Abstract The objective of this study was to formulate an experimental light-cured periodontal dressing containing alpha-humulene and to compare its physical, antimicrobial, and cytotoxicity properties with commercial gold standards (Barricaid® and Periobond®). Two periodontal dressing formulations were developed (a and b). The formulations were divided into 5 groups according to the alpha-humulene concentration as follows: Ea - control group, Ea1 - 1%, Ea5 - 5%, Ea10 - 10%, and Ea20 - 20%; Eb - control group, Eb1 - 1%, Eb5 - 5%, Eb10 - 10%, and Eb20 - 20%. Materials characterization was performed using the degree of conversion, cohesive strength, sorption, and solubility assays. Antimicrobial assay was performed using the modified direct contact test against E. faecalis and S. aureus. Cytotoxicity was assessed by the cell viability experiment using L929 fibroblasts. In general, the cohesive strength values of materials decreased as the alpha-humulene concentration increased. All the experimental dressings showed antimicrobial activity against both bacteria tested. Cell viability results for the Ea, Ea1, Eb, and Eb1 groups showed moderate cytotoxic effect. The formulations containing alpha-humulene showed similar behavior to the commercial references. Thus, formulations containing alpha-humulene have potential to be used as periodontal dressing.

Abstract The objective of this study was to evaluate the biocompatibility and mechanical properties of two commercially available and one experimental periodontal dressing materials. The cytotoxicity of Periobond ® , Barricaid ® and one experimental periodontal dressing based on Exothane ® 8 monomer was tested on 3T3/NIH mouse fibroblast. Genotoxicity was assessed by micronuclei formation, and cell alterations were analyzed using light microscopy. Both biological assays were performed using the eluate obtained from specimens after 24, 72, or 168 hours of incubation. Mechanical characterization was assessed through the ultimate tensile strength and the water sorption and solubility tests. The significance level of α = 0.05 was used for all statistical analyses. All the materials promoted a cell viability lower than 60% in all evaluated times. In general, the cell viability was significantly reduced after 72 and 168h of specimens’ incubation. Considering the factor material, there were not statistical differences in the cell viability (p = 0.156). The genotoxicity was not statistically significant among the groups in the different periods of time (p > 0.05). Differences in the ultimate tensile strength values were not statistically significant different among the groups (p = 0.125). Periobond ® showed the higher water sorption values (p < 0.001). Regarding solubility, there were no statistical differences between the groups (p = 0.098). All the periodontal dressing materials evaluated in this study exerted a cytotoxic effect against mouse fibroblasts, and their toxicity became more evident over time. Among the materials evaluated, the experimental light-cure type has shown overall similar properties to the commercial references.

ABSTRACT Objective: To determine the prevalence of malocclusion and associated factors in children and the level of knowledge of mothers participating in the child care group of a basic health unit. Material and Methods: This is a cross-sectional study conducted in children between 18 and 72 months of a childcare group in Pelotas. Children whose parents or legal guardians signed the informed consent term participated in the study. Data were collected through a questionnaire previously tested and applied to the mothers, and a clinical examination of children's occlusion were performed by examiners after training and calibration. Statistical analysis was descriptive and analytic. In the bivariate analyses, it was used the Pearson, Fisher or Linear Trend Qui-Square tests and, in the multivariate analysis, the Poisson regression. Prevalence ratios and 95% confidence intervals were obtained, and a p-value <0.05 was used. Results: Forty-seven children were included and 41.3% presented malocclusion. The prevalence of malocclusion was associated with a higher number of children in the family (p<0.005) and breastfeeding for more than 12 months (p<0.05). The highest prevalence of open bite was associated with the use of a pacifier and working mothers (p<0.05). Conclusion: Most mothers reported having knowledge about the time and use of pacifiers in childhood. In this group, the prevalence of malocclusion in children was high and associated with behavioral and social factors.

Abstract To the moment, there is no ideal substance for home-based denture disinfection. This study assessed in vitro the antimicrobial effect of the hydroalcoholic extract of Eugenia uniflora and the effect on the physical properties of denture polymethylmethacrylate (PMMA). Candida albicans, Staphylococcus aureus, and Klebsiella oxytoca were isolated from samples of saliva collected from denture wearers. The extracts were produced in three concentrations, according to the Brazilian Pharmacopeia. One hundred eighty-eight disc-shaped specimens of thermopolymerizable PMMA were prepared and randomly allocated to five treatment groups: sterile saline solution (0.85%; control); chlorhexidine digluconate (0.2%); and hydroalcoholic extract of E. uniflora (0.2%, 0.8%, and 1.16%). The specimens were disinfected for 8 hours/day for 30 days. Adherence of microorganisms to the surface, PMMA surface roughness, and color stability were assessed. Inferential statistics were performed with one- and two-way ANOVA/Tukey test, and Kruskal Wallis, Mann-Whitney U, and paired t-tests, at α=0.05. The extract of E. uniflora at 0.2% and 1.16% reduced the microbial load of K. oxytoca, while chlorhexidine digluconate significantly reduced microbial load of all microrganisms. Microbial adherence at day 10 was reduced by all experimental substances (p<0.001). Surface roughness was not affected by the disinfecting substances (p>0.05). Nevertheless, all experimental groups produced unacceptable color change at the end of the disinfection protocol (p<0.001). The non-adherent potential against microorganisms isolated from the oral cavity confirm the potential of use of the hydroalcoholic extract of E. uniflora as a denture disinfectant. Yet, unacceptable color changes may occur, regardless of extract concentration.

Abstract Objectives: This study investigated the physical and mechanical properties, antibacterial effect and biocompatibility of novel elastomeric temporary resin-based filling materials (TFMs) containing zinc methacrylate (ZM). Material and Methods: Experimental TFMs were prepared by mixing the zinc methacrylate with monomer, co-monomer, photoinitiator and fillