Resumo Pacientes submetidos a tratamento radioterápico apresentam maior suscetibilidade à cárie dentária e o uso de aparelho aumenta esse fator de risco devido ao acúmulo de biofilme dental ao redor dos bráquetes. Assim, o objetivo deste estudo foi avaliar a resistência ao cisalhamento de bráquetes ortodônticos colados com cimento de ionômero de vidro convencional (CIV) e o modificado por resina (CIVMR), devido à capacidade de liberação de flúor desse material em dentes permanentes irradiados. Noventa pré-molares humanos foram divididos em 6 grupos (n=15), de acordo com o materila de colagem e com o uso ou não de radiação: RC: Transbond XT; CIVMR: Fuji Ortho LC; RMGIC: Ketac Cem Easymix. Os grupos for irradiados (I) ou não-irradiados (NI) previamente à colagem dos bráquetes. Os espécimes foram submetidos a doses fracionadas de radiação de 2 Gy/dia, durante 5 dias consecutivos, por 6 semanas. Depois da termociclagem e radioterapia, os bráquetes foram colados sobre os espécimes com Transbond XT, Fuji Ortho LC e Ketac Cem Easymix. Depois de 24 h, os espécimes foram sumetidos ao teste de resistência ao cisalhamento. A imagem da superfície do esmalte (classificado pelo Índice de Remanescente Adesivo-IRA) também foi avaliada. O IRA foi distribuido em tabelas de contingência e analisado quanto à frequência entre grupos/subgrupos. O teste de resistência ao cisalhamento foi avaliado por ANOVA e pós-teste de Tukey. CIVMR apresentou os menores valores de adesão entre os grupos (p<0,05). Entre os grupos irradiados e não-irradiados não houve diferença estatística significante (p>0,05). Quanto ao IRA, RC-I apresentou maior retenção de compósito na superfície do esmalte do que os demais subgrupos. CIVMR pode ser utilizado para colagem de bráquetes metálico e apresentou IRA aceitável para práticas clínicas.

Abstract Patients undergoing radiotherapy treatment present more susceptibility to dental caries and the use of an orthodontic device increases this risk factor due to biofilm accumulation around the brackets. The objective of this study was to evaluate the shear bond strength to irradiated permanent teeth of orthodontic brackets bonded with conventional glass ionomer cement and resin-modified glass ionomer cement due to the fluoride release capacity of these materials. Ninety prepared human premolars were divided into 6 groups (n=15), according to the bonding material and use or not of radiation: CR: Transbond XT composite resin; RMGIC: Fuji Ortho LC conventional glass ionomer cement; GIC: Ketac Cem Easymix resin-modified glass ionomer cement. The groups were irradiated (I) or non-irradiated (NI) prior to bracket bonding. The specimens were subjected to a fractioned radiation dose of 2 Gy over 5 consecutive days for 6 weeks. After the radiotherapy, the brackets were bonded on the specimens with Transbond XT, Fuji Ortho LC and Ketac Cem Easymix. After 24 h, the specimens were subjected to shear bond strength test. The image of enamel surface (classified by Adhesive Remnant Index - ARI) was also evaluated and its frequency was checked among groups/subgroups. The shear bond strength variable was evaluated with ANOVA and Tukey’s post-hoc test. GIC group showed the lowest adhesion values among the groups (p<0.05). There was no statistically significant difference among non-irradiated and irradiated groups (p>0.05). As for the ARI, the CR-I group showed the highest material retention on enamel surface among the irradiated groups. RMGIC group showed the highest values for shear bond strength and presented ARI acceptable for clinical practices.

In this work, the analgesic and anti-inflammatory activities of Zeyheria montana Mart. ethanol leaf extract were investigated at doses of 75, 150 and 300 mg/kg body weight. In the analgesic assay, against a chemical stimulus in mice, acetic acid-induced writhes were significantly inhibited by the extract at doses of 75 mg/kg (67.27%), 150 mg/kg (49.38%) and 300 mg/kg (82.87%). Also, a vigorous decrease in hyperalgesia was observed when measured after 2 h and 6 h of lipopolysaccharide stimulation of rats for all doses of extract tested. Z. montana extract, at doses of 75 and 300 mg/kg, caused very slight central analgesia in rats submitted to thermal stimulus, particularly noticeable at 30 min following treatment. The anti-inflammatory activity of Z. montana extract on carrageenan-induced oedema in rats was evaluated. The oedema development, measured at 180 min following carrageenan intraplantar injection, was significantly reduced by all tested doses: 75 mg/kg (33.30%), 150 mg/kg (45.80%) and 300 mg/kg (75.00%). The LD50 value was greater than 2000 mg/kg. These results demonstrated that the ethanol extract from Z. montana leaf possesses anti-nociceptive and anti-inflammatory activities, which could be of relevance for the pharmacological control of pain and inflammatory processes.

