The first method by micellar electrokinetic chromatography (MEKC) for the determination of empagliflozin in tablets was developed and validated following the ICH guidelines. The separation was achieved in a fused silica capillary with 50 µm x 40 cm (inner diameter x effective length) at 28 ºC, +28 kV voltage, hydrodynamic injection 4s (50 mBar), detection at 225 nm and paracetamol was the internal standard. The running electrolyte was a mixture of 20 mM tris(hydroxymethyl)aminomethane (pH 10) and 100 mM sodium dodecyl sulphate (1:1). Specificity was evaluated by the stress testing and the method was specific, with no interference of the degradation product. Linearity was observed in the range of 50 to 150 μg/mL (r=0.9999). The method showed adequate accuracy (recovery value=100.60±0.60%), precision (RSD values <2%) and robustness, which was evaluated by a full factorial design 23. Drug degradation kinetics was evaluated in alkaline and acidic conditions and first-order kinetic was observed in both conditions. The cytotoxicity of sample solutions degraded by UVA and UVC radiation, alkaline and acid media were studied as well. A similar cellular viability profile was observed with a slight decrease only in samples degraded by UVC radiation and basic medium

RESUMO: Nanoemulsão óleo/água (O/A) contendo extrato de goldenberry foi elaborada utilizando método de banho ultrassônico de alta energia. A caracterização físico-química da formulação foi realizada pela determinação do pH, diâmetro médio de gotas, índice de polidispersão (PDI) e potencial zeta. A toxicidade das nanoemulsões foi avaliada utilizando ensaios in vitro com linhas celulares tumorais e não tumorais e in vivo utilizando Caenorhabditis elegans. O pH da nanoemulsão foi de 3,84, o diâmetro médio das gotículas foi de 268 ± 7 nm, PDI 0,113 e o potencial zeta -13,94 mV. Os resultados dos ensaios de citotoxicidade empregando células não tumorais indicaram que o extrato associado ou não à nanoemulsão manteve a viabilidade celular em diferentes concentrações testadas. Nos ensaios, utilizando linhagem tumoral, observou-se que a nanoemulsão contendo o extrato apresentou maior atividade antitumoral do que o extrato livre. Quanto aos testes in vivo, não houve mudança na taxa de sobrevivência dos vermes.

ABSTRACT: Oil-in-water (O/W) nanoemulsion containing goldenberry extract was elaborated using a high-energy ultrasonic bath method. Physicochemical characterization of the formulation was carried out by determining pH, mean droplet diameter, polydispersity index (PDI) and zeta potential. Nanoemulsion toxicity was assessed using in vitro assays with tumor and non-tumor cell lines, and in vivo using Caenorhabditis elegans. The pH of the nanoemulsion was 3.84, the mean droplet diameter was 268 ± 7 nm, PDI 0.113 and zeta potential -13.94 mV. Results of the cytotoxicity assays employing non-tumor cells indicated that the extract associated or not with nanoemulsion maintained cell viability at different concentrations tested. In the assays using tumor lineage, it is observed that the nanoemulsion containing the extract had higher antitumor activity than the free extract. As for the in vivo tests, there was no change in the survival rate of the worms.

RESUMO: A extração assistida com ultrassom de alta intensidade (HIU) é uma das técnicas mais simples, rápidas e eficientes na extração de compostos fenólicos e antioxidantes de plantas. Este trabalho foi o primeiro a utilizar HIU na extração destes compostos presentes na fruta goldenberry. As técnicas HIU e extração convencional apresentaram resultados semelhantes com relação aos compostos fenólicos e capacidade antioxidante. Entretanto, o tempo necessário na HIU (5min) foi 24 vezes menor que na extração convencional (120min). Os compostos fenólicos encontrados foram ácido clorogênico, ácido cafeico e rutina. Ensaios de citotoxicidade in vitro foram usados para avaliação dos extratos e os resultados demonstraram que, em ampla faixa de concentração, o extrato mantém a viabilidade celular, indicando assim possível segurança para utilização em alimentos.

