamente. Nos modelos de gesso, foram avaliados o Índice de Irregularidade de Little e as distâncias interdentárias. A amostra foi dividida em dois subgrupos, de acordo com a presença da contenção fixa 3x3 na avaliação em longo prazo. Resultados: O grupo sem contenção fixa apresentou uma maior recidiva na avaliação em longo prazo, quando comparado com o grupo que tinha a contenção fixa. Conclusão: Houve uma recidiva significativa nos casos tratados com extração de incisivo, na avaliação em longo prazo. O subgrupo sem contenção fixa 3x3 mostrou uma recidiva significativa em longo prazo, quando comparado ao grupo com contenção.

ABSTRACT Objective: To evaluate the 3x3 bonded retainer influence on the mandibular anterior crowding in cases treated with mandibular incisor extraction Methods: The sample comprised pretreatment, posttreatment and follow-up orthodontic records of 16 subjects (10 females and 6 males) with Class I malocclusion treated with extraction of a single mandibular incisor. The mean ages (± SD) at pretreatment, posttreatment and follow-up evaluation were 23.45 ± 9.14 years, 25.50 ± 8.95 years and 30.11 ± 8.59 years, respectively. The mean (± SD) treatment time and posttreatment evaluation time were 2.05 ± 0.45 years and 4.60 ± 1.85 years , respectively. Little irregularity index and interdental widths were evaluated using dental casts. The sample was divided into two subgroups, according to the presence of the 3x3 bonded retainer at follow-up. Results: The subgroup without 3x3 bonded retainer presented a greater relapse at the follow-up, when compared to 3x3 bonded retainer subgroup. Conclusion: There was a significant relapse in cases treated with mandibular incisor extraction at follow-up. The subgroup without 3x3 bonded retainer showed a significant relapse at the follow-up when compared to the retainer group.

RESUMO Objetivo: O objetivo do presente estudo foi avaliar a atratividade de diferentes tipos de fios ortodônticos estéticos, na opinião de leigos e dentistas. Métodos: Foram avaliados cinco tipos diferentes de fios ortodônticos: três fios estéticos (revestidos com teflon, revestidos com resina epóxi e revestidos com ródio) e dois fios metálicos (aço inoxidável e NiTi), como grupo controle. Braquetes de cerâmica monocristalina foram instalados na arcada superior de uma paciente com bom alinhamento dentário, e os cinco fios avaliados foram fixados ao aparelho ortodôntico com ligadura elástica estética de silicone e fotografados. As fotografias foram avaliadas por 163 indivíduos, sendo 110 dentistas e 53 leigos. Os dados foram avaliados estatisticamente pelos testes ANOVA a um e a dois critérios, seguidos pelo teste de Tukey. Resultados: Houve diferença estatisticamente significativa na atratividade entre os fios avaliados. O mais estético foi o fio revestido de ródio, seguido pelo fio revestido de resina epóxica e, finalmente, o fio revestido de teflon, sem diferença significativa entre os fios de aço inoxidável e os de NiTi. Não houve diferença significativa entre os grupos de avaliadores. Conclusão: O mais atraente foi o fio revestido de ródio, seguido pelo fio revestido de resina epóxica e, finalmente, o fio menos atraente foi o fio revestido de teflon, sem diferença estatisticamente significativa para os fios de aço inoxidável e os de NiTi, utilizados como controle.

