GH 909 alloy is a kind of low thermal expansion superalloy with high strength and low expansion coefficient. It is mainly used for manufacturing of aero-engine turbine casings, sealing ring, vanes and other gap control parts, to improve the working efficiency and thrust of the engine as well as to reduce gas loss and fuel consumption. However, the machinability is still a problem that restricts the application of GH909. This paper investigated the machinability referring to cutting forces, surface quality and tool wear in the milling process with carbide tool. The main conclusions are: (1) GH909 has similar machinability with other Nickel-based alloys, cutting velocity does not have great influence on cutting forces for small radial cutting depth. (2) Good machined surface quality can be get for cutting velocity around 70m/min. (3) To get good tool performance and reduce tool wear rate, cutting velocity can be set to no larger than 80m/min.

Inconel 718 is widely used in the aviation, space, automotive and biomedical industries because of its outstanding properties. Near-surface residual stresses that are induced by ball end milling in Inconel 718 can be crucial for the performance and service time of the machined parts. In this paper, the influences of cutting conditions, including the use of cutting parameters, cutting fluid and spindle angles, on the residual stresses in the ball end milling process of Inconel 718 alloy were investigated experimentally. X-ray diffraction measurements reveal that residual stress distributions are highly influenced by cutting parameters, especially the depth of cut and cutting speed. The milling operation with cooling induces more compressive stresses trend and the magnitude of the residual stresses increases in the tensile direction with the increase of spindle angles. These cutting induced effects were further discussed with respect to thermal- mechanical coupling theory and some observations made by optical microscopy. From this investigation, it is suggested that the machining process parameters are not the smaller the better for the control of residual stresses in the ball end milling process of Inconel 718.

Purpose: The G-protein β3-subunit gene C825T polymorphism (GNB3-C825T) has been reported to be associated with essential hypertension (EH), but results from previous studies are conflicting. The present study aimed at investigating the association between this polymorphism and risk of EH using a meta-analysis on the published studies. Materials and Methods: PubMed, Embase, CBM (China Biological Medicine Database), Wanfang and VIP databases were searched to identify eligible studies published in English and Chinese before March 2013. Data were extracted using standardized methods. The association was assessed by the odds ratio (OR) with 95% confidence intervals (CI). Begg's test was used to measure publication bias. Results: A total of 40 case-control studies containing 16,518 EH patients and 20,284 controls were involved in this meta-analysis. Overall, a significant association was found between GNB3 C825T polymorphism and risk of EH when all studies were pooled with a random-effects model for T versus C (OR=1.09, 95% CI: 1.04-1.19). In the subgroup analysis, the same association was found in overall Caucasian (T versus C, OR=1.16, 95% CI 1.08-1.24) and Chinese populations (TT versus CC, OR=1.23, 95% CI 1.06-1.57). No associations were detected between GNB3-C825T and the risk of EH overall in Asian and Japanese people. Conclusions: Meta-analysis results suggest that the GNB3-C825T polymorphism is associated with risk of EH in the overall population, the Caucasians and the Chinese. The effect of the variants on the expression levels and the possible functional role of the variants in EH should be addressed in further studies.