ABSTRACT: The high intensity ultrasound-assisted extraction (HIU) is one of the most simple, quick and efficient techniques for the extraction of phenolic and other antioxidant compounds from plants. This is the first application of HIU for the extraction of these compounds from goldenberry fruit. The HIU and conventional extraction techniques showed similar results regarding to phenolic compounds and antioxidant capacity. However, the time required for HIU extraction (5min) was 24 times lower than conventional extraction (120min). Phenolic compounds reported were chlorogenic acid, caffeic acid and rutin. In vitro cytotoxicity assays were used for evaluation of extracts and the results showed that in a wide range of concentration, the extract maintains cell viability, thus indicating the possibility to use it as food with safety.

Abstract The purpose of this study was to prepare and characterize mupirocin-loaded polymeric nanocapsules using two different oils and to develop and validate an analytical method for quantitative determination by high performance liquid chromatography. The mean size of the nanoparticles was 233.05 nm and 275.03 nm for nanocapsules with a rosemary oil like oily core and caprylic/capric triglyceride, respectively, and a good polydispersity index below 0.25 for both formulations. The nanocapsules showed good stability when stored at 40 ºC and room temperature for 30 days. The quantitative method was performed with a mobile phase consisting of ammonium ammonium acetate (0.05 M adjusted to pH 5.0 with acetic acid) and acetonitrile 60:40 (v/v); the flow rate was 0.8 mL/min, UV detection at 230 nm. The analytical method was linear in the range of 5.0-15.0 µg/mL, specific for both oils, accurate, precise (intermediate precision RSD = 1.68% and repeatability RSD = 0.81%) and robust under the evaluated conditions. Therefore, this method can be performed for quantification of mupirocin in polymeric nanocapsules containing both oils.

ABSTRACT This study aimed to improve the water solubility of amiodarone hydrochloride (AMH) via inclusion complexes with β-cyclodextrin, methyl-β-cyclodextrin and 2-hydroxypropyl-β-cyclodextrin. Inclusion complexes were developed by physical mixture, coevaporation, spray-drying and freeze-drying. Solid state analysis was performed using X-ray powder diffraction, differential scanning calorimetry and scanning electronic microscopy. Thermodynamic studies demonstrate that the inclusion complexes of drug into different cyclodextrins were an exothermic process that occurred spontaneously. Water solubility and drug dissolution rates were significantly increased after the formation of inclusion complexes with the cyclodextrins evaluated in relation to the physical mixture and pure drug. The present study provides useful information for the potential application of complexation with amiodarone HCl. This may be a good strategy for the development of solid pharmaceutical dosage forms.

resumo Cloridrato de amiodarona é um agente antiarrítmico que possui baixa solubilidade aquosa e apresenta problemas de absorção. Este estudo teve como objetivo desenvolver complexos de inclusão contendo carreadores hidrofílicos PEG 1500, 4000 e 6000 através dos métodos de fusão e amassamento para avaliar o aumento da solubilidade e taxa de dissolução do cloridrato de amiodarona. As dispersões sólidas e misturas físicas foram caracterizadas por difração de raios-X, espectroscopia no infravermelho com transformada de Fourier, solubilidade em água e perfis de dissolução. Ambos os métodos e carreadores aumentaram a solubilidade do fármaco, no entanto o PEG 6000 aumentou a solubilidade do fármaco na dispersão sólida mais que os outros carreadores. Diferentes meios foram avaliados para o estudo de solubilidade, incluindo água destilada, tampão ácido pH 1,2, tampão acetato pH 4,5 e tampão fosfato pH 6,8. Com base na avaliação dos resultados obtidos no estudo de solubilidade de fases, os carreadores PEG 4000 e PEG 6000 foram selecionados para a preparação das misturas físicas e dispersões sólidas. Todas as formulações foram preparadas nas razões fármaco-carreador de 1:1 a 1:10 (p/p). Os resultados de liberação in vitro que a técnica de dispersão sólida pelo método de fusão na proporção 1:10 (p/p) aumentou significativamente a taxa de dissolução do fármaco. Estudos de difração de raios-X mostraram redução da cristalinidade do fármaco na dispersão sólida. Análise por espectroscopia no infravermelho mostrou interações entre o fármaco e o carreador.

