Abstract This study aimed to assess the influence of the file format on the image quality parameters (image noise, brightness, and uniformity) of periapical radiographs acquired with different digital systems. Radiographic images of an acrylic phantom were acquired with two digital systems - Digora Toto and Express, and exported into five different file formats - TIFF, BMP, DICOM, PNG, and JPEG. Image noise, image brightness (mean of gray values), and image uniformity (standard deviation of gray values) were evaluated in all images. A two-way analysis of variance with Tukey’s test as a post-hoc test was used to compare the results, considering the file formats and radiographic systems as the studied factors. A significance level of 5% was adopted for all analyses. The DICOM image file format presented lower image noise, higher brightness (higher mean gray values), and greater image uniformity (p<0.001) than the other file formats, which did not differ from each other for both digital radiography systems (p>0.05). The Express system revealed lower image noise and greater image uniformity than the Digora Toto system regardless of the image file format (p<0.001). Moreover, the Express showed higher brightness than the Digora Toto for all image file formats (p<0.001), except for the DICOM image file format, which did not significantly differ between the digital radiography systems tested (p>0.05). The DICOM image file format showed lower image noise, higher brightness, and greater image uniformity than the other file formats (TIFF, BMP, PNG, and JPEG) in both digital radiography systems tested.

Resumo Este estudo teve como objetivo avaliar a influência do formato do arquivo nos parâmetros de qualidade de imagem (ruído de imagem, brilho e uniformidade) de radiografias periapicais adquiridas com diferentes sistemas digitais. As imagens radiográficas de um fantoma de acrílico foram adquiridas com dois sistemas digitais - Digora Toto e Express, e exportadas em cinco formatos de arquivo diferentes - TIFF, BMP, DICOM, PNG e JPEG. O ruído da imagem, o brilho da imagem (média dos valores de cinza) e a uniformidade da imagem (desvio padrão dos valores de cinza) foram avaliados em todas as imagens. A análise de variância (ANOVA) bidirecional com o teste post-hoc de Tukey foi aplicada para comparar os resultados, considerando os formatos de arquivo e os sistemas radiográficos como os fatores estudados. Um nível de significância de 5% foi adotado para todas as análises. O formato de arquivo de imagem DICOM apresentou menor ruído de imagem, maior brilho (maiores valores médios de cinza) e maior uniformidade de imagem (p<0,001) do que os outros formatos de arquivo, que não diferiram entre si para ambos os sistemas de radiografia digital (p>0,05). O sistema Express apresentou menor ruído de imagem e maior uniformidade de imagem que o sistema Digora Toto, independentemente do formato do arquivo de imagem (p<0,001). Além disso, o Express mostrou maior brilho do que o Digora Toto para todos os formatos de arquivo de imagem (p<0,001), exceto para o formato de arquivo de imagem DICOM, que não diferiu significativamente entre os sistemas de radiografia digital testados (p>0,05). O formato de arquivo de imagem DICOM mostrou menor ruído de imagem, maior brilho e maior uniformidade de imagem do que os outros formatos de arquivo (TIFF, BMP, PNG e JPEG) em ambos os sistemas de radiografia digital testados.

Abstract The study aimed to assess the influence of excessive use of a photostimulable phosphor plate (PSP) on the density, image noise, and contrast of radiographs. For that, radiographs of an acrylic block were acquired with a PSP of the Express intraoral system to assess the density and image noise. Initially, five images were obtained and exported (first group). After 400 exposures to X-rays and scannings of PSP, other five images were obtained and exported (second group). The same procedure was done after 800 (third group), 1200 (fourth group), 1600 (fifth group), and 2000 acquisitions (sixth group), resulting in 30 images to be evaluated. The mean and standard deviation of the gray values were calculated for the images using the ImageJ software. For contrast analysis, radiographs of an aluminum step-wedge were acquired with a new PSP following the same acquisition intervals. The percentage of contrast variation was calculated. Another two unused PSP receptors were employed to evaluate the method’s reproducibility. The comparison of the results among the acquisition groups was performed with one-way Analysis of Variance (α=0.05). Intraclass Correlation Coefficient (ICC) assessed the reproducibility of the receptors. Image noise did not differ among the groups (p>0.05). There was a slight increase in density after 400 acquisitions and a slight difference in contrast for all acquisition groups without a pattern of increase or decrease (p<0.05). ICC showed excellent reliability for the methods. Therefore, excessive PSP use slightly affected the radiograph’s density and contrast.