ABSTRACT Objective: The aim of this study was to evaluate the attractiveness of different types of esthetic orthodontic wires by laypeople and dentists. Methods: Five different types of orthodontic wires were evaluated: three esthetic wires (Teflon-coated, epoxy resin-coated and rhodium-coated wires), and two metallic wires (stainless steel and NiTi), as control. Monocrystalline ceramic brackets were installed in the maxillary arch of a patient presenting good dental alignment. The five evaluated wires were attached to the orthodontic appliance with an esthetic silicone elastic and photographed. The photographs were evaluated by 163 individuals, 110 dentists and 53 laypeople. The data were statistically evaluated by two-way ANOVA and one-way ANOVA, followed by Tukey tests. Results: There was a statistically significant difference in the attractiveness among the wires evaluated; the most esthetic was the rhodium-coated wire, followed by the epoxy resin-coated wire and, finally, the Teflon-coated wire, with no significant difference from the stainless steel and NiTi control archwires. There was no significant difference between the groups of evaluators. Conclusion: The most attractive was the rhodium-coated wire, followed by the epoxy resin-coated wire and, finally, the least attractive wire was the Teflon-coated wire, without statistically significant difference to the stainless steel and NiTi wires, used as control.

Abstract The present study sought to evaluate the impact of quarantine resulting from the coronavirus disease 2019 (COVID-19) pandemic on dental appointments and patients’ positions and concerns regarding their ongoing dental treatment. Patients from private dental clinics answered an online questionnaire anonymously regarding their treatment, availability and willingness to attend dental appointments, and concerns about contamination. Descriptive statistics of the responses were performed with percentages and responses were compared between sexes, regions, and other aspects using the chi-squared test. Five hundred ninety-five patients (412 females and 183 males; mean age: 38.21 years) answered the questionnaire. Most patients reported they were receiving dental treatment (orthodontics) and would attend to a dental appointment; meanwhile, those patients not receiving treatment would not attend or would visit only in the case of an emergency. Males reported to be calmer than females, who were more anxious and afraid; as such, males reported more willing to go a dental appointment while, in general, females were not worried about how quarantine could affect dental treatment. Patients actively undergoing treatment and orthodontic patients were more concerned about a delay in treatment. There was a significant association between feelings about the COVID-19 pandemic and the level of willingness to attend a dental appointment. The quarantine recommended due to the COVID-19 pandemic was shown to have an impact on dental appointments and the anxiety levels of patients, since there was a significant association between patients’ feelings and their willingness to attend a dental appointment. Overall, patients undergoing dental treatment and orthodontics were more willing to attend an appointment and were more concerned about an increase in treatment duration.

RESUMO Objetivo: avaliar a atratividade e a percepção estética do sorriso com alterações simétricas e assimétricas dos zênites gengivais, por leigos, dentistas e ortodontistas. Métodos: foram tiradas fotografias posadas de cinco pacientes, de forma padronizada. Cada fotografia foi digitalmente manipulada no software Keynote, na região do zênite gengival, em incrementos de 0,5 a 1 mm, nos incisivos centrais e laterais superiores, de maneira simétrica e assimétrica, de nove formas diferentes para cada paciente. Posteriormente, essas fotografias foram dispostas em um website para que os avaliadores pudessem observá-las e, conforme sua percepção estética, dessem notas de 1 a 10, sendo 1 para pouco atrativa e 10 para muito atrativa. Foram utilizados os testes Kruskal-Wallis e Mann-Whitney para as comparações. Resultados: os zênites gengivais assimétricos foram considerados menos atrativos do que os simétricos. Diferenças entre os zênites gengivais maiores que 1 mm foram perceptíveis na atratividade do sorriso por todos os grupos de avaliadores. Quando comparados os incisivos centrais e laterais superiores, as alterações estéticas feitas nos incisivos centrais foram mais perceptíveis do que as feitas nos laterais, tanto as simétricas quanto as assimétricas. Os ortodontistas e os clínicos gerais foram mais críticos ao avaliar e perceber as alterações, com os leigos percebendo essa mudança somente a partir de 1 mm de alteração assimétrica no incisivo central superior direito. Conclusões: zênites gengivais assimétricos são menos atrativos do que os simétricos. Diferenças nos zênites maiores que 1 mm são perceptíveis na atratividade do sorriso. Ortodontistas e clínicos gerais são mais críticos ao avaliar sorrisos.

