ABSTRACT Objective: To evaluate the association of oral health-related quality of life (OHRQoL) with the longevity of ART-restorations in children after 18 months. Material and Methods: A longitudinal clinical study with 62 six- to seven-year-old children, both genders, 31 of whom underwent four weeks of oral health education strategy (OHES) followed by ART (GOHES+ART) and the others only ART (GART). The Brazilian short-version of the Child Perceptions Questionnaire (16-CPQ8-10) was used to evaluate the OHRQoL and the perception of change in oral health was assessed by a single question. Data was analyzed using Mann-Whitney, Wilcoxon and Friedman's tests. Results: After 18 months, GOHES+ART reported a greater impairment on OHRQoL, mainly in oral symptoms domain (p<0.05). In this period, greater impairment of oral symptoms was reported in children with failed restorations and with treatment considered to have a minor failure (p<0.05). In inter-group analysis, the GOHES+ART, with 2 to 4 restorations, Class I, of small size, located in the upper arch and with a smaller failure, reported more oral symptoms than the GART. Conclusion: In the long-term, children submitted to OHES followed by ART reported more oral symptoms. Factors such as number, class, size and location of the restorations need to be considered for the implementation of an efficient and effective oral health program, as well as for greater longevity of ART-restorations.

Abstract Objective: To assess the incidence of caries in a two-year period among low birth weight (LBW), very low birth weight (VLBW), and extremely low birth weight (ELBW) children considering socioeconomic indicators, dietary factors and oral hygiene. Material and Methods: A convenience sample was formed of 42 low birth weight children aged two to five years at baseline. Two examiners diagnosed caries using the World Health Organization criteria. Birth weight, socioeconomic indicators and diet were collected from medical records and questionnaires. Binomial models were used to estimate unadjusted and adjusted rate ratios (RR) and respective 95% confidence intervals for the factors evaluated. Results: Thirty-six children were re-examined after two years. The incidence of dental caries was 36.7%. The dmft index was 0.44 (±1.25) at baseline and increased to 1.36 (±3.85) at follow-up. VLBW children (1,000 to 1,500 g) (RR=0.23; 95%CI: 0.08-0.72) and LBW children (1,500 to 2,500 g) (RR=0.06; 0.01-0.55) had fewer carious lesions compared to ELBW children (<1,000 g). Carious lesions were more frequent among children with a lower income (RR=6.05; 1.05-34.84) and less frequent among those who did not consume sweetened juice, tea or yogurt (RR: 0.21; 0.07-0.62). Conclusion: An inverse dose-response relation was found between birth weight and the incidence of caries. A lower income and the consumption of sweetened beverages were risk factors for the development of caries.

Resumo Introdução A microabrasão do esmalte é realizada através da abrasão da superfície do mesmo, apresentando-se como um procedimento rápido, prático e eficiente. Objetivo Avaliar a perda de peso e o aspecto superficial do esmalte após procedimentos de microabrasão com agentes comerciais e não comerciais. Material e método Oitenta incisivos bovinos foram divididos em quatro grupos (n = 10): OpalustreTM (6,6% HCl + carboneto de silício); Whiteness RMTM (6% HCl + carboneto de silício); 37% H3PO4 + pedra-pomes e 10% HCl + pedra-pomes. O tratamento foi realizado em 15 aplicações de 10s de duração. A perda de peso do esmalte foi determinada pela diferença de peso antes e depois da microabrasão. As superfícies foram analisadas por equipamento de rugosidade superficial e microscopia eletrônica de varredura. Os dados foram submetidos ao teste T-pareado, ANOVA one-way e teste de Tukey (α = 0,05). Resultado Foi observada perda de peso significativa para todos os grupos, a diferença na perda de peso variou de -0,037±0,012 para o grupo 37% H3PO4 a -0.054±0.009 para o grupo 6.6% HCl. Houve um aumento significativo na rugosidade da superfície para todos os grupos e o grupo 10%HCl apresentou os resultados mais baixos (0,65±0,09). Foram observados diferentes padrões de morfologia do esmalte por meio de imagens MEV. Conclusão Os agentes não comerciais resultaram na menor perda de estrutura do esmalte (37% H3PO4) e na rugosidade superficial (10% HCl).

Abstract Introduction Enamel microabrasion is achieved by abrasion of the enamel surface and it is a quick, practical and efficient procedure. Objective It was assessed the weight loss and surface aspect of enamel after microabrasion procedures with commercial and mixtures made in-office. Material and method Eighty bovine incisors were divided into four groups (n=10): OpalustreTM (6.6% HCl + silicon carbide); Whiteness RMTM (6% HCl + silicon carbide); 37% H3PO4 + pumice and 10% HCl + pumice. Treatment was performed by 15 applications of 10s duration. The enamel weight loss was determined by the difference in weight before and after the microabrasion. The surfaces were analyzed by a surface roughness equipment and scanning electron microscopy. Data were submitted to paired-T test, one-way ANOVA and Tukey tests (α=0.05). Result It was observed significantly weight loss for all groups. The difference in weight loss ranged from 0.037±0.012 for group 37% H3PO4 and from 0.054±0.009 for group 6,6% HCl. There was a significant increase in surface roughness for all groups and 10% HCl group showed the lower results (0.65±0.09). It was observed different patterns of enamel morphology by SEM images. Conclusion The in-office mixtures resulted in the lowest enamel structure loss (37% H3PO4) and the lowest surface roughness (10% HCl).

Abstract Objective Our study aims to synthesize, characterize, and determine the effects of a ChNPs suspension on human enamel after cariogenic challenge via pH-cycling. Methodology ChNPs were synthesized by ion gelation and characterized by Transmission Electron Microscopy (TEM) and Dynamic Light Scattering. Forty enamel blocks were divided into four groups (n=10/group): (i) ChNPs suspension; (ii) chitosan solution; (iii) 0.05% sodium fluoride (NaF) solution; and (iv) distilled water. Specimens were exposed to cariogenic challenge by cycling in demineralization solution (3 h) and then remineralized (21h) for 7 days. Before each demineralization cycle, the corresponding solutions were passively applied for 90 s. After 7 days, specimens were examined for surface roughness (Ra) and Knoop hardness (KHN) before and after the cariogenic challenge; % KHN change (variation between initial and final hardness), and surface topography by an optical profilometer. The data were analyzed by repeated-measures ANOVA, One-way ANOVA, and Tukey tests (α=0.05). Results TEM images showed small spherical particles with diameter and zeta potential values of 79.3 nm and +47.9 mV, respectively. After the challenge, all groups showed an increase in Ra and a decrease in KHN values. Optical profilometry indicated that ChNPs- and NaF-treated specimens showed uneven roughness interspersed with smooth areas and the lowest %KHN values. Conclusion The ChNPs suspension was successfully synthesized and minimized human enamel demineralization after a cariogenic challenge, showing an interesting potential for use as an oral formulation for caries prevention.

Abstract Objective: To evaluate the effect of immersion and acid challenge with cola drink on color change (ΔE), Vickers hardness (VHN) and surface roughness (Ra) of artificial acrylic resin teeth. Material and Methods: The artificial teeth were divided into 6 groups (n= 8): TC (Trilux/Control), BC (Biotone/Control), TAC (Trilux/Acid challenge), BAC (Biotone/Acid challenge), TI (Trilux/Immersion) and BI (Biotone/Immersion). The teeth were embedded in acrylic resin and the labial side was serially polished to provide appropriate flat surface. The samples of TC, BC, TI, BI groups were immersed in artificial saliva and cola drink (coke) for 7 days, respectively. The acid challenge was performed with immersion of samples in coke for 5 min, and subsequently immersion in artificial saliva for 2h. This cycle was repeated at 4 times/day, during 7 days. The tests of VHN, ΔE and Ra were analyzed before and after the challenge and immersion groups. Data was analyzed by ANOVA, Tukey and T test (α = 0.05). Results: There was no difference in Ra values between groups after treatments. However, there was a decrease in VHN for all groups. BI (19.2 ± 0.3) presented significantly lower hardness than BAC (19.5 ± 0.9) and BC (20.2 ± 0.5). Groups BI (2.18 ± 0.41) and TI (1.50 ± 0.43) had statistically higher ΔE compared to the other groups. Conclusion: The hardness of resin teeth decreased after acid challenges, but the roughness surface was not affected. The color was more affected by the times of exposure in cola beverage and remineralization in artificial saliva, which were associated to the material degradation.

