ABSTRACT The use of nanotechnology has been growing in the last decade due to its different properties when compared to macro-scale material. In the wood composites area, nanoparticles are used in order to reduce its hygroscopicity and improve its protection against decay. The aim of this work was to evaluate the physical-mechanical performance and heat transfer inside OSB (Oriented Strand Board) produced with pine wood and castor oil (Ricinus communis L.) polyurethane adhesive with addition of zinc oxide nanoparticles in two different percentages (0.25 and 0.50%) and compare them with the control treatment). The tests performed were density, moisture content, swelling in thickness, static bending and screw withdraw, according to European standards. At the end of the tests, a statistical analysis was performed, through the ANOVA test, with a 5% significance level to verify whether there was difference between the means. The properties of the studied panels were not influenced by the addition of nanoparticles, due the small amount of nanoparticles added. In heat transfer, the panels without the addition of nanoparticles reached a higher temperature compared to treatments with nanomaterial, however, none reached the desired temperature of 100°C. The panels produced attended the class 1 of OSB panels, except in swelling in thickness. macroscale macro scale material area decay physicalmechanical physical mechanical Oriented Board Ricinus L. L 0.25 025 0 25 (0.2 0.50% 050 50 treatment. treatment . treatment) density content thickness withdraw standards test 5 means added nanomaterial however 100C C 100 100°C 0.2 02 2 (0. 0.50 05 10 0. (0 0.5 (
RESUMO O uso da nanotecnologia tem sido crescente na última década, devido às suas propriedades diferenciadas quando comparada ao material usado em macro escala. Na indústria de painéis, as nanopartículas são utilizadas com o intuito de reduzir sua higroscopicidade, assim como melhorar as propriedades físico-mecânicas. O objetivo do presente trabalho foi avaliar o desempenho físico-mecânico e a transferência de calor no interior de painéis OSB (Oriented Strand Board) produzidos com madeira de Pinus elliotti Engelm e resina poliuretana à base de óleo de mamona (Ricinus communis L.) com adição de nanopartículas de óxido de zinco em dois diferentes teores (0,25% e 0,50%) e compará-los com o tratamento de controle. As propriedades determinadas foram densidade, teor de umidade, inchamento em espessura, resistência à flexão estática e arrancamento de parafuso, seguindo as orientações de normas europeias. Ao fim dos ensaios, foi realizada a análise estatística, através da ANOVA, com nível de 5% de significância para verificar se houve diferença significativa entre as médias. As propriedades físico-mecânicas dos painéis estudados não foram influenciadas pela adição de nanopartículas nas porcentagens avaliadas, sendo explicada pela diminuta quantidade de nanopartículas adicionadas. Na transferência de calor, os painéis sem adição de nanopartículas alcançaram uma temperatura superior em relação aos tratamentos com nanomaterial, entretanto, nenhum atingiu a temperatura desejada de 100°C. Os painéis produzidos atenderam a classe 1 de painéis OSB, exceto no inchamento em espessura. década escala higroscopicidade físicomecânicas. físicomecânicas físico mecânicas. mecânicas físicomecânico mecânico Oriented Board Ricinus L. L 0,25% 025 0 25 (0,25 0,50% 050 50 comparálos compará los controle densidade umidade espessura parafuso europeias ensaios estatística ANOVA 5 médias avaliadas adicionadas nanomaterial entretanto 100C C 100 100°C 0,25 02 2 (0,2 0,50 05 10 0,2 (0, 0,5 0, (0 (