abstract Amiodarone HCl is an antiarrhythmic agent, which has low aqueous solubility and presents absorption problems. This study aimed to develop inclusion complexes containing hydrophilic carriers PEG 1500, 4000 and 6000 by fusion and kneading methods in order to evaluate the increase in solubility and dissolution rate of amiodarone HCl. The solid dispersion and physical mixtures were characterized by X-ray diffraction, FT-IR spectra, water solubility and dissolution profiles. Both methods and carriers increased the solubility of drug, however PEG 6000 enhanced the drug solubility in solid dispersion better than other carriers. Different media were evaluated for the solubility study, including distilled water, acid buffer pH 1.2, acetate buffer pH 4.5 and phosphate buffer pH 6.8 at 37 ºC. Based on the evaluation of the results obtained in the study phase solubility carriers PEG 4000 and PEG 6000 were selected for the preparation of the physical mixture and solid dispersion. All formulations were prepared at drug-carrier ratios of 1:1 to 1:10(w/w). The results of in vitro release studies indicated that the solid dispersion technique by fusion method in proportion of 1:10 (w/w) increased significantly the dissolution rate of the drug. X-ray diffraction studies showed reduced drug crystallinity in the solid dispersions. FT-IR demonstrated interactions between the drug and polymers.

<p>A saxagliptina é uma inibidora potente e seletiva da enzima dipeptidil peptidase 4. É efetiva no tratamento do Diabete <italic>mellitus</italic> tipo 2, pois estimula a produção de insulina pelo pâncreas. No presente estudo, desenvolveu-se e validou-se método por cromatografia líquida de alta eficiência para quantificar o fármaco em comprimidos. O método foi baseado em eluição isocrática, utilizando fase móvel constituída por ácido fosfórico 0,1% pH 3,0-metanol (70 : 30, v/v), fluxo de 1,0 mL.min^-1, com detecção UV em 225 nm. A separação cromatográfica foi alcançada em 8 minutos em coluna Waters XBridge C18 (250 mm x 4,6 mm, 5 µm) mantida à temperatura ambiente. O método proposto mostrou-se específico e robusto para o controle de qualidade de saxagliptina em comprimidos, sendo linear na faixa de concentração de 15,0-100,0 µg.mL^-1 (r>0,999), preciso (RSD<1,49%) e exato, com resultados entre 99,42 e 101,59%. O método mostrou-se indicativo de estabilidade e foi aplicado com sucesso no controle de qualidade de saxagliptina em comprimidos.</p>

<p>Saxagliptin is a potent and selective inhibitor of the enzyme dipeptidyl peptidase 4. It is effective in the treatment of type 2 diabetes mellitus because it stimulates the pancreas to produce insulin. In the present study, a liquid chromatography method was developed and validated to quantify the drug in tablets. This method was based on the isocratic elution of saxagliptin, using a mobile phase consisting of 0.1% phosphoric acid at pH 3.0 - methanol (70: 30, v/v) at a flow rate of 1 mL.min^-1 with UV detection at 225 nm. The chromatographic separation was achieved in 8 minutes on a Waters XBridge C18 column (250 mm x 4.6 mm, 5µm) maintained at ambient temperature. The proposed method proved to be specific and robust for the quality control of saxagliptin in pharmaceutical dosage forms, showing good linearity in the range of 15.0 - 100.0 µg.mL^-1 (r>0.999), precision (RSD<1.49%) and accuracy values between 99.42 and 101.59%. The method was found to be stability indicating and was successfully applied for the analysis of saxagliptin in tablets in a routine quality control laboratory.</p>

O presente estudo descreve o desenvolvimento e validação de um método de dissolução in vitro para avaliação da liberação de diclofenaco potássico suspensão oral. O teste de dissolução foi desenvolvido e validado de acordo com as diretrizes internacionais. Parâmetros como linearidade, especificidade, precisão e exatidão foram avaliados, bem como a influência da velocidade de rotação e a concentração de tensoativono meio. Depois de selecionar as melhores condições, o método foi validado usando o aparato 2 (pás), velocidade de rotação de 50 rpm, 900 mL de água com 0,3% de lauril sulfato de sódio (LSS) como meio de dissolução a 37,0 ± 0,5 ºC. As amostras foram analisadas pelo método de CLAE-UV (PDA). Os resultados obtidos foram satisfatórios para os parâmetros avaliados. O método desenvolvido pode ser útil na rotina de controle de qualidade para as indústrias farmacêuticas que produzem suspensões orais contendo diclofenaco potássico.