The aim of this study was to analyze the microhardness of two resin-modified glass ionomer cements (Vitremer; Fuji II LC); two polyacid-modified composite resins (Freedom; F2000) and a hybrid composite resin (Prodigy), at different depths from the upper surface. Six hemi-cylinders (3 mm height; 3 mm radius) per tested material were obtained. Vickers Hardness was determined using a micro-indentation tester. For each hemi-cylinder, three indentations were taken at one of the following depths: 0.4, 1.0, 2.0 and 2.6 mm. For each material, microhardness average was calculated. Statistical analysis was performed using two-way ANOVA and Tukey test Fuji II LC and Vitremer showed no statistically significant difference among hardness means recorded at the four analyzed depths. The hybrid and the polyacid-modified composite resins showed significant decrease microhardness with increasing depth. It may be concluded that for the RMGIC, microhardness was not affected at depths up to 2.6 mm. On the other hand, both hybrid and PMCRs should de better placed in increments not thicker than 2 mm to achieve optimal hardness throughout the restoration.

The aim of this in vitro study was to assess the effect of different fluoride-containing mouthrinses on the translucence of resin-modified glass ionomer cements, as a function of the restorative material used, the fluoride-containing solution employed and the time of immersion. Disks were prepared (10 mm × 2 mm) with the modified glass ionomer cements Vitremer (3M) and Fuji II LC (GC Co.), and immersed in three fluoride-containing solutions: Fluordent Reach (Johnson & Johnson), Fluorgard (Colgate-Palmolive) and Oral B (Gillette do Brasil Ltda). Translucence was measured with electrophoresis equipment (JOUAN) after different immersion times. The results obtained were submitted to ANOVA and Tukey's test, and a statistically significant decrease was observed in the translucence of the materials after immersion in the fluoride-containing solutions. Fuji II LC demonstrated the lowest alteration in translucence, independently of the solution employed. Fluorgard was the fluoride-containing mouthrinse that promoted the highest alteration. It can be concluded that the fluoride-containing mouthrinses influenced the translucence of the resin-modified glass ionomer cements.

O propósito deste estudo foi comparar o padrão de microinfiltração em restaurações classe V usando diferentes combinações de cimento ionomérico/resina composta. Cinqüenta cavidades foram preparadas nas superfícies vestibular e lingual de caninos e de pré-molares recém-extraídos. A margem gengival dos preparos estendeu-se até a dentina/cemento, e a margem oclusal localizou-se em esmalte. As cavidades foram restauradas como se segue: cimentos ionoméricos restauradores modificados por componentes resinosos (Fuji II LC e Vitremer); sistema adesivo/resina composta (Scotchbond Multi-Uso/Silux Plus); técnica sanduíche empregando-se o sistema adesivo/resina composta descrito, com um cimento ionomérico forrador (Vitrebond e GC Lining LC). Os espécimes foram armazenados em água destilada, polidos, submetidos à ciclagem térmica e imersos em fucsina. A extensão de penetração do corante foi classificada segundo o critério de escores, e os dados foram analisados estatisticamente, não sendo observadas diferenças significativas tanto entre materiais como entre margens.

The purpose of this study was to compare the microleakage of class V restorations using different combinations of glass ionomer/composite resin. Fifty cavities were prepared on the buccal and lingual aspects of recently extracted premolars and canines. The gingival margins of the preparations were extended into the cementum, and the occlusal margins were kept at the enamel level. The teeth were then divided into five groups and restored as follows: resin-modified glass ionomer cement restorative materials (Fuji II LC and Vitremer); composite resin/adhesive system (Scotchbond Multipurpose/Silux Plus); sandwich technique using the same composite resin/adhesive system and a resin-modified glass ionomer cement liner material (Vitrebond and GC Lining LC). The teeth were stored in distilled water, finished and thermocycled prior to immersion in a 2% basic fuchsin solution. The depth of dye penetration was scored and the results analyzed using Kruskal-Wallis and Wilcoxon Tests. The results revealed no significant differences between any of the groups for both cervical and occlusal margins.