Abstract The effect of fluoride agents on the retention of orthodontic brackets to enamel under erosive challenge is little investigated. Objective: The aim of this study was to evaluate the effect of titanium tetrafluoride (TiF4) and sodium fluoride (NaF) agents on the shear bond strength of brackets to enamel and on the enamel microhardness around brackets under erosive challenge. Methods: Brackets were bonded to bovine incisors. Five groups were formed according to fluoride application (n=10): TiF4 varnish, TiF4 solution, NaF varnish, NaF solution and control (without application). The specimens were submitted to erosive challenge (90 s cola drink/2h artificial saliva, 4x per day for 7 days). Solutions were applied before each erosive cycle and varnishes were applied once. Vickers Microhardness (VHN) was obtained before and after all cycles of erosion and the percentage of microhardness loss was calculated. Shear bond strength, adhesive remnant index and polarized light microscopy were conducted after erosion. The data were analyzed by ANOVA, Tukey, Kruskal-Wallis and Mann-Whitney U tests (α=0.05). Results: The %VHN had no statistically significant differences among the experimental groups. However, considering the comparisons of all groups with the control group, TiF4 varnish showed the highest protection from enamel demineralization (effect size of 2.94, while the effect size for the other groups was >2.4). The TiF4 varnish group had significantly higher shear bond strength compared to other groups. There was no difference among groups for adhesive remnant index. Polarized light microscopy showed higher demineralization depth for the control group. Conclusions: Application of NaF and TiF4 agents during mild erosive challenge minimized the enamel mineral loss around brackets, however only the experimental TiF4 varnish was able to prevent the reduction of shear bond strength of brackets to enamel.

Resumo O objetivo neste estudo foi avaliar a resistência de união à microtração (RUµT) de um sistema adesivo convencional (Adper Single Bond 2 - SB) em diferentes substratos dentinários e períodos de armazenagem. Vinte e quatro blocos de dentina foram obtidos de terceiros molares hígidos e separados aleatoriamente em 3 grupos (n=8): dentina sadia (Ds), dentina afetada (Da) e dentina infectada (Di). A Da e a Di foram submetidas ao desenvolvimento biológico artificial de cárie (S. mutans). O tecido cariado amolecido foi removido usando broca esférica sob inspeção visual com a solução Caries Detector (grupo Da). Considerou-se como Di a dentina amolecida e fortemente pigmentada de vermelho e como Da, a dentina hígida e levemente pigmentada de vermelho. O sistema adesivo SB foi aplicado de acordo com as recomendações do fabricante e blocos da resina composta Z350 foram construídos (6 mm de altura). O conjunto (dente/bloco de resina) foi armazenado em água deionizada por 24 horas a 37 °C. Estes foram seccionados em palitos (1,0 mm2 de área), que foram separados aleatoriamente em 3 períodos de armazenagem: 24 horas, 6 meses e 1 ano. Os palitos foram submetidos ao ensaio de resistência de união à microtração na máquina EZ teste a uma velocidade de 1,0 mm/min. Dados de RUµT foram submetidos à Análise de Variância 2 fatores em esquema de parcela subdividida e ao teste de Tukey (a=0,05). Os valores de resistência (MPa) da Ds (41,2) foram significativamente maiores do que os da Da (32,4) e Di (27,2), independente do tempo de armazenagem. Di e Da, 6 meses e 1ano, apresentaram valores similares de resistência de união. As falhas adesivas e mistas foram predominantes para todos os grupos. Em conclusão, os maiores valores de RUµT (48,1±9,1) foram verificados para a Ds e 24 h de armazenagem. A armazenagem diminuiu os valores de RUµT para todas as condições.

Abstract The aim of this study was to evaluate the μTBS in different dentin substrates and water-storage periods. Twenty-four dentin blocks obtained from sound third molars were randomly divided into 3 groups: Sound dentin (Sd), Caries-affected dentin (Ca) and Caries-infected dentin (Ci). Dentin blocks from Ca and Ci groups were subjected to artificial caries development (S. mutans biofilm). The softest carious tissue was removed using spherical drills under visual inspection with Caries Detector solution (Ca group). It was considered as Ci (softer and deeply red stained dentin) and Ca (harder and slightly red stained dentin). The Adper Single Bond 2 adhesive system was applied and Z350 composite blocks were built in all groups. Teeth were stored in deionized water for 24 h at 37 ºC and sectioned into beams (1.0 mm2 section area). The beams from each tooth were randomly divided into three storages periods: 24 h, 6 months or 1 year. Specimens were submitted to µTBS using EZ test machine at a crosshead speed of 1.0 mm/min. Failure mode was examined by SEM. Data from µTBS were submitted to split plot two-way ANOVA and Tukey’s HSD tests (a=0.05). The µTBS (MPa) of Sd (41.2) was significantly higher than Ca (32.4) and Ci (27.2), regardless of storage. Ca and Ci after 6 months and 1 year, presented similar µTBS. Mixed and adhesive failures predominated in all groups. The highest µTBS values (48.1±9.1) were found for Sd at 24 h storage. Storage of specimens decreased the µTBS values for all conditions.