ABSTRACT Objective: To evaluate the smile attractiveness of different gingival zeniths by general dentists, orthodontists and laypersons and the esthetic perception in the symmetric and asymmetric changes in gingival zeniths. Methods: Posed photographs of five patients were taken and digitally manipulated in Keynote software, in the gingival zenith region, in increments of 0.5 to 1mm in maxillary central and lateral incisors, symmetrically and asymmetrically, in nine different ways for each patient. The photos were then uploaded to a website, where evaluators (general dentists, orthodontists and laypersons) could observe and vote according to their esthetic perception, scoring from 1 to 10, 1 being the least attractive and 10 the more attractive. Kruskal-Wallis and Mann-Whitney tests were used for comparison. Results: Asymmetric gingival zeniths were less attractive than symmetrical gingival zeniths; gingival zenith differences greater than 1mm were perceptible in the smile attractiveness, both by laypersons, general dentists and orthodontists. When comparing maxillary central incisors with maxillary lateral incisors, the aesthetic change performed in the central incisors are more perceptible than those performed in lateral incisors, both symmetrical and asymmetrical. In a general way, orthodontists and general dentists are more critical in the evaluation and perception of gingival zenith changes, with the laypersons perceiving this change only from 1mm of maxillary right central incisor asymmetrical change. Conclusions: Asymmetric gingival zeniths are less attractive than symmetrical ones. Gingival zenith differences greater than 1mm are perceptible in the smile attractiveness. Orthodontists and general dentists are more critical in evaluating smile esthetics.

Abstract This study aimed at monitoring the maxillary growth of children with cleft lip/palate in the first two years of life, and to evaluate the effects of primary surgeries on dental arch dimensions. The sample consisted of the three-dimensional digital models of 25 subjects with unilateral complete cleft lip and palate (UCLP) and 29 subjects with isolated cleft palate (CP). Maxillary arch dimensions were measured at 3 months (before lip repair), 1 year (before palate repair), and at 2 years of age. Student’s ttest was used for comparison between the groups. Repeated measures ANOVA followed by Tukey’s test was used to compare different treatment phases in the UCLP group. Paired ttest was used to compare different treatment phases in the CP group. P<0.05 was considered statistically significant. Decreased intercanine distance and anterior arch length were observed after lip repair in UCLP. After palate repair, maxillary dimensions increased significantly, except for the intercanine distance in UCLP and the intertuberosity distance in both groups. At the time of palate repair and at two years of age, the maxillary dimensions were very similar in both groups. It can be concluded that the maxillary arches of children with UCLP and CP changed as a result of primary surgery.

RESUMO Objetivo: o objetivo do presente estudo foi comparar a eficiência de dois protocolos de intrusão de molares superiores com dois e três mini-implantes. Métodos: foram selecionados 25 primeiros molares superiores extruídos por perda de seus antagonistas, de pacientes adultos. A amostra foi dividida em dois grupos, de acordo com o protocolo de intrusão, com dois ou três mini-implantes: o Grupo 1 consistiu de 15 molares que sofreram intrusão com dois mini-implantes; o Grupo 2 foi constituído por 10 molares intruídos por três mini-implantes. As alterações com o tratamento foram analisadas em telerradiografias em norma lateral ao início e ao final da intrusão dos molares superiores. Resultados: os resultados mostraram que não houve diferença na eficiência dos dois protocolos de intrusão. Concluiu-se que molares superiores extruídos podem ser intruídos, com eficiência semelhante, por meio de dois ou três mini-implantes.

ABSTRACT Objective: The aim of this study was to compare the efficiency of two protocols for maxillary molar intrusion with two or three mini-implants. Methods: Twenty five maxillary first molars extruded for loss of their antagonists in adult subjects were selected. The sample was divided into two groups, according to the intrusion protocol with two or three mini-implants. Group 1 consisted of 15 molars that were intruded by two mini-implants. Group 2 consisted of 10 molars intruded by three mini-implants. Changes with treatment were analyzed in lateral cephalograms at the beginning and at the end of intrusion of maxillary molars. Results: Results showed that there was no difference in efficiency for the two intrusion protocols. It was concluded that extruded maxillary molars can be intruded with two or three mini-implants with similar efficiency.