The present study describes the development and validation of an in vitro dissolution method for evaluation to release diclofenac potassium in oral suspension. The dissolution test was developed and validated according to international guidelines. Parameters like linearity, specificity, precision and accuracy were evaluated, as well as the influence of rotation speed and surfactant concentration on the medium. After selecting the best conditions, the method was validated using apparatus 2 (paddle), 50-rpm rotation speed, 900 mL of water with 0.3% sodium lauryl sulfate (SLS) as dissolution medium at 37.0 ± 0.5°C. Samples were analyzed using the HPLC-UV (PDA) method. The results obtained were satisfactory for the parameters evaluated. The method developed may be useful in routine quality control for pharmaceutical industries that produce oral suspensions containing diclofenac potassium.

Desenvolveu-se método simples, de baixo custo para determinar o diclofenaco potássico (DP) em suspensão oral, usando coluna de fase reversa (C8, 150 mm x 4,6 mm, 5 µm), fase móvel contendo metanol/tampão fosfato (70:30 v/v, pH 2,5), com fluxo de 1,0 mL/min, método isocrático e detecção no ultravioleta a 275 nm. Observou-se resposta linear (r = 1,0000) na faixa de 10,0-50,0 µg/mL. Avaliaram-se parâmetros de validação, como linearidade, especificidade, precisão, exatidão e robustez. O método apresentou precisão (repetibilidade: desvio padrão relativo = 1,21% e precisão intermediária: entre analista = 0,85%). A especificidade do ensaio foi avaliada pela exposição do diclofenaco potássico a condições de estresse, tais como hidrólise, fotólise, oxidação e alta temperatura. O método apresentou valores de exatidão entre 98,28% e 101,95%. Os resultados mostram a validade do método proposto, que permite a determinação de diclofenaco potássico em suspensão oral e pode ser utilizado como alternativa para análise de rotina desse produto no controle de qualidade.

A rapid, simple and low cost method was developed to determine diclofenac potassium (DP) in oral suspension, using a reverse-phase column (C8, 150 mm x 4.6 mm, 5 µm), mobile phase containing methanol/buffer phosphate (70:30 v/v, pH 2.5), at a flow rate of 1.0 mL/min, isocratic method, and ultraviolet detection at 275 nm. A linear response (r = 1.0000) was observed in the range of 10.0-50.0 µg/mL. Validation parameters such as linearity, specificity, precision, accuracy and robustness were evaluated. The method presented precision (repeatability: relative standard deviation = 1.21% and intermediate precision: between-analyst = 0.85%). The specificity of the assay was evaluated by exposure of diclofenac potassium under conditions of stress such as hydrolysis, photolysis, oxidation and high temperature. The method presented accuracy values between 98.28% and 101.95%. The results demonstrate the validity of the proposed method that allows determination of diclofenac potassium in oral suspension and may be used as an alternative method for routine analysis of this product in quality control.

The goal of this study was to evaluate the feasibility of preparing nanocapsules and nanoemulsions using tea tree oil as oily phase aiming to protect its volatilization. The nanostructures presented nanometric mean size (160-220 nm) with a polydispersity index below 0.25 and negative zeta potential. The pH values were 6.43 ± 0.37 and 5.98 ± 0.00 for nanoemulsions and nanocapsules, respectively. The oil content after preparation was 96%. The inclusion of tea tree oil in nanocapsules showed higher protection against volatilization. The analysis of mean size and polydispersity index of formulations presented no significant alteration during the storage time.