Resumo Objetivou-se avaliar a influência do uso excessivo de uma placa de fósforo fotoestimulável (PSP) na densidade, ruído e contraste das radiografias. Foram adquiridas radiografias de um bloco de acrílico com uma PSP do sistema intraoral Express para avaliar a densidade e o ruído da imagem. Inicialmente, cinco imagens foram obtidas e exportadas (primeiro grupo). Após 400 exposições aos raios X e escaneamentos, outras cinco imagens foram obtidas e exportadas (segundo grupo). O mesmo procedimento foi feito após 800 (terceiro grupo), 1200 (quarto grupo), 1600 (quinto grupo) e 2000 aquisições (sexto grupo), resultando em 30 imagens a serem avaliadas. A média e o desvio padrão dos valores de cinza foram calculados para as imagens usando o software ImageJ. Para análise de contraste, foram adquiridas radiografias de uma escala de alumínio com uma nova PSP seguindo os mesmos intervalos de aquisição. A porcentagem de variação do contraste foi calculada. Outras duas PSP sem uso prévio foram utilizadas para avaliar a reprodutibilidade dos métodos. A comparação dos resultados entre os grupos de aquisição foi realizada pela Análise de Variância one-way (α=0,05). O Coeficiente de Correlação Intraclasse (ICC) avaliou a reprodutibilidade dos receptores. O ruído da imagem não diferiu entre os grupos (p>0,05). Houve um leve aumento na densidade após 400 aquisições e uma pequena diferença no contraste para todos os grupos de aquisição sem padrão de aumento ou diminuição (p<0,05). O ICC mostrou excelente confiabilidade para os métodos. Portanto, o uso excessivo da PSP afetou levemente a densidade e o contraste radiográfico.

ABSTRACT: Generally, primary methods of identification as the fingerprint analysis, dental analysis or DNA examination are indicated for the establishment of the identity of a corpse. In situations with poor body conservation, such as in advanced stage of putrefaction or skeletonization, imaging exams like medical and dental computed tomography can assist in the process of identification. The frontal sinuses present anatomical characteristics that allow the establishment of the identity of an in dividual. In this case report we used the technique of three-dimensional construction of the frontal sinuses through the generation of solid figures representative of the sinus morphology. After the comparative analysis of the antemortem and postmortem tomography of the alleged victim, we could establish similarities in both the variations in size, shape, symmetry and contour of borders, and the presence and number of septa, allowing us to infer that the two images described belong to the same individual, thus establishing the identity of the corpse found.

RESUMEN: Generalmente, los métodos primarios de identificación como el análisis dactiloscópico, el análisis dental o el examen de ADN están indicados para el establecimiento de la identidad de un cadáver. En situaciones de mala conservación del cuerpo, como en etapa avanzada de putrefacción o esqueletización, los exámenes de imagen como la tomografía computarizada médica y dental pueden ayudar en el proceso de identificación. Los senos frontales presentan características anatómicas que permiten establecer la identidad de un individuo. En este reporte de caso utilizamos la técnica de construcción tridimensional de los senos frontales a través de la generación de figuras sólidas representativas de la morfología sinusal. Tras el análisis comparativo de la tomografía antemortem y postmortem de la presunta víctima, pudimos establecer similitudes tanto en las variaciones de tamaño, forma, simetría y contorno de márgenes, como en la presencia y número de septos, lo que nos permite inferir que las dos imágenes descritas pertenecen al mismo individuo, estableciéndose así la identidad del cadáver encontrado.