Resumo Objetivo: o objetivo deste estudo foi comparar a expressão do torque em braquetes autoligáveis ativos e passivos e nos convencionais. Métodos: no total, 300 segmentos de fio de aço inoxidável 0,019" x 0,025" foram usados. Seis diferentes marcas de braquetes foram analisadas (Damon 3MX, Portia, In-Ovation R, Bioquick, Roth SLI, Roth Max). Os momentos de torque foram medidos em 120, 240, 360 e 480, utilizando-se um dispositivo de torção de fio associado a uma máquina de ensaios universal. Os dados obtidos foram comparados pela análise de variância, seguida de teste de Tukey para comparações múltiplas. A análise de regressão foi realizada pelo método dos mínimos quadrados, para gerar uma equação matemática da curva ótima de cada marca de braquete. Resultados: foram observadas diferenças estatisticamente significativas na expressão do torque entre todas as marcas de braquetes avaliadas e em todas as torções testadas (p < 0,05). Encontrou-se que o Bioquick apresentou a menor expressão do torque em todas as torções testadas; em contraste, o braquete Damon 3MX apresentou a maior expressão do torque até a torção de 360. Conclusões: o sistema de ligação entre fio e braquete (autoligável ativo ou passivo, ou convencional com ligadura elástica) parece não interferir na expressão final do torque, a qual é dependente da interação entre o fio e o braquete escolhido para ser utilizado na mecânica ortodôntica.

Abstract Objective: The aim of this study was to compare torque expression in active and passive self-ligating and conventional brackets. Methods: A total of 300 segments of stainless steel wire 0.019 x 0.025-in and six different brands of brackets (Damon 3MX, Portia, In-Ovation R, Bioquick, Roth SLI and Roth Max) were used. Torque moments were measured at 12°, 24°, 36° and 48°, using a wire torsion device associated with a universal testing machine. The data obtained were compared by analysis of variance followed by Tukey test for multiple comparisons. Regression analysis was performed by the least-squares method to generate the mathematical equation of the optimal curve for each brand of bracket. Results: Statistically significant differences were observed in the expression of torque among all evaluated bracket brands in all evaluated torsions (p < 0.05). It was found that Bioquick presented the lowest torque expression in all tested torsions; in contrast, Damon 3MX bracket presented the highest torque expression up to 36° torsion. Conclusions: The connection system between wire/bracket (active, passive self-ligating or conventional with elastic ligature) seems not to interfere in the final torque expression, the latter being probably dependent on the interaction between the wire and the bracket chosen for orthodontic mechanics.

A displasia ectodérmica é uma doença congênita rara, que afeta várias estruturas de origem ectodérmica. As principais características na cavidade oral são hipodontia, má formação dentária e subdesenvolvimento do rebordo alveolar. Devido às falhas de retenção das próteses convencionais, novas alternativas de tratamento são necessárias. Este relato de caso descreve o tratamento de reabilitação oral em uma menina de 9 anos de idade com displasia ectodérmica. O tratamento foi realizado com próteses dentárias convencionais sobre mini-implantes. Os mini-implantes promoveram a retenção da prótese. A paciente relatou uma boa adaptação das próteses e satisfação com o tratamento. O aumento da autoestima melhorou as atividades de socialização da criança. Neste estudo de caso, o uso de prótese com mini-implantes foi satisfatória para a retenção da prótese. No entanto, estudos clínicos longitudinais são necessários para testar os mini-implantes como uma alternativa para a reabilitação oral de crianças com displasia ectodérmica.

