The development of drug delivery systems for photodynamic therapy (PDT) is increasingly demanded due to the hydrophobicity presented by most of photosensitizers molecules. Bacterial cellulose (BC), a highly pure cellulose produced by bacteria, possesses the essential features for applications in drug delivery systems, such as large surface area and excellent loading capacity. BC membranes prepared containing a photosensitizer, chloroaluminum phthalocyanine (ClAlPc), were tested aiming applications as a drug delivery system for PDT skin cancer protocols. BC membranes production was optimized regarding thickness and optical transmission. Thinner membranes lead to higher relative incorporation efficiencies. Skin permeation and retention in vitro tests were performed by using pig's ears as a skin model. ClAlPc was retained at stratum corneum and epidermis/dermis, showing adequate properties for topical administration of ClAlPc. Photophysical studies showed that singlet oxygen production was not affected for ClAlPc compartmentalized in the BC array. BC-ClAlPc membranes did not present cytotoxic effects in vitro.

In this second part it will be discussed some photonic applications of glassy and glass ceramic thin films which can be used as planar waveguides. Some photonic applications require certain specifications of glass, which can be quantified by studying the nonlinear optical properties of the materials. Therefore, a brief introduction of these phenomena is discussed, as well as the use of femtosecond lasers to manipulate the composition or for the preparation of waveguides into glasses. Finally, the article will address a brief introduction on microstructured optical fibers and commercial application prospects for these devices.

2015 is the Year of Light, according to UNESCO. Chemistry has a close relationship with light and one of the materials that allows such synergy is glass. Depending on the chemical composition of the glass, it is possible to achieve technological applications for the whole range of wavelengths extending from the region of the microwave to gamma rays. This diversity of applications opens a large range of research where chemistry, as a central science, overlaps the fields of physics, engineering, medicine, etc., generating a huge amount of knowledge and technological products used for humanity. This review article aimed at discussing some families of glasses, illustrating some applications. Due to the extension of the theme, and all points raised, we thought it would be good to divide the article into two parts. In the first part we focus on the properties of heavy metal oxide glasses, fluoride glasses and chalcogenide glasses. In the second part we emphasize the properties of glassy thin films prepared by sol-gel methodology and some applications, of both glasses as the films in photonics, and more attention was given to the nonlinear properties and uses of photonic fibers.

New luminescent organic-inorganic hybrid particles based on Tb-doped aluminates and asparagine (Asn) surface modifiers were investigated. The Tb3+ doped inorganic core was obtained by spray pyrolysis, at 200 ºC γ-AlOOH (BOE:Tbx%) or at 700 ºC γ-Al2O3 (γTA:Tbx%). The reaction of Asn with boehmite in water disaggregated the sub-micronic boehmite particles to give stable dispersion of surface modified nanoparticles Asn:BOE:Tbx% (x = 1 or 5). Concerning the Asn:γTA:Tbx% system, an Asn film wrapping alumina particles was observed. Photoluminescence spectra exhibited the bands assigned to Tb3+5D4 → 7FJ = 6-3 transitions. A broad absorption band (240 nm) was assigned to the host (aluminate) to ion (Tb3+) energy transfer. Efficient energy transfer was observed when active ions are incorporated in the defect-spinel structure of γTA, whereas it was relatively weak for BOE:Tb where Tb3+ are bonded to the hydroxyls groups at nanocrystals surface. It is noticeable that Asn strengthens the linkage of Tb3+ with the aluminate matrix, enhancing the host to dopant energy transfer.

O presente trabalho discute os recentes avanços na biossíntese e na produção de celulose bacteriana (CB) pela gram-negativa, aeróbia e aceto-ácida Gluconacetobacter. xylinus. A CB se difere de seu par vegetal, principalmente devido ao seu caráter de fibras nanométricas, contra o caráter micrométrico da vegetal, são extruídas através da parede celular de G. xylinus, com isso sua estrutura macroscópica é mecanicamente e fisicamente mais resistente, abrindo grandes oportunidades de aplicações tecnológicas e biológicas, muito além das obtidas pela celulose vegetal. O desafio atual está no aumento da produção de CB, que se debruça num maior entendimento de sua biossíntese para que seja possível uma posterior manipulação genético-bioquímica oriundas do recente avanço na biologia molecular e nos bioprocessos. São relacionados trabalhos utilizando a CB como base para produção de compósitos como também o que a está sendo feito de mais atual com este material biológico.

