Abstract Rotational instrumentation is an alternative for the clinical practice of pediatric dentists. However, there are few records in the literature on the clinical and radiographic aspects of treated teeth over time. Objectives: Compare instrumentation time and filling quality between manual (k-file) and rotary (Hyflex EDM®) files, and clinically and radiographically follow-up the treated teeth for 12 months. Moreover, the characteristics of glass ionomer restorations and their interference in the treatment prognosis over time were evaluated. Methodology: In total, 40 children with pulp involvement in primary molars received treatment with Hyflex EDM® or manual rotary files, performed by an operator. Clinical and radiographic aspects were observed at different times to determine the effectiveness of each technique. Results: The rotary system reduced instrumentation time when compared to the use of manual files (p≤0.05), but there was no difference in filling quality between the groups (p≥0.05). Moreover, both types of instrumentation were effective for 12 months (p≥0.05), and restoration retention influenced the emergence of periapical lesions (p≤0.05). Conclusion: Although rotary files reduce clinical time, the clinical and radiographic aspects of both techniques were similar over 12 months. Moreover, restoration retention has been shown to be related to treatment prognosis.

ABSTRACT Objective: To evaluate the pulp tissue of rat molars after pulpotomies with mineral trioxide aggregate (MTA), BiodentineTM (BDT) and calcium hydroxide (CH) mixed with sterile saline solution (24 hours, 72 hours, 7 days and 15 days), through correlating MPO activity with active neutrophils and MMP8 activity with tissue remodeling. Material and Methods: Thirty-eight Wistar rats were randomly distributed into groups (control, I (MTA gray), II (BDT), and III (CH)) and subdivided according to the study period of 24 hours, 72 hours, 7 days or 15 days after pulpotomy. MMP8 activity was assessed through fluorescence technique, and MPO activity was determined using the MPO assay. Results: A gradual decrease of MPO and MM8 activity occurred in the group MTA over the experimental periods (p<0.05). Groups BDT and CH exhibited an increase in the activity at 7 and 15 days (p<0.05). Conclusion: MTA demonstrated a decrease in the values of MPO e MMP8. BDT and CH showed high neutrophilic and collagenase activity over the experimental periods.

RESUMO Objetivo Avaliar se dois géis clareadores diferentes afetam a microdureza e a rugosidade superficial de corpos de prova de cerâmicafeldspática, in vitro. Métodos um total de 48 discos de porcelana feldspática IPS In Line (Ivoclar-Vivadent) (16 / grupo de tratamento) foram imersos em água destilada (Grupo I, Controle não tratado, ONU), ou tratados com os géis clareadores: Opalescence (15 % peróxido de carbamida; OPA) e Opalescence Xtra Boost (38% peróxido de hidrogênio; OPAXB), por 1h ou 6h diariamente por 14 dias. Medidas de rugosidade superficial (Ra) e microdureza (Knoop, ou KNP) foram regristradas antes e depois do tratamento, e os dados foram submetidos à análise estatística por teste t de Student pareado (P <0,05). Resultados Os tratamentos com Opalescence e Opalescence Xtra Boost não alteraram a rugosidade superficial (p = 0,6199861) ou a microdureza (p = 0,14286744) da porcelana feldspática testada neste estudo. Conclusão Os tratamentos clareadores com Opalescence e Opalescence Xtra Boost podem ser adequados para o tratamento de pacientes submetidos ao tratamento com prótese cerâmica.

ABSTRACT Objective: To evaluate whether two different bleaching gels affect the microhardness and surface roughness of feldspathic ceramic specimens, in vitro. Methods: A total of 48 feldspathic porcelain IPS In Line (Ivoclar-Vivadent) discs (16/treatment group) were immersed in distilled water (Group I, Untreated control, UN), or treated with the bleaching gels: Opalescence (15% carbamide peroxide; OPA) and Opalescence Xtra Boost (38%hydrogen peroxide; OPAXB), for 1h or 6h daily for 14 days. Surface roughness (Ra) and microhardness (Knoop, or KNP) measurements were made before and after treatment, and data were subjected to statistical analysis by paired Student’s t-test (p < 0.05). Results: Treatments using Opalescence and Opalescence Xtra Boost did not altered surface roughness (p=0.6199861) or microhardness (p=0.14286744) of the feldspathic porcelain tested in this study. Conclusion: Bleaching treatments using Opalescence and Opalescence Xtra Boost may be suitable for treatment in patients having ceramic prosthodontic treatment. Conclusion: Bleaching treatments using Opalescence and Opalescence Xtra Boost may be suitable for treatment in patients having ceramic prosthodontic treatment.