Ectodermal dysplasia is a rare congenital disease that affects several structures of ectodermal origin. The most commonly related oral characteristics are hypodontia, malformed teeth and underdeveloped alveolar ridges. New alternative treatments are needed due to the failure of the conventional prosthesis retention. This case report outlines the oral rehabilitation treatment of a 9-year-old girl with ectodermal dysplasia. The treatment was performed with conventional prosthesis upon mini-implants. The mini-implants provided prosthetic retention. The patient reported a good adaptation of the dental prosthesis and satisfaction with the treatment. The increased self-esteem improved the socialization skills of the girl. In this case report, use of prosthesis with mini-implants was satisfactory for prosthetic retention. However, clinical studies with long-term follow-up are needed to test the mini-implants as an alternative for oral rehabilitation of children with ectodermal dysplasia.

This study aimed to assess and compare the overall and anterior ratios of tooth size discrepancies in all Angle malocclusion groups. The following null hypothesis (H0) was tested: no difference between tooth size discrepancies (overall and anterior) would be observed among Angle malocclusion groups. The sample comprised of 711 pre-orthodontic treatment study casts of Brazilian patients with a mean age of 17.42 years selected from private practices in Brazil. The casts were divided into 3 groups according to the type of malocclusion: Class I (n = 321), Class II (n = 324), and Class III patients (n = 66). The measurement of the greatest mesiodistal width of the teeth was performed using a centesimal precision digital caliper directly on the study casts, from the distal surface of the left first molar to the distal surface of the right first molar. The overall and anterior ratios between the maxillary and mandibular teeth were evaluated using Bolton’s method. The following statistical tests were applied: chi-square, independent t-test, and one-way ANOVA. Results showed that all Angle malocclusions groups exhibited a ratio compatible with those recommended by Bolton. With respect to the overall and anterior ratios among the malocclusion groups, no statistically significant differences were found. The null hypothesis was accepted because the results showed no differences in the overall and anterior ratios of tooth size discrepancies among different Angle malocclusion groups.

Objetivo: comparar a aceitabilidade e a efetividade do uso de anestésico tópico e anestésico infiltrativo para inserção de mini-implantes ortodônticos, utilizados como dispositivos de ancoragem temporária. Métodos: foram selecionados 40 pacientes, sendo 17 do sexo masculino e 23 do sexo feminino, com idade média de 26 anos, todos em tratamento ortodôntico e necessitando de reforço de ancoragem. Em todos os indivíduos foram instalados mini-implantes bilateralmente em maxila, sendo em um dos lados com anestesia infiltrativa e do lado oposto com anestesia tópica. Esses 40 pacientes responderam dois questionários, sendo um pré- e outro pós-operatório, e foram obtidos índices de dor por meio da escala visual análoga (VAS). Os dados coletados foram analisados por meio de estatística descritiva e os índices de dor foram comparados por meio do teste não-paramétrico de Mann-Whitney. Resultados: verificou-se que 60% dos pacientes se sentiram mais confortáveis com a utilização de anestesia tópica para a inserção dos mini-implantes; 72,5% dos pacientes apontaram a pressão durante a inserção do dispositivo de ancoragem como a sensação mais desagradável de todo o processo; 62,5% dos pacientes sentiram mais dor com o uso de anestesia tópica. Conclusão: concluiu-se que os pacientes apresentaram menor índice de dor com o uso de anestesia infiltrativa e que, também, preferiram esse tipo de anestésico.

Objective: To compare the acceptability and effectiveness of topical and infiltration anesthesia for placement of mini-implants used as temporary anchorage devices. Methods: The sample comprised 40 patients, 17 males and 23 females, whose mean age was 26 years old and who were all undergoing orthodontic treatment and in need for anchorage reinforcement. Mini-implants were bilaterally placed in the maxilla of all individuals, with infiltration anesthesia on one side and topical anesthesia on the other. These 40 patients completed two questionnaires, one before and another after mini-implant placement and pain was measured through a visual analog scale (VAS). The data collected were analyzed using descriptive statistics and the measurements of pain were compared by means of the non-parametric test of Mann-Whitney. Results: It was found that 60% of patients felt more comfortable with the use of topical anesthesia for mini-implant placement; 72.5% of patients described the occurrence of pressure during placement of the anchorage device as the most unpleasant sensation of the entire process; 62.5% of patients felt more pain with the use of topical anesthesia. Conclusion: It was concluded that patients had less pain with the use of infiltration anesthesia, and also preferred this type of anesthetic.