The present paper discusses the recent advances about the biosynthesis and production of bacterial cellulose (BC), from gram-negative, aerobic and acetic acid Gluconcetobacter xylinus (Gx). The BC differs from his vegetal pair, mainly due his feature of nanometric fibers, as opposed to micrometric feature of vegetal cellulose, are extruded through the cellular wall of Gx, thereby the macroscopic structure of BC is mechanically and physically more resistant, open big opportunities of biological and technological applications, apart from that obtained by vegetal cellulose. The actual challenge is in the grown of production of BC, which deals a superior understanding of his biosynthesis, to makes possible a later genetic-biochemical manipulation derived from recent advances in molecular biology. Are related works using the BC for production of composites and also what is being done of more actual with this biological material.

A análise espectral só se torna confiável se o espectro é detalhadamente analisado quanto a todos os picos sobrepostos e ocultos. Neste trabalho são descritas as etapas para revelar e separar esses picos na faixa de 3000-4000 cm-1 em três espectros de absorção de infravermelho colhidos na superfície vítrea de fibras ópticas de sílica hidrolizada. A revelação dos picos foi feita com a análise da segunda e quarta derivada dos dados experimentais digitalizados, juntamente com o conhecimento disponível de espectroscopia de infravermelho da interação sílica-água na faixa espectral investigada. A separação de picos foi realizada com ajuste de curva usando quatro modelos distintos. O melhor ajuste foi alcançado com um modelo que descrevia os espectros com uma soma de picos do tipo Gaussiano. Mapas descrevendo os limites de ombro ("shoulder limits") e de detecção foram utilizados para validar os detalhes espectrais revelados.

Reliable spectral analysis is only achieved if the spectrum is thoroughly investigated in regard to all hidden and overlapped peaks. This paper describes the steps undertaken to find and separate such peaks in the range of 3000 to 4000 cm-1 in the case of three different infrared absorption spectra of the glass surface of hydrolyzed silica optical fibers. Peak finding was done by the analysis of the second and fourth derivatives of the digital data, coupled with the available knowledge of infrared spectroscopy of silica-water interaction in the investigated range. Peak separation was accomplished by curve fitting with four different models. The model with the best fit was described by a sum of pure Gaussian peaks. Shoulder limit and detection limit maps were used to validate the revealed spectral features.

Guias de luz planares foram obtidos a partir de um sol de um novo híbrido Ti4+-acetilacetona (acac)-Ureasil depositado na forma de filmes finos sobre substratos de vidro. A estrutura foi investigada por medidas espectroscópicas (absorção no infravermelho, fotoelétrons de raios-X e espalhamento Raman) e espalhamento de raios-X a baixos ângulos (SAXS). Para a adição do complexo Ti-acac ao ureasil na razão molar Ti:Si de 1:1 interações entre o complexo Ti-acac e grupos siloxanos foram identificadas. Quantidades maiores de Ti4+ (razão molar Ti:Si de 5:1) levam também à formação de nanoagregados ricos em titânio. Os parâmetros ópticos dos guias, como índice de refração, espessura, modos propagados e coeficiente de atenuação foram medidos para 632,8, 543,5 e 1550 nm pela técnica de acoplamento de prisma. O índice de refração pode ser controlado pela quantidade relativa de titânio. Guias de poucos micra de espessura suportam modos de propagação com baixas perdas para todas as composições.

Hybrid planar waveguides were prepared from Ti4+-acetylacetone (acac)-Ureasil sols deposited on glass substrates. Structural features have been investigated by spectroscopic measurements (Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS) and Raman scattering) and Small Angle X-ray Scattering (SAXS). Addition of Ti4+-acac to the ureasil (Ti:Si molar ratio 1:1) leads to the formation of bonds between the Ti complex and the siloxane groups, whereas further addition of Ti4+ (Ti:Si molar ratio 5:1) leads to the additional formation of titanium-rich nanoclusters. The optical parameters of the waveguides such as refractive index, thickness, propagating modes and attenuation coefficient were measured at 632.8, 543.5 and 1550 nm by the prism coupling technique. The refractive index can be tuned by the Ti4+ relative content. The few microns thick planar waveguides support well confined propagating modes with low attenuation loss for all compositions.

In this work we report some aspects of the chemistry involved in the preparation of modified silicon oxide by the sol-gel process. Europium III compounds were used as luminescent probe. An organic-inorganic hybrid was obtained by hydrolysis of tetraethylorthosilicate (TEOS) and 3-aminopropyltriethoxysilane (APTS). The Eu III compounds were added in different ways. In the first, silica was prepared in the presence of Eu III, and in the second, Eu III was added on the silica surface. These materials were studied by luminescence, infrared spectroscopy and termogravimetric analysis. The results obtained for the hybrid material show different behavior for Eu III emission, which could be excited by the antenna effect and the influence of the surrounding in the luminescence quenching. The thermogravimetric data present different mass loss in samples to range temperature 50 - 150 °C. Thermogravimetric and infrared spectra showed that inorganic polymers incorporated the organic part.