Resumo Introdução Os métodos de descontaminação ou desinfecção de escovas dentais têm sido questionados. Objetivo Este estudo avaliou a eficácia da infusão de cascas de romã como um desinfetante de escovas dentais contra Streptococcus mutans. Material e método Uma amostra de 16 escolares com idade entre 7 e 9 anos realizou escovação dentária cuidadosa, uma vez ao dia por 5 dias/semana durante 4 semanas. Após cada dia de escovação, as escovas foram lavadas e pulverizadas com uma solução desinfetante. Este procedimento foi repetido por 4 semanas utilizando uma das diferentes soluções por semana: água destilada (G1; grupo controle), infusão de casca de romã (Punica granatum Linn) (G2), hipoclorito de sódio a 1% (G3) e digluconato de clorexidina a 0,12% (G4). Após o quinto dia, as escovas foram coletadas para análise laboratorial. As cabeças das escovas foram agitadas em solução salina diluída em 10–1, 10–2,10–3, e 25μL de cada diluição foi semeada em meio de cultura agar mitis salivarius para contagem de unidade formadora de colônias (UFC) de S. mutans. Um examinador calibrado (Kappa = 0,91) realizou a contagem de UFC mL–1 × 104. Os testes de Kruskal-Wallis e de Comparações Múltiplas de Dunn foram usados em um nível de significância de 5%. Resultado G1 apresentou o maior número de UFC (3,9 ± 8,4), seguido de G2 (3,2 ± 4,0). Não foi observado crescimento de S. mutans em G3 e G4. Não houve diferença estatisticamente significante entre G1 e G2 e entre G3 e G4 (p>0,05). Conclusão A infusão de romã foi completamente ineficaz para a desinfecção de escovas dentais contra S. mutans quando comparada às soluções de hipoclorito de sódio a 1% e digluconato de clorexidina a 0,12%.

Abstract Introduction Methods of decontamination or sanitization of toothbrushes have been questioned. Objective This study assessed the effectiveness of pomegranate peels infusion as a disinfectant of toothbrushes against Streptococcus mutans. Material and method A sample of 16 schoolchildren aged between 7 and 9 years performed brushing 5 days/week, with a careful brushing once a day. After each day of brushing, the toothbrushes were washed and sprayed with one disinfectant solution. This procedure was repeated for 4 weeks using one of the different solutions per week: distilled water (G1; negative control), pomegranate (Punica granatum Linn) peels infusion (G2), 1% sodium hypochlorite (G3) and 0.12% chlorhexidine digluconate (G4). After the fifth day, toothbrushes were collected for laboratory analysis. Toothbrushes heads were subjected to agitation in saline dilution of 10–1, 10–2,10–3, and 25 μL of each dilution were seeded in mitis salivarius agar culture medium for S. mutans colony-forming unit (CFU) counting. One calibrated examiner (Kappa = 0.91) performed the CFU (mL–1 × 104) counts. Kruskal-Wallis and Dunn Multiple Comparison tests were used at a significance level of 5%. Result G1 presented the highest number of CFU (3.9 ± 8.4), followed by G2 (3.2 ± 4.0). No S. mutans growth was observed in G3 and G4. There was no statistically significant difference between G1 and G2 and between G3 and G4 (p>0.05). Conclusion Pomegranate infusion was completely ineffective for the disinfection of toothbrushes against S. mutans when compared with 1% sodium hypochlorite and 0.12% chlorhexidine digluconate solutions.