Abstract This study aimed to assess the microstructure, chemical composition, and image quality of different photostimulable phosphor plates (PSP). Four PSP systems, Express®, Digora®, VistaScan®, and Apixia,® were assessed. Five radiographs of a homogeneous acrylic phantom were obtained with the PSP of each system, to acquire a total of 20 images. The images were objectively evaluated for uniformity using mean grey and standard deviation (SD) of their grey values. PSP receptors were analyzed using scanning electron microscopy (SEM) to determine the thickness of the granule layer and the size of the granules. The chemical composition of the PSP receptors was analyzed using total reflection X-ray fluorescence (TXRF). VistaScan showed more uniform and higher density images than the other tested systems (p < 0.05), as well as the lowest SD of grey values (p < 0.05). Regarding the microstructure of the receptors, Digora and VistaScan had thicker granule layers than Express and Apixia, and VistaScan had smaller granules than Digora and Express (p < 0.05). Fourteen chemical elements were detected in the receptors, with barium being the element with the highest concentration in all PSP systems. The microstructure, chemical composition, and image quality varied among all four PSP receptors studied. VistaScan receptors showed the smallest variation in granule size, one of the thickest granule layers, and the most uniform and least noisy images.

Abstract: Evaluating factors that may influence the nose dimensions and, therefore, contribute to the singularity of a person, is important for obtaining a precise facial reconstruction (FR) in forensic anthropology. Thus, the aim in this study was to evaluate the influence of sex, skeletal class, and facial type on nose dimensions of Brazilian individuals using cone-beam computed tomography (CBCT) scans. CBCT images of 54 males and 67 females were classified according to skeletal class (class I, II, or III) and facial type (brachycephalic, dolichocephalic and mesocephalic). Linear and angular measurements of the nose were performed using the CS 3D Imaging software. The measurements obtained for males and females were compared by one-way ANOVA. Two-way ANOVA was used to compare the measurements in the different skeletal classes and facial types. Significance level was set at 5%. All linear measurements were greater in males (p < 0.05); the angular measurements, however, did not differ between sexes (p > 0.05). Linear and angular measurements of class III males were significantly different from the other classes; the same was observed for the angular measurements in females (p < 0.05). Regarding facial types, some linear measurements were significantly greater in dolichocephalics males (p < 0.05). For females, there was no influence of facial type (p > 0.05), except for the nasal convexity angle. Nose dimensions differed in specific points among different skeletal classes and facial types, and there was sexual dimorphism in all linear nose dimensions. This information may be applicable for nose reconstructions, allowing more reliable FR.

Resumen La enfermedad Coronavirus 2019, fue declarada pandemia por la Organización Mundial de la Salud el 11 de marzo de 2020; el primer caso registrado en Costa Rica fue el 6 de marzo de 2020, y 105 días después reportó 2058 casos, con un amplio rango de edad (0-92 años). Su agente etiológico es el beta coronavirus SARS- CoV-2. La transmisión de humano a humano está bien confirmada principalmente por la vía respiratoria. La presencia de portadores asintomáticos del virus y su transmisión, incluso sin la manifestación de síntomas, desafía a los profesionales de la salud. Por esta razón, es obligatorio asumir todos los pacientes que necesitan atención dental como posibles portadores del SARS-CoV-2 y, en consecuencia, aplicar medidas de bioseguridad con criterios estrictos. En la presente revisión de la literatura, nuestro objetivo es recomendar las medidas de bioseguridad que se aplicarán durante los exámenes de imágenes de pacientes dentales debido a la pandemia de Coronavirus-2019. Encontramos que en ausencia de tratamiento para la enfermedad de COVID-19 y debido a su alta transmisibilidad, las medidas más efectivas para prevenir su propagación son aquellas que permitan su contención. Por lo tanto, se recomienda: 1) adquirir exámenes por imágenes solo en caso de urgencias o emergencias dentales, 2) priorizar el uso de exámenes extraorales, como la radiografía panorámica o CBCT, bajo el principio de ALADAIP y 3) se deben usar los exámenes intraorales solo en caso de falta de dispositivos de imágenes extraorales, o por la necesidad de resolver tareas de diagnóstico en las que tienen un valor de diagnóstico superior al de los exámenes extraorales.