For determination of aliskiren in commercial samples, an analytical UV spectrophotometric method was developed and validate according to ICH guideline. The method was linear in the range between 40 and 100 μg mL-1 (r² = 0.9997, n = 7) and exhibited suitable specificity, accuracy, precision, and robustness. It is simple, it has low cost, and it has low use polluting reagents. Therefore, the proposed method was successfully applied for the assay and dissolution studies of aliskiren in tablet dosage forms, and the results were compared to a validated RP-LC method, showing non-significant difference (P > 0.05).

A reversed-phase liquid chromatographic (LC) and ultraviolet (UV) spectrophotometric methods were developed and validated for the assay of bromopride in oral and injectable solutions. The methods were validated according to ICH guideline. Both methods were linear in the range between 5-25 μg mL-1 (y = 41837x - 5103.4, r = 0.9996 and y = 0.0284x - 0.0351, r = 1, respectively). The statistical analysis showed no significant difference between the results obtained by the two methods. The proposed methods were found to be simple, rapid, precise, accurate, and sensitive. The LC and UV methods can be used in the routine quantitative analysis of bromopride in oral and injectable solutions.

This work reports the validation of an analytical UV spectrophotometric method to assay dexamethasone in tablets (assay and dissolution studies). The method was linear in the range between 1 and 30 µg mL-1 presenting a good correlation coefficient (r = 0.9998, n = 7). Precision and accuracy analysis showed low relative standard deviation (< 2.00%) and good percentual recoveries (95-105%). The procedure was linear, accurate, precise, and robust. The method is simple, and it has low cost. It does not use polluting reagents and can be applied in dissolution studies, being an adequate alternative to assay dexamethasone in tablets.

O sulfato de indinavir é um inibidor da protease no ciclo do vírus da imunodeficiência humana (HIV). O objetivo deste trabalho foi o desenvolvimento da formulação, desenvolvimento e avaliação da metodologia para dissolução, estudo micromerítico, transposição de escala industrial, estudo de estabilidade e estudo comparativo para cápsulas de sulfato de indinavir 500 mg (equivalente a 400 mg de indinavir). Para o desenvolvimento farmacotécnico, realizou-se uma planificação qualitativa de diluentes. As metodologias analíticas para peso médio, desintegração, umidade e uniformidade de peso, seguiram The United States Pharmacopeia 28, enquanto que a metodologia utilizada para dissolução foi desenvolvida e avaliada atendendo à Resolução RE nº 899, de 29 de maio de 2003, da Agência Nacional de Vigilância Sanitária (ANVISA). Os resultados demonstraram que a formulação selecionada correspondeu às especificações de controle físico-químico, além de apresentar viabilidade econômica. Os resultados obtidos com o desenvolvimento e avaliação do método para dissolução mostram que o método atende aos requisitos de Boas Práticas de Fabricação e Controle, pois apresentam a reprodutibilidade, a precisão, a robustez e finalmente a confiabilidade requerida para um método analítico. As cápsulas desenvolvidas de sulfato de indinavir, quando comparadas com o medicamento de referência, são equivalentes entre si, frente a diferentes parâmetros avaliados.

Indinavir sulfate is a protease inhibitor in the cycle of the human immunodeficiency virus (HIV). The purpose of this study was the development of formulation, and its evaluation methodology for dissolution, rheological study, scale transposition, stability study and comparative study for indinavir sulfate 500 mg capsules (equivalent to 400 mg of indinavir). A qualitative design of diluents has been performed for the pharmaceutics development. The analytical methodologies for medium weight, disintegration, humidity and uniformity of weight followed The United States Pharmacopeia 28, while the methodology used for dissolution was developed and evaluated in accordance with Resolution RE nº 899, as of May 29, 2003, issued by the Agência Nacional de Vigilância Sanitária [National Agency for Sanitary Surveillance] (ANVISA). The results have evidenced that the selected formulation corresponds to the specifications of physical-chemical control, besides showing its economic feasibility. The results obtained from the development and evaluation of dissolution method have evidenced that the method complies with the requirements of Good Manufacturing and Control Practices, since it shows the reproducibility, the precision, the robustness and finally the reliability required for an analytical method. The developed indinavir sulfate capsules, when compared with the reference drug, are equivalent, in the light of different evaluated parameters.