Resumo Introdução Poucos estudos investigaram as propriedades de superfície de cimentos após desafio erosivo. Objetivo Avaliar a rugosidade da superfície (Ra), dureza Vickers (VHN) e morfologia de superfície de 4 cimentos após desafio erosivo. Material e método Vinte amostras de cada cimento foram preparadas (4×2mm) e divididas em grupo experimental (desafio erosivo) e controle (saliva artificial) (n=10): Rely X U200 (U200); Rely X ARC (ARC); Ketac Cem Easy Mix (Ketac) e Fosfato de Zinco (ZnP). O desafio erosivo foi realizado com quatro ciclos erosivos diárias (90s) em bebida à base de cola e 2h em saliva artificial durante 7 dias. As leituras de Ra e VHN foram realizadas antes e após erosão. A porcentagem de perda de dureza (%VHN) foi obtida depois da erosão. A morfologia de superfície foi analisada por microscopia eletrônica de varredura (MEV). Foram utilizados testes de ANOVA, Tukey e T-Student (α=0,05). Resultado Após a erosão, foi observado aumento dos valores de Ra em todos os cimentos testados, e os grupos U200 e ZNP tiveram a maior %VHN. Após imersão em saliva, apenas os grupos U200 e ZnP tiveram aumento significativo nos valores de Ra e não houve diferenças significativas entre os grupos quanto à %VHN. A análise em MEV mostrou que os grupos Ketac e ZNP apresentaram superfícies rugosas e porosas, e o grupo U200 apresentou maior degradação da matriz comparado ao grupo ARC. Conclusão O desafio erosivo com bebida a base de cola afetou as propriedades de superfície de todos os cimentos.

Abstract Introduction Few studies investigated the surface properties of luting cements after erosive challenge. Objective To evaluate the surface roughness (Ra), Vickers hardness (VHN) and morphology of 4 luting cements after erosive challenge. Material and method Twenty specimens of each cement were prepared (4×2mm) and divided into experimental (erosive challenge) and control (artificial saliva) groups (n=10): Rely X U200 (U200); Rely X ARC (ARC); Ketac Cem Easy Mix (Ketac) and Zinc phosphate (ZnP). The erosive challenge was performed by four daily erosive cycles (90s) in a cola drink and 2 h in artificial saliva over 7 days. Ra and VHN readings were performed before and after erosion. The percentage of hardness loss (%VHN) was obtained after erosion. The surface morphology was analyzed by scanning electron microscopy (SEM). ANOVA, Tukey and Student-T tests were used (α=0.05). Result After erosion, all luting cements had increase in Ra values and U200 and ZnP groups had the highest %VHN. After saliva immersion, only U200 and ZnP groups had significant increases in Ra values and there were no significant differences among the groups in %VHN. SEM analysis showed that Ketac and ZnP groups had rough and porous surfaces, and U200 group had higher resin matrix degradation than ARC group. Conclusion Erosive challenge with a cola drink affected the surface properties of all luting cements.

Abstract The layer formed by fluoride compounds on tooth surface is important to protect the underlying enamel from erosion. However, there is no investigation into the properties of protective layer formed by NaF and TiF4 varnishes on eroded enamel. This study aimed to evaluate the thickness, topography, nanohardness, and elastic modulus of the protective layer formed by NaF and TiF4 varnishes on enamel after erosion using nanoindentation and atomic force microscopy (AFM). Human enamel specimens were sorted into control, NaF, and TiF4 varnish groups (n = 10). The initial nanohardness and elastic modulus values were obtained and varnishes were applied to the enamel and submitted to erosive challenge (10 cycles: 5 s cola drink/5 s artificial saliva). Thereafter, nanohardness and elastic modulus were measured. Both topography and thickness were evaluated by AFM. The data were subjected to ANOVA, Tukey’s test and Student’s t test (α = 0.05). After erosion, TiF4 showed a thicker protective layer compared to the NaF group and nanohardness and elastic modulus values were significantly lower than those of the control group. It was not possible to measure nanohardness and elastic modulus in the NaF group due to the thin protective layer formed. AFM showed globular deposits, which completely covered the eroded surface in the TiF4 group. After erosive challenge, the protective layer formed by TiF4 varnish showed significant properties and it was thicker than the layer formed by NaF varnish.