Objectives: The shape memory resulting from the superelasticity and thermoelastic effect is the main characteristic of thermally activated NiTi archwires and is closely related to the transition temperature range (TTR). The aim of this study was to evaluate the TTR of thermally activated NiTi archwires commercially available. Material and Methods: Seven different brands of 0.019"x0.025" thermally activated nickel-titanium archwires were tested as received by differential scanning calorimetry (DSC) over the temperature range from -100°C to 150°C at 10°C/min. Results: All thermally activated NiTi archwires analyzed presented stage transformation during thermal scanning with final austenitic temperature (Af) ranging from 20.39°C to 45.42°C. Three brands of NiTi archwires presented Af close to the room temperature and, this way, do not present properties of shape memory and pseudoelasticity that are desirable in clinical applications. Conclusions: The thermally activated NiTi archwires present great variability in the TTR and the elastic parameters of each NiTi archwire should be provided by the manufacturers, to allow achievement of the best clinical performance possible.

OBJETIVO: avaliar os efeitos dentoesqueléticos do tratamento da má oclusão de Classe II com o aparelho Twin Block comparado a um grupo controle. MÉTODOS: o grupo experimental foi composto por 20 pacientes com idade inicial média de 11,76 anos e que foram tratados por um período de 1,13 anos. O grupo controle foi composto por 25 indivíduos com idade inicial média de 11,39 anos e que foram acompanhados por um período de 1,07 anos. Telerradiografias em norma lateral foram obtidas ao início e final do tratamento para avaliar as alterações decorrentes do tratamento. A comparação intergrupos foi realizada por meio do teste qui-quadrado e do teste t independente. RESULTADOS: o aparelho Twin Block não apresentou alterações significativas no componente maxilar. O componente mandibular revelou um aumento estatisticamente significativo do crescimento efetivo da mandíbula (Co-Gn) e uma melhora significativa da relação existente entre as bases ósseas. Os componentes dentoalveolar superior e inferior apresentaram um significativo componente de inclinação dos dentes anteriores em ambas as arcadas. Os incisivos superiores foram inclinados para lingual e retruídos, ao passo que os incisivos inferiores foram inclinados para vestibular e protruídos. CONCLUSÕES: o aparelho Twin Block apresenta grande efetividade na correção da má oclusão de Classe II esquelética em pacientes em fase de crescimento. A maior parte das alterações ocorridas é de natureza dentoalveolar, com um grande componente de inclinação dentária associado a um significativo efeito esquelético na mandíbula.

OBJECTIVE: The aim of this study was to assess the dentoskeletal effects of Class II malocclusion treatment performed with the Twin Block appliance. METHODS: The experimental group comprised 20 individuals with initial mean age of 11.76 years and was treated for a period of 1.13 years. The control group comprised 25 individuals with initial mean age of 11.39 years and a follow-up period of 1.07 years. Lateral cephalograms were taken at treatment onset and completion to assess treatment outcomes. Intergroup comparison was performed by means of the chi-square and independent t tests. RESULTS: The Twin Block appliance did not show significant effects on the maxillary component. The mandibular component showed a statistically significant increase in the effective mandibular length (Co-Gn) and significant improvement in the maxillomandibular relationship. The maxillary and mandibular dentoalveolar components presented a significant inclination of anterior teeth in both arches. The maxillary incisors were lingually tipped and retruded, while the mandibular incisors were labially tipped and protruded. CONCLUSIONS: The Twin Block appliance has great effectiveness for correction of skeletal Class II malocclusion in individuals with growth potential. Most changes are of dentoalveolar nature with a large component of tooth inclination associated with a significant skeletal effect on the mandible.