Abstract The Coronavirus 2019 disease (COVID-19), was declared a pandemic by the World Health Organization on March 11, 2020, and registered the first case in Costa Rica on March 6, 2020, and 105 days later reported 2058 cases, with a wide age range (0-92 years). Its etiologic agent is the beta coronavirus SARS-CoV-2 with confirmed human- to-human transmission, mainly by the respiratory route. The presence of asymptomatic carriers of the virus and its transmission even without the manifestation of symptoms challenges health professionals worldwide. For this reason, assuming all patients who need dental care as possible carriers of the SARS-CoV-2 is mandatory and consequently, applying biosecurity measures with strict criteria. In the present literature review, we aim to recommend biosecurity measures to be applied during imaging examinations of dental patients due to the Coronavirus-2019 pandemic. We found that in the absence of treatment for COVID-19 disease and because of its high transmissibility, the most effective measures to prevent its spread are those allowing its containment. Therefore, the authors recommend: 1) acquiring imaging exams just in case of dental urgencies or emergencies, 2) prioritizing the use of extraoral exams, such as panoramic radiography or CBCT, under the principle of ALADAI and 3) the intraoral exams should be used just in case of a lack of extraoral imaging devices, or because of the need to solve diagnostic tasks in which they have a superior diagnostic value than those of the extraoral examinations.

Abstract This study aims to assess the influence of high-density material on the radiographic diagnosis of proximal caries in digital systems with automatic exposure compensation, and to evaluate the effect of subjective adjustment of brightness and contrast to undertake this diagnostic task. Twenty bitewing radiographs of forty posterior human teeth with non-cavitated carious lesions, confirmed by micro-CT, were obtained with two digital systems. A porcelain-fused-to-metal crown attached to a titanium implant was inserted into the exposed area, and all the radiographs were repeated. Five radiologists assessed the radiographs and diagnosed proximal carious lesions. Afterwards, the observers were asked to adjust image brightness and contrast, based on their subjective perception, and to reassess the images. Thirty percent of each experimental group was reassessed to test intraobserver reproducibility, totaling 208 images per observer. Intraobserver and interobserver agreements ranged from fair to substantial. Sensitivity, specificity, predictive values, and area under the ROC curve were calculated and compared for each radiographic system, using ANOVA (α = 0.05). Overall, presence of high-density material and adjustment of brightness and contrast did not significantly influence the radiographic diagnosis of proximal caries (p ≥ 0.05). Regarding Digora Optime, adjustment of brightness and contrast significantly increased (p < 0.05) the diagnostic accuracy of proximal carious lesions in the presence of high-density material. In conclusion, the presence of high-density material in the X-rayed region does not influence radiographic diagnosis of proximal caries. However, when it is present in the X-rayed area, subjective adjustment of brightness and contrast is recommended for use with the Digora Optime digital system.

RESUMO Objetivo: Analisar medidas mandibulares obtidas de 225 tomografias computadorizadas do “Biobanco Osteológico e Tomográfico da Faculdade de Odontologia de Piracicaba Universidade Estadual de Campinas”, visando verificar a existência de relação entre essas medidas, o dimorfismo sexual e a ancestralidade. Métodos: Buscou-se estabelecer um modelo matemático capaz de estimar sexo e ancestralidade. Destas tomografias, 126 eram do sexo masculino, 94 do sexo feminino e 5 estavam sem identificação, com idades entre 15 e 100 anos, e ancestralidade conhecida para o fenótipo cor da pele (branco, negro, pardo e amarelo). Foram realizadas medidas entre os pontos: kondylion lateral direito e kondylion lateral esquerdo; kondylion lateral direito e pogônio; kondylion lateral esquerdo e pogônio; borda mesial do forame mentoniano direito e borda mesial do forame mentoniano esquerdo. Analisou-se também a área delimitada pelo triângulo formado pelas medidas entre kondylion lateral direito e kondylion lateral esquerdo; kondylion lateral direito e pogônio; e kondylion lateral esquerdo e pogônio. O teste t de Student para variâncias homogêneas demonstrou que houve diferença estatística nas médias em função do sexo, à exceção da medida de área, que não foi utilizada no modelo. Resultados: Foi possível estabelecer um modelo matemático com acurácia de 69,2%. Não houve diferença estatística nas médias em função da ancestralidade. Conclusão: Conclui-se que as medidas investigadas auxiliam no processo de estimativa do sexo, porém não foram adequadas para estimar a ancestralidade. A metodologia proposta deve ser expandida para outros grupos populacionais para que possa ser aperfeiçoada.