The conditions for the preparation of luminescent materials, consisting of Eu3+ ions entrapped in a titanium matrix, in the forma of a thin film, using the sol-gel process, are described. The films were obtained from sols prepared with TEOS and TEOT, in the presence of acetylacetone as the hidrolysis-retarding agent, using the dip-coating and spin-coating techniques. The influence of these techniques on the films based on titanium and silicon are presented. The Eu3+ was used as a luminescent probe. The films have been characterized by luminescence, reflection and transmittance. The thickness of the films could be related to the preparation procedure. Transparent thin films have been prepared by dip-coating technique.

A partir de resultados de experimentos de fusão e choque térmico, o domínio vítreo foi identificado no sistema PbF2-CdF2-B2O 3. Vidros puros e dopados com Er3+ foram preparados e vitrocerâmicas foram obtidas a partir de tratamentos térmicos adequados. A fase cristalina foi identificada como beta-PbF2. Estudos estruturais foram efetuados por difração e absorção de raios X e o papel desempenhado pelos átomos de Pb2+ e Cd2+ na estrutura vítrea foi estabelecido a partir destas técnicas. Os resultados sugerem que, com a cristalização, os íons Er3+ são segregados na fase cristalina.

The vitreous domain was established in the PbF2-CdF2-B2O 3 system from melting and quenching experiments. Er3+ containing glasses were prepared and glass ceramics were obtained by selected heat-treatments. Lead fluoride was identified (beta-PbF2) as the crystalline phase. Structural studies were performed in some glassy and partially crystallized samples by means of X-ray Diffraction (XRD) and Extended X-ray Absorption Fine Structure (EXAFS) measurements. The role of Cd2+ and Pb2+ atoms on the glass network formation and also on the crystallization behavior was put forward by these techniques. After crystallization Er3+ atoms segregated in the crystal phase.

Neste trabalho, usando o processo de coacervação, foi estudado o sistema NaPO3/AgNO3/H2O. Determinou-se o domínio de coacervação a partir de diferentes concentrações de NaPO3 e AgNO3 e a influência do pH na estabilização do coacervato foi determinada. Os coacervatos obtidos em pH ~ 5 apresentam maior região de estabilidade.

In this work, using coacervation process, the influence of the pH in the stability of the coacervates of the NaPO3/AgNO3/H2O system was studied. The coacervate domain was established using different concentrations of NaPO3 and AgNO3 and the influence of the pH in the stability of the coacervate was putfoward. The coacervates obtained at pH ~ 5 present highest stability.

Eu3+ luminescence and EXAFS (Extended X-ray Absorption Fine Structure) results are presented for organic-inorganic hybrid gel hosts composed of a siliceous network to which small chains of oxyethylene units are covalently grafted by means of urea bridges. Coordination numbers for Eu3+ ions range from 12.8 to 9.7 with increasing Eu3+ concentration while the Eu3+-first neighbours mean distance is found to be constant at 2.48-2.49 Å in the same concentration range. Emission spectra display a broad band in the green/blue spectral region superposed to narrow lines appearing in the yellow/red region in such a way that for the eyes emission appears white. The broad band is assigned to intrinsic NH groups emission and also to electron-hole recombination in the nanosised siliceous domains. The narrow lines are assigned to intra-4f6, 5D0->7F0-4 Eu3+ transitions and from the energy position of the 7F0-4 levels a mean distance could be calculated for the Eu3+-first neighbours. The calculated results are in good agreement with the experimental ones obtained from EXAFS analysis.

Eu3+ doped bulk monoliths and thin films were obtained by sol-gel methods in the ZrO2, SiO2 and SiO2-TiO2 systems. Eu3+ 5D0 <FONT FACE="Symbol">®</font> 7FJ emission and decay time characteristics were measured during the entire experimental preparation route from the initial sol to the final xerogels. The crystalline phases identified were tetragonal ZrO2 and mixtures of rutile and anatase TiO2 at high temperature treatments in bulk samples. Good quality thin films were obtained for all systems by dip-coating optical glasses (Schott BK270). The same spectroscopic features were observed either for the bulk monoliths or the films. By appropriate heat treatments under H2 atmosphere Eu2+ containing samples could be obtained in the SiO2-TiO2 system.