Abstract Objectives: To evaluate the effect of calcium hydroxide (CH) associated with two different vehicles as a capping material for pulp tissue in primary molars, compared with mineral trioxide aggregate (MTA). Methodology: Forty-five primary mandibular molars with dental caries were treated by conventional pulpotomy using one of the following materials: MTA only (MTA group), CH with saline (CH+saline group) and CH with polyethylene glycol (CH+PEG group) (15 teeth/group). Clinical and periapical radiographic examinations of the pulpotomized teeth were performed 3, 6, and 12 months after treatment. Data were tested by chi-squared analysis and a multiple comparison post-test. Results: The MTA group showed both clinical and radiographic treatment success in 14/14 teeth (100%), at all follow-up appointments. By clinical evaluation, no teeth in the CH+saline and CH+PEG groups had signs of mobility, fistula, swelling or inflammation of the surrounding gingival tissue. However, in the CH+saline group, radiographic analysis detected internal resorption in up to 9/15 teeth (67%), and inter-radicular bone resorption and furcation radiolucency in up to 5/15 teeth (36%), from 3 to 12 months of follow-up. In the CH+PEG group, 2/11 teeth (18%) had internal resorption and 1/11 teeth (9%) presented bone resorption and furcation radiolucency at all follow-up appointments. Conclusion: CH with PEG performed better than CH with saline as capping material for pulpotomy of primary teeth. However, both combinations yielded clinical and radiographic results inferior to those of MTA alone.

Resumo O objetivo deste estudo foi avaliar os resultados clínicos, radiográficos e histológicos do complexo dentino-pulpar de molares decíduos após pulpotomia com agregado trióxido mineral (MTA) e sulfato férrico (SF) 15,5%. Trinta e um molares decíduos foram alocados aleatoriamente nos grupos MTA ou SF. As avaliações clínicas e radiográficas foram realizadas aos 3, 6, 12 e 18 meses de acompanhamento. Os dentes no período regular de esfoliação foram extraídos e processados para análise histológica. Os dados clínicos e radiográficos foram analisados estatisticamente (p≤0,01). O resultados histológicos foram analisados descritivamente. Todos os dentes tratados apresentaram sucesso clínico ao longo dos períodos experimentais. Ambos os grupos exibiram 100% de sucesso radiográfico aos 3, 6 e 12 meses. Aos 18 meses de acompanhamento, um dente do grupo SF apresentou radiolucidez interradicular (p>0,01). Histologicamente, os dentes tratados apresentaram vitalidade pulpar e ausência de infiltrado inflamatório no tecido conjuntivo. Somente o grupo MTA mostrou barreira de tecido duro rodeada por odontoblastos sobre os cotos pulpares. MTA e SF 15,5% são eficazes para pulpotomias de dentes decíduos. Embora o MTA seja considerado o material de primeira escolha, o SF pode ser uma alternativa adequada quando o custo do tratamento é um problema.

Abstract The aim of this study was to evaluate the clinical, radiographic and histological outcomes of the dentin-pulp complex from primary molars after pulpotomy with mineral trioxide aggregate (MTA) and 15.5% ferric sulfate (FS). Thirty-one primary molars were randomly allocated into MTA or FS groups. Clinical and radiographic evaluations were recorded at 3-, 6-, 12- and 18-month follow-up. Teeth at the regular exfoliation period were extracted and processed for histological analysis. Clinical and radiographic data were tested by statistical analysis (p≤0.01). Histological outcomes were analyzed descriptively. All of the treated teeth presented clinical success over the experimental periods. Both groups exhibited 100% of radiographic success at 3, 6 and 12 months. At the 18-month follow-up, one tooth from FS group presented inter-radicular radiolucency (p>0.01). Histologically, the treated teeth presented pulp vitality and absence of inflammatory infiltrate into the connective tissue. Only MTA group showed hard tissue barrier surrounded by odontoblasts over the pulp stumps. Both MTA and 15.5% FS are effective for pulpotomies of primary teeth. Although MTA is considered the first-choice material, FS may be a suitable alternative when treatment cost is an issue.