Abstract Aim: To assess in vitro the surface roughness (Ra), Vickers hardness (VHN) and surface morphology of resin and glass ionomer materials used for sealants after dynamic erosive challenge. Methods: Twenty specimens of each material were prepared and divided into experimental (erosive challenge) and control groups (n=10): Protect Riva (SDI), Opallis Flow (3M ESPE), Fluroshield (Dentsply), Filtek Z350 XT Flow (3M ESPE). The erosive challenge was performed 4 times per day (90 s) in cola drink and for 2 h in artificial saliva for 7 days. The control specimens were maintained in artificial saliva. Ra and VHN readings were performed before and after erosion. The percentage of hardness loss (%VHN) was obtained after erosion. The surface morphology was evaluated by scanning electron microscopy (SEM). The data were analyzed by ANOVA, Tukey and paired t tests (α=0.05). Results: After erosion and saliva immersion, there was an increase in Ra values for all groups and Riva group showed the highest Ra values. After erosive challenge, Riva and Filtek groups showed significant decrease in VHN values, but Filtek group showed the greatest %VHN. For all groups there was inorganic particle protrusion and matrix degradation after erosion visualized by SEM images. Conclusions: Erosive challenge affected the surface properties of all materials used as sealants, particularly in the Riva and Filtek groups.

Oral side effects must be expected during cancer treatment on pediatric patients. Monitoring side effects on oral cavity of antineoplastic therapy is desirable but sometimes performed without criteria. The purpose of this article is to describe an oral monitoring in an male with Hodgkin lymphoma during chemotherapy treatment using an Oral Assessment Guide. An 11-yr-old male was assisted during all treatment of chemotherapy against Hodgkin's lymphoma in the dental sector of a hospital of reference of João Pessoa, Paraíba, Brazil. The Oral Assessment Guide was applied by a calibrate examiner and was observed the emergence of ulcerative lesions on the labial mucosa emerged on two different periods (D15- primary cycle; D15-second cycle) and the major values of oral mucositis were verified in D1 e D15 periods of second cycle of chemotherapy. Monitoring oral side effects during antineoplastic therapy could prevent severe oral complications and avoid to associate systemic complications.

Los efectos secundarios orales se manifiestan durante el tratamiento del cáncer en los pacientes pediátricos. El monitoreo de los efectos secundarios en la cavidad oral de la terapia antineoplásica es deseable, pero a veces se realiza sin criterios. El propósito de este artículo es describir un monitoreo oral en un niño con linfoma de Hodgkin durante el tratamiento de quimioterapia, empleando una guía de evaluación oral. Un niño de 11 años de edad fue asistido durante todo el tratamiento de quimioterapia contra un linfoma de Hodgkin en el sector odontológico de un hospital de referencia de João Pessoa, Paraíba, Brasil. La guía de evaluación oral fue aplicada por un examinador calibrado. Se observó la aparición de lesiones ulcerosas en la mucosa labial que aparecieron en dos períodos diferentes (D15- primer ciclo; D15-segundo ciclo) y los valores más altos de la mucositis oral se verificaron en períodos D1 e D15 del segundo ciclo de quimioterapia. El seguimiento de los efectos secundarios orales durante la terapia antineoplásica podría prevenir las complicaciones orales graves y evitar complicaciones sistémicas asociadas.

The purpose of this study was to evaluate the inflammatory and cure events of acid-based reactions using glass ionomer cement used for cementation of crowns, bridges, onlays and orthodontic bands implanted in subcutaneous tissue, at different time intervals. A total of 48 male Wistar rats were used, distributed into 4 groups (n = 12), as follows: Group C (control, polyethylene), Group ME (Meron), Group KC (Ketac Cem) and Group PR (Precedent). The animals were sacrificed after time intervals of 7, 15 and 30 days, and their tissues were analyzed under an optical microscope for such events as inflammatory infiltrate, edema, necrosis, granulation tissue, multinucleated giant cells, young fibroblasts and collagen. The results was assessed using Kruskal-Wallis and Dunn's tests (p < 0.05). In the initial period, intense inflammatory infiltrate was observed for all the materials with no significant difference among them (p = 0.104). Groups PR and KC showed significant difference in relation to Group C, at 7 days (p = 0.025) and 15 days (p = 0.006). Edema and giant cells were more expressive in Group ME, differing significantly from Groups C (p = 0.023) and KC (p = 0.039), respectively, at 7 days. Group ME showed a statistically significant difference in relation to Groups PR and KC for the presence of young fibroblasts (p = 0.009) and for collagen (p = 0.002), at 7 days. Within the limits of this in vivo study, Precedent and Ketac Cem glass ionomer cements showed better tissue healing with a greater number of fibroblasts and collagen, as compared to Meron.

The aim of this study was to assess the effect of different remineralizing agents on enamel microhardness (KHN) and surface topography after an erosive challenge. Forty-eight human enamel specimens (4 × 4 mm) were randomly assigned to 4 groups: control (no treatment), fluoride varnish, calcium nanophosphate paste and casein phosphopeptide-amorphous calcium phosphate paste (CPP-ACP). Both pastes were applied for 5 minutes, and fluoride varnish, for 24 h. Four daily erosive cycles of 5 minutes of immersion in a cola drink and 2 h in artificial saliva were conducted for 5 days. KHN readings were performed at baseline and after 5 days. The percentage of enamel hardness change (%KHN) was obtained after erosion. The surface topography was evaluated by atomic force microscopy (AFM). The data were tested using ANOVA, Tukey's and paired-T tests (p < 0.05). After an erosive challenge, there was no statistically significant difference between the control (96.8 ± 11.4 KHN / 72.4 ± 3.0 %KHN) and the varnish (91.7 ± 14.1 KHN / 73.4 ± 5.5 %KHN) groups. The nanophosphate group showed lower enamel hardness loss (187.2 ± 27.9 / 49.0 ± 7.9 %KHN), compared with the CPP-ACP group (141.8 ± 16.5 / 60.6 ± 4.0 %KHN), and both were statistically different from the varnish and the control groups. AFM images showed a rough surface for the control and the varnish groups, a non-homogeneous layer with globular irregularities for CPP-ACP, and a thick homogeneous layer for the nanophosphate group. None of the agents provided protection against the development of erosion; however, nanophosphate paste was able to reduce enamel surface softening after the erosive challenge

Este estudo avaliou a influência da técnica de manipulação e método de polimento sobre a resistência à flexão e citotoxicidade de resinas acrílicas. Duas técnicas de manipulação e três métodos de polimento foram usados na fabricação de placas de acrílico que foram divididas em 6 grupos (n=10). Grupos MM, MC e MW: técnica de massa com polimento mecânico, polimento químico e sem polimento, respectivamente; e Grupos SM, SC e SW: técnica de saturação com polimento mecânico, polimento químico e sem polimento, respectivamente. A resistência à flexão foi testada em uma máquina universal de ensaios e o ensaio de citotoxicidade foi realizada utilizando culturas de células (L929) para os períodos de 24 h a 168 h. Dados da resistência à flexão e de citotoxicidade foram avaliados usando ANOVA dois fatores e ANOVA três fatores, respectivamente (α=0,05), seguido pelo teste post hoc de Bonferroni para comparações múltiplas. O efeito das combinações de técnicas de manipulação e métodos de polimento na resistência à flexão mostraram diferenças significativas apenas entre Grupo SC e Grupos MW, MM e MC (p<0,01). A viabilidade celular variou de 51,0% (3,9%) para 87,6% (3,2%) no intervalo de tempo de 24 h, e de 87,8% (5,0%) para 95,7% (3,1%) no intervalo de tempo de 168 h. Com o aumento da viabilidade celular, a partir do terceiro dia (72 h), não houve diferença significativa entre os grupos, exceto entre MM e SC (p<0,01) em 72 h. Em conclusão, a técnica de manipulação e o método de polimento tiveram maior influência sobre a citotoxicidade do que sobre a resistência à flexão.

This study evaluated the influence of the manipulation technique and polishing method on the flexural strength and cytotoxicity of acrylic resins. Two manipulation techniques and three polishing methods were used in the fabrication of acrylic plates that were divided into 6 groups (n=10). Groups MM, MC and MW: mass technique with mechanical polishing, chemical polishing and without polishing, respectively; and Groups SM, SC and SW: Saturation technique with mechanical polishing, chemical polishing and without polishing, respectively). Flexural strength was tested in a universal testing machine and the cytotoxicity assay used cell cultures (L-929) for periods of 24 h to 168 h. Flexural strength and cytotoxicity data were assessed using two-way and three-way ANOVA, respectively (α=0.05), followed by post hoc Bonferroni test for multiple comparisons. The effect of combinations of manipulation techniques and polishing methods on flexural strength showed significant differences only between Group SC and Groups MW, MM and MC (p<0.01). Cell viability ranged from 51% (3.9%) to 87,6% (3.2) in the 24-h time interval, and from 87.8% (5.0) to 95.7% (3.1%) in the 168-h time interval. With the increase of cell viability, from the third day (72 h), there was no significant difference among the groups, except between MM and SC (p<0.01) at 72 h. In conclusion, the manipulation technique and polishing method had more influence on the cytotoxicity than on flexural strength.