ABSTRACT Objetive: The objective of this study was to analyze mandibular measurements obtained from 225 computed tomography scans of the Osteological and CT Biobanks of Faculdade de Odontologia de Piracicaba Universidade Estadual de Campinas, aiming to verify the existence of a relationship between these measures and sexual dimorphism and ancestry. Methods: We sought to establish a mathematical model capable of estimating sex and ancestry. Of these scans, 126 were male, 94 were female and 5 were unidentified, aged 15 to 100 years, and ancestry known for the skin color phenotype (white, black, brown and yellow). Measurements were made between the following points: right lateral condylion and left lateral condylion; right lateral condylion and pogonion; left lateral condylion and pogonion; mesial border of right mental foramen and mesial border of left mental foramen. The area delimited by the triangle formed by the measurements between right lateral condylion and left lateral condylion was also analyzed; right lateral condylion and pogonion; and left lateral condylion and pogonion. Student t test for homogeneous variances showed that there was statistical difference in the means as a function of sex, except for the area measure, which was not used in the model. Results: It was possible to establish a mathematical model with accuracy of 69.2%. There was no statistical difference in the averages as a function of ancestry. Conclusion: It is concluded that the measures investigated help in the process of estimating sex, but were not adequate to estimate ancestry. The proposed methodology should be expanded to other population groups so that it can be improved.

RESUMO Racional: A perda óssea sistêmica pode levar à destruição periodontal mais severa, diminuindo a densidade mineral óssea local. Objetivo: Investigar as associações entre padrão ósseo alveolar, concentrações de leptina salivar e estado periodontal em mulheres obesas na pré-menopausa e eutróficas. Métodos: Foram avaliadas 30 mulheres com obesidade mórbida (G1) e 30 com peso normal (G2). Foram analisadas as medidas antropométricas e periodontais (profundidade de sondagem - PS, nível clínico de inserção - NCI, presença de cálculo, sangramento à sondagem - SS e acúmulo de placa). O impacto da saúde bucal na qualidade de vida foi mensurado por meio do questionário OHIP-14. Radiografia panorâmica foi utilizada para obter o índice mandibular panorâmico (PMI), índice cortical mandibular (MCI) e índice mental (MI); já a radiografia periapical intraoral (AF) para medir o volume ósseo trabecular total. A leptina salivar foi coletada no período da manhã com a paciente em jejum. Resultados: Os grupos 1 e 2 diferiram em todos os aspectos antropométricos, exceto em estatura. Profundidade de bolsa, cálculo, SS e índice de placa foram piores no G1. Não foram encontradas diferenças entre os grupos considerando o OHIP. Indivíduos com peso normal apresentaram maior proporção de trabéculas ósseas densas do que os obesos para pré-molares, mas não para molares. Índices radiomorfométricos não diferiram entre os grupos e estavam dentro de valores normais. A concentração de leptina esteve associada ao IMC. Conclusão: A obesidade afetou as condições periodontais, o padrão ósseo alveolar e a concentração de leptina salivar.

ABSTRACT Background: Systemic bone loss may lead to more severe periodontal destruction, decreasing local bone mineral density. Aim: A cross-sectional designed was performed to study associations among alveolar bone pattern, salivary leptin concentrations, and clinical periodontal status in premenopausal obese and eutrophic women. Methods: Thirty morbid obese (G1) and 30 normal-weight (G2) women were included. Anthropometric and periodontal measurements (probing depth - PD, clinical attachment levels - CAL, presence of calculus, bleeding on probing -BOP, and plaque accumulation) were assessed. OHIP-14 was used for assessment of oral health impact on quality of life. Panoramic radiography was used to obtain the panoramic mandibular index (PMI), mandibular cortical index (MCI), and mental index (MI). Intraoral periapical (PA) radiography was taken to measure the total trabecular bone volume. Leptin was measured in saliva of fasted overnight women. Results: Groups 1 and 2 differed in all anthropometric aspects, but height. Pocket depth, calculus, BOP, and plaque index were worse in G1. No differences between groups were found considering OHIP. Normal-weight subjects showed higher proportion of dense bone trabeculae than obese subjects for pre-molars, but not for molars. Mental and panoramic mandibular indexes did not differ and were in normal level. Leptin concentration was dependent only on BMI. Conclusion: Obesity affected the periodontal conditions, the alveolar bone pattern, and the salivary leptin concentration.

SUMMARY: The objective of this study was to investigate the prevalence and location of maxillary sinus septa prior to dental implant therapy in different age groups by cone beam computed tomography (CBCT) and identify the most helpful orthogonal plane for this purpose. CBCT scans of 200 patients were selected. The final sample was divided into four groups according to age: (1) 30-39 y.o.; (2) 40-49 y.o.; (3) 50-59 y.o.; (4) +60 y.o. Three calibrated examiners assessed the presence and location (anterior, middle, posterior) of sinus septa using all orthogonal slices. The prevalence of septa per region and plane was compared by chi-square test. Among 359 maxillary sinuses evaluated, it was observed at least one septum in 163 sinuses (45.4 %). Overall, the anterior region was the most prevalent. However, when the age groups were considered, the anterior region was only the most prevalent in groups 2 and 3. The middle and posterior regions were more prevalent in groups 4 and 1, respectively. In conclusion, the prevalence of maxillary sinus septa in patients who were candidate to dental implant therapy was notably high. It was observed that the anterior region of the sinus was the most prevalent and the axial slice was the most representative.

RESUMEN: El objetivo de este estudio fue investigar la prevalencia y localización del septo del seno maxilar antes del tratamiento con implantes dentales en diferentes grupos etarios, por medio de la Tomografía Computarizada de Haz Cónico (TCHC). Fueron seleccionadas TCHC de 200 pacientes. La muestra final fue dividida en cuatro grupos de acuerdo con la edad: (1) 30-39 años; (2) 40-49 años; (3) 50-59 años y (4) +60 años. Tres examinadores calibrados evaluaron la presencia y localización (anterior, media o posterior) del septo del seno maxilar usando todas las secciones ortogonales. La prevalencia del septo por región y plano fue comparada mediante el test x-cuadrado. Entre los 359 senos maxilares evaluados, fue observado por lo menos un septo en 163 senos (45,4 %). Generalmente la región anterior fue la más prevalente. Sin embargo, cuando fueron considerados los grupos etarios, solamente la región anterior fue la más prevalente en los grupos 2 y 3. Las regiones media y posterior fueron las más prevalente en los grupos 4 y 1, respectivamente. La prevalencia del septo del seno maxilar en pacientes que son candidatos a tratamiento con implantes dentales fue notablemente alta. Se observó que la región anterior fue la más prevalente siendo las secciones axiales las más representativas.

Abstract To calculate root canal volume and surface area in microCT images, an image segmentation by selecting threshold values is required, which can be determined by visual or automatic methods. Visual determination is influenced by the operator's visual acuity, while the automatic method is done entirely by computer algorithms. Objective: To compare between visual and automatic segmentation, and to determine the influence of the operator's visual acuity on the reproducibility of root canal volume and area measurements. Material and methods: Images from 31 extracted human anterior teeth were scanned with a μCT scanner. Three experienced examiners performed visual image segmentation, and threshold values were recorded. Automatic segmentation was done using the “Automatic Threshold Tool” available in the dedicated software provided by the scanner's manufacturer. Volume and area measurements were performed using the threshold values determined both visually and automatically. Results: The paired Student's t-test showed no significant difference between visual and automatic segmentation methods regarding root canal volume measurements (p=0.93) and root canal surface (p=0.79). Conclusion: Although visual and automatic segmentation methods can be used to determine the threshold and calculate root canal volume and surface, the automatic method may be the most suitable for ensuring the reproducibility of threshold determination.

Resumo Com este relato de caso clínico objetiva-se enfatizar a contribuição das ferramentas de pós-processamento aplicadas às imagens de tomografia computadorizada de feixe cônico (TCFC) no diagnóstico, acompanhamento e decisão do tratamento de reabsorção cervical invasiva (ICR). Paciente do sexo feminino, com 16 anos de idade foi encaminhada para realização de radiografia periapical e foi observada radiolucência irregular, na raiz do incisivo central inferior direito. A TCFC foi realizada no intuito de se obter diagnóstico diferencial entre ICR e reabsorção radicular interna. Após o diagnóstico de ICR, o paciente foi orientado a retornar em breve, mas o fez somente seis anos mais tarde. Fez-se assim outra tomografia e registro e subtração foram realizados para documentar a progressão da lesão. Essas ferramentas foram capazes de revelar claramente o progresso da lesão, sua real extensão e foram fundamentais para o diagnóstico diferencial e decisão de tratamento.

Abstract This case report aimed to highlight the usefulness of cone beam computed tomography (CBCT) and its post-processing tools for the diagnosis, follow-up and treatment planning of invasive cervical resorption (ICR). A 16-year-old female patient was referred for periapical radiographic examination, which revealed an irregular but well demarcated radiolucency in the mandibular right central incisor. In addition, CBCT scanning was performed to distinguish between ICR and internal root resorption. After the diagnosis of ICR, the patient was advised to return shortly but did so only six years later. At that time, another CBCT scan was performed and CBCT registration and subtraction were done to document lesion progress. These imaging tools were able to show lesion progress and extent clearly and were fundamental for differential diagnosis and treatment decision.

ABSTRACT The use of natural substances and micronutritional approaches has been suggested as a therapeutic alternative to benefit the bone healing associated with no side effects. Nevertheless, the influence of micronutritional interventions with therapeutic proprieties on the bone repair has yet to be intensely evaluated, and no evidence is available exploring the impact of micronutrient supplementation on the peri-implant bone healing. Objective This study investigated the effect of micronutrients supplementation on the bone repair around implants. Material and Methods One screw-shaped titanium implant was inserted in each tibia of each rat, which were assigned to: daily administration, for 30 d, of the placebo solution (Placebo group-n:18) or micronutrients supplementation (Micronutrients group-n:18), based on calcium, magnesium, zinc, and vitamin D3 intake. After, the animals were sacrificed. One of the implants was removed by applying a counter-torque force to evaluate the force to rupture the bone-implant interface. The other implant was evaluated by microcomputed tomography (CT) examination to determine the bone-to-implant contact (BIC) and the bone volume (BV/TV). Results No statistically significant differences were observed between the groups for both counter-torque values and microCT parameters (p>0.05). Conclusion Within the limits of this study, micronutrients supplementation did not provide additional benefits to the bone healing around dental implants.

There is now wide acceptance in medicine and dentistry that clinical practice should be as "evidence-based" as possible. Which is why many works have been published aimed at reducing radiation doses in different types of imaging modalities in dentistry, and that the major effect of radiation especially in children requires us to take necessary steps to rationalize their use especially the Cone Beam Computed Tomography (CBCT) method that provides the highest doses in dentistry. This review was written using this approach because of the purpose of streamlining the radiation dose in our patients. SEDENTEXCT team collected and analyzed relevant publications in the literature, guidelines that have proven effective in the past to reach recommendations, which can contribute to optimizing the use of ionizing radiation in dentistry, helping to see with others eyes the dose received by our patients. This paper recommend to consider the SEDENTEXCT project to prescribe more appropriately complementary exams we use daily

En la actualidad existe una gran aceptación por la medicina y la odontología, en que la práctica clínica debe ser "basada en evidencia científica", tanto como sea posible. Es por eso que múltiples trabajos se han publicado orientados a disminuirlas dosis de radiación en los diferentes tipos de modalidades imaginológicas usados en la odontología, ya que el mayor efecto de las radiaciones, sobre todo en niños, nos obliga a tomar medidas necesarias para racionalizar su uso, especialmente con la tomografía computarizada Cone Beam (TCCB), método que aporta las mayores dosis en la odontología. Esta revisión fue escrita utilizando un enfoque de este tipo con el propósito de racionalizar la dosis de radiación en nuestros pacientes. El equipo del proyecto SEDENTEXCT recopiló y analizó relevantes publicaciones en la literatura, pautas que han demostrado su eficacia en el pasado, para llegar a formular recomendaciones que contribuyan a la optimización del uso de las radiaciones ionizantes enla odontología, ayudando de esa manera a ver con otros ojos la dosis recibida por los pacientes, y con la presente se recomienda tener en cuenta dicho documento para poder prescribir de manera más adecuada los exámenes complementarios que usamos diariamente.

O objetivo deste trabalho foi avaliar o efeito de monômeros de baixa contração de polimerização nas propriedades físico-químicas de resinas compostas. Duas resinas de baixa contração de polimerização com monômeros do tipo crosslink (Kalore GC Corp) ou do tipo novelar (Venus Diamond Heraeus Kulzer) foram comparadas a uma resina composta convencional (Filtek Z250 3M/ESPE). A contração de polimerização foi avaliada através da análise por µCT (n=5) e as propriedades físico-químicas através da análise do grau de conversão C=C (GC) resistência flexural (RF) e módulo de Young (MY) (n=10). Todas as amostras foram fotoativadas com uma fonte de LED (Radii SDI) com 16 J/cm2. Todos os resultados foram submetidos aos testes de análise de variância de 1 fator e ao teste de Tukey para comparações múltiplas (α=0,05). Nenhuma diferença estatística foi encontrada para os valores de contração de polimerização para Kalore (1,8 %) e Venus Diamond (1,7 %) (p≥0,05). Z250 apresentou estatisticamente maior contração de polimerização (2,0%). Kalore apresentou estatisticamente maior GC (60,8%) que Venus Diamond (49,5%) e Z250 (49,6%). Nenhuma diferença estatística foi encontrada para as propriedades RF e MY entre Venus Diamond e Z250. Kalore apresentou os menores valores estatisticos para FS e MY (p≥0,05). O monômero novelar parece reduzir a contração de polimerização sem afetar as propriedades físico-químicas avaliadas das resinas compostas de forma mais adequada que a utilização de monômeros do tipo crosslinker.

The aim of this study was to evaluate the effect of low shrinkage monomers on physicochemical properties of dental resin composites. Two low shrinkage resin composites: one with a crosslink branching monomer (Kalore, GC Corp) and a novel monomer (Venus Diamond, Heraeus Kulzer) were compared to a conventional resin composite formulation (Filtek Z250, 3M/ESPE). The volumetric shrinkage was evaluated by µCT analysis (n=5) and the physicochemical properties by degree of C=C conversion (DC), flexural strength (FS) and Young's modulus (YM) (n=10). All samples were light cured by a LED device (Radii, SDI) with 16 J/cm2. The results were analysed by one-way ANOVA and Tukey test for multiple comparisons (α=0.05). No statistical difference was found between µCT shrinkage values to Kalore (1.8%) and Venus Diamond (1.7%) (p≥0.05); Z250 presented statistical highest shrinkage value (2.0%). Kalore presented higher statistical DC (60.8%) than Venus Diamond (49.5%) and Z250 (49.6%). No statistical difference was found between FS or YM properties to Venus Diamond and Z250; Kalore presented statistical lowest FS and YM properties (p≥0.05). Conclusion: Using novel monomers seem to reduce polymerization shrinkage without affecting the physicochemical properties evaluated of resin composites rather than using crosslink branching monomers.