INTRODUÇÃO: A pulpotomia em dentes decíduos é uma técnica conservadora de terapia pulpar amplamente utilizada em Odontopediatria, sendo de fundamental importância para evitar a perda prematura desses dentes, quer seja por alterações provocadas pela cárie dentária ou traumatismo dentário. Apesar de ser uma técnica estudada há muitos anos, causa muitas controvérsias e discussões, principalmente em termos de biocompatibilidade dos medicamentos empregados e pelas dificuldades e falhas no diagnóstico da condição pulpar. OBJETIVO: Por meio de uma revisão sistemática da literatura, no período compreendido entre 2000 e 2011, e com enfoque em estudos clínicos randomizados, revisões sistemáticas e meta-análises, este trabalho teve como objetivo discutir, com base em evidências científicas, alternativas para o tratamento de pulpotomia em dentes decíduos humanos. CONCLUSÃO: As evidências científicas fidedignas com o uso de materiais capeadores pulpares e as técnicas de Eletrocirurgia e Laser de Baixa Potência foram escassas. Desta forma, sugere-se a realização de estudos complementares bem delineados estatisticamente para maiores esclarecimentos. As informações geradas em tais experimentos poderão contribuir para um melhor entendimento dos mecanismos da terapia pulpar, podendo gerar o desenvolvimento de protocolos com novas formas terapêuticas, que visam a melhorar a terapia pulpar em dentes decíduos.

INTRODUCTION: Pulpotomy of primary teeth has been the treatment of choice in cases of inflammation of the coronal pulp caused by caries or trauma with no involvement of the radicular pulp, thus avoiding the premature loss of the teeth. Not only is the diagnosis of the inflamed dental pulp required for this therapy to succeed, but also the selection of an effective and biocompatible medicament. However, none of the drugs available and recommended for pulpotomy therapy present all the requirements of an ideal pulp capping agent. OBJECTIVE: Through a systematic literature review, between the years of 2000 and 2011, focusing in randomized clinical trials, systematic reviews and meta-analysis, aiming to analyze and discuss based on alternatives for the treatment of pulpotomy in human deciduous teeth. CONCLUSION: Scientific evidences showed that the medicaments and techniques influence were few. Thus, further and well-designed studies are suggested for clarification. The information generated in such experiments may contribute to a better understanding of the mechanisms of pulp therapy to new therapeutic approaches aimed at improving pulp therapy in deciduous teeth.

Cyanocrylates have been widely used in the medical and dental fields for several years. In Dentistry, cyanoacrylates have been used for suturing, pulp capping, as retrofilling material in endodontic surgeries, and as cervical plug for pulpless teeth bleaching. The biocompatibility of these adhesives has been the topic of many researches and subcutaneous implantation is an effective methodology for these studies. The present study evaluated the biocompatibility of three different cyanoacrylate-based adhesives. Thirty-six Wistar rats were used, divided into four groups of 9 animals each: A (control) - distilled water, B - cyanoacrylate ester (Super Bonder), C - n-butyl-cyanoacrylate (Histoacryl) and D - alpha-cyanoacrylate (Three Bond). The materials were dispensed in sponges of polyvinyl chloride, the animals were incised and the sponges were inserted in the subcutaneous tissue and sutured. Each group was sub-divided according to the time of sacrifice of the animals: 7, 21 and 45 days. Subjective analysis of the histologic material showed that all groups presented some degree of irritability, but the inflammatory reaction decreased with the experimental time in all groups. Group D showed an inflammatory reaction which was closer to that of the control group and was considered to have good biocompatibility. Groups B and C were similar and presented more aggressive inflammatory reactions when compared to the control group. Based on the results, it was concluded that alpha-cyanoacrylate (Three Bond) was the most biocompatible adhesive because it caused the lowest levels of inflammation.