Abstract This paper investigated the formation of crosslinks in natural rubber compounds in the vulcanization systems: conventional (CV), semi-efficient (SEV), and efficient (EV), processed with three types of accelerators: MBTS (dibenzothiazole disulfide), TMTD (tetramethylthiuram disulfide) and CBS (n-cyclohexyl 2-benzothiazole sulfenamide). The cross-linked densities were determined by organic solvent swelling, dynamic mechanical analysis (DMA), stress vs strain, and low-field nuclear magnetic resonance, the latter being the reference technique for comparison with the other results. It was found that the choice of accelerator type influences the processing time and the cross-linked density of the vulcanizate. The four techniques showed close values of cross-linked density for natural rubber compounds, demonstrating that the analytical techniques studied can be applied to determine cross-linked density.

Waste recycling has been the subject of numerous scientific researches regarding the environmental care. This paper reports the redirecting of sugarcane bagasse ash (SBA) as new filler to natural rubber (NR/SBA). The NR/SBA composites were prepared using an opened cylinder mixer to incorporate the vulcanization agents and different proportions of residue (SBA). The ash contains about 70-90% of inorganic compounds, with silica (SiO2) being the main compound. The SBA incorporation improved the mechanical properties of the vulcanized rubber. Based on these results, a new use is proposed for the agro-industry organic waste to be implemented in the rubber vulcanization process, aimed at improving the rubber physical properties as well as decreasing the prices of natural rubber composites.