Abstract Nanoparticles demonstrate an important role in the protection of bioactive compounds from external factors such as temperature, oxygen and light. In this study, poly-ε-caprolactone (PCL) nanoparticles entrapped β-carotene was produced using the nanoprecipitation method. Firstly, was evaluated the lipophilic surfactant effect and carrier agent of the active compound in the nanocapsules formulation. After choosing the most stable formulation, the nanocapsules production was optimized using β-carotene, caprylic/capric triglycerides (CCT) and soybean lecithin. Response surface methodology (RSM) was adopted to evaluate the influence of soy lecithin concentration, volume of CCT and β-carotene concentration in the particle size, zeta potential, polydispersity index (PDI), encapsulation efficiency and recovery. Formulations containing soy lecithin and CCT demonstrated better stability comparing to the other formulations tested. The nanoparticle formulations presented an optimized particle size below 200 nm, PDI lower than 0.1 and encapsulation efficiency above 95%. Based on the results obtained, the optimum conditions to prepare PCL nanocapsules were 0.2160 mg/mL of β-carotene, 232.42 μL of CCT and 2.59 mg/mL of soy lecithin, suggesting an applicability to promote controlled released of β-carotene in food system.

Suspensions of poly ε-caprolactone (PCL) nanoparticles loaded with thyme essential oil were prepared as a natural antioxidant in mayonnaise. Mean particle size was 204.9 ± 2.7 and 240.0 ± 5.5 nm respectively for nanoparticles prepared with PCL alone (NP-C) and for those loaded with thyme essential oil (NP-T). The polydispersity index indicated a homogeneous distribution of all particles, with no significant difference between NP-C and NP-T samples. The nanoparticles showed a large negative charge evidenced by zeta potential rates, indicating high physical stability. The use of PCL as a polymer provided high encapsulation efficiency for thyme essential oil (91.15 ± 2.12 %). DPPH (2,2-diphenyl-1-picrylhydrazyl) method determined IC50 rates were 476.4 ± 33.6 and 483.5 ± 20.4 µg mL-1respectively for unencapsulated oil and for NP-T, evidencing pronounced antioxidant activity. NP-C, NP-T and synthetic antioxidant butylhydroxytoluene (BHT) were applied to samples of mayonnaise and their oxidative stability evaluated for eight days in an oven at 63 ± 3ºC. Results of hydroperoxide value (HP) and thiobarbituric acid reactive substances (TBARS) showed that NP-T had a similar performance as synthetic antioxidant BHT in the prevention of mayonnaise lipid oxidation.

O objetivo do trabalho foi avaliar os parâmetros da extração de β-glucanas de cevada e caracterizar parcialmente o amido residual da extração. Foi desenvolvida metodologia para extração de β-glucanas de cevada sem degradação do amido, avaliando as variáveis pH e temperatura de extração. O percentual de β-glucanas extraída variou de 44,21 a 53,38%, sendo influenciado pela temperatura, e o de amido extraído variou de 65,98% a 77,54%, sendo influenciado pelo pH. O amido residual da extração de β-glucanas de cevada apresentou poder de inchamento e solubilidade de 8,54±0,29% e 6,04±0,073%, respectivamente. O amilograma de ARV desse amido apresentou viscosidade máxima de 164,67±1,30 RVU e quebra de viscosidade de 45,79±2,06 RVU. O espectro de infravermelho do amido residual é típico de amido de cevada nativo e semelhante ao de amidos isolados de milho, trigo e mandioca. De acordo com as micrografias eletrônicas de varredura da fração amido, foi possível visualizar uma mistura de grânulos grandes e lenticulares, com um diâmetro médio de 19,15µm e de granulos pequenos com forma esférica, de 4,78µm. As características demonstradas pelo amido residual da extração de β-glucanas de cevada sugerem sua viabilidade para utilização na indústria de alimentos.

The objective of the study was to evaluate the parameters of the extraction of barley´s β-glucans and partially characterize the residual starch after extraction. A method was developed for the extraction of barley β-glucans without damaging the residual starch, assessing the variables pH and extraction temperature. The percentage of β-glucans in the extracted fraction varied from 44,21 to 53,38% , being influenced by temperature and the extracted starch varied from 65,98% a 77,54%, being influenced by pH. The residual starch from barley's β-glucan extraction had a swelling power and solubility of 8.54±0.29% and 6.04±0.07%, respectively. The RVA´s amylograph for this starch showed a maximum viscosity of 164.67±1.30 RVU and breakdown viscosity of 45.79±2.06 RVU. The infrared spectrum of the residual starch was typical of native barley starch and similar to isolated starch from corn, wheat and cassava. According to the scanning electron micrographs fraction of starch, it was possible to see a mixture of large lenticular granules with an average diameter of 19.15µm and small spherically shaped ones, with 4.78µm. The characteristics showed by the residual starch from barley´s β-glucan extraction, suggest a possible application in the food industry.