ABSTRACT Electromagnetic and ultrasonic flowmeters are high precision devices that can measure the water flow in pressurized irrigation networks. In these networks, the inadequate installation distance of flow control valves generates upstream disturbances which will increase measurement errors and reduce the accuracy of the equipment. Therefore, estimating these errors is important to establishing the correct installation distance of the hydraulic accessories and to ensuring the metrological reliability of the flowmeters. This work proposes a numerical study using Computational Fluid Dynamics to evaluate water flow behavior in pipes and estimate measurement errors caused by gate and butterfly valves in installation configurations found at pressurized irrigation networks. The numerical simulations were made for gate (15, 50 and 75 % closed) and butterfly (open and 30º closed) valves installed three and six diameters (3D and 6D) from the flowmeters. The numerical study with three-dimensional simulation allows for evaluating the flow behavior and estimating measurement errors correctly. According to the study, the installation configurations of the gate and butterfly valves change the flow velocity profile at different positions in the pipe, generating both positive and negative measurement errors at both flowmeters. Among the tested configurations, only the butterfly valve installed 3D and 6D from the electromagnetic flowmeter ensured the measurement accuracy required by ISO 4064.

Resumo Para manter a qualidade de medição do consumo de água, é necessário conhecer a metrologia de hidrômetros unijato ao longo do tempo. Conhecer a metrologia desses instrumentos com o tempo permite estabelecer um período de operação metrológica para diferentes vazões. Isso ajudará as empresas de água a otimizar a gestão e a reduzir as perdas econômicas devido ao consumo do volume de água não contabilizado. Neste estudo, a influência do fator tempo sobre o erro de medição de hidrômetros unijato foi analisada com o objetivo de estimar sua deterioração e, com isso, o período de operação metrológica. Conforme as normas 8316 e 4064 da Organização Internacional de Normalização (ISO), foram avaliados em seis abastecimentos 808 hidrômetros de classe metrológica B, com uma faixa de idade de 3,7 a 16,4 anos de uso. O erro de medição foi calculado pela comparação entre o volume de um depósito calibrado e o volume medido pelos hidrômetros, nas vazões de 30, 120, 750 e 1.500 L h-1. O período de operação metrológica dos medidores foi estimado para cada vazão, por meio da relação entre erro de medição e tempo de uso (regressão linear simples). De acordo com os resultados, a maioria dos hidrômetros apresenta erros crescentes de submedição com o tempo, sendo mais pronunciados nas vazões reduzidas e nas condições de funcionamento menos favoráveis. O período de operação metrológica para as vazões de 30, 120, 750 e 1.500 L h-1 é estimado em aproximadamente 3, 8, 14 y 13 anos. Este período de operação, combinado com os padrões de consumo dos usuários, estabelecerá o melhor momento para substituir os hidrômetros.

Abstract To maintain quality measurement of water consumption, it is necessary to know the metrology of single-jet water meters over time. Knowing the accuracy of these instruments over time allows establishing a metrological operation period for different flow rates. This will aid water companies to optimize management and reduce economic losses due to unaccounted water consumption. This study analyzed the influence of time on the measurement error of single-jet water meters to evaluate the deterioration of the equipment and, with that, launch the metrological operation period. According to standards 8316 and 4064 of the International Organization for Standardization (ISO), 808 meters of metrological Class B were evaluated in six water supplies, with age ranges of 3.7 to 16.4 years of use. The measurement error was estimated by comparing the volume measured in a calibrated tank with the volume registered by the meters at flow rates of 30, 120, 750 and 1,500 L h-1. The metrological operation period of the meters was obtained for each flow rate by the relation between error of measurement and time of use (simple linear regression). According to the results, the majority of the equipment presents increasing under-registration errors over time, more pronounced at low flow rates and with less favorable operating conditions. The metrological operation period for flow rates of 30, 120, 750 and 1,500 L h-1 is estimated at approximately 3, 8, 14 and 13 years. This operation period combined with consumption patterns of users will establish the best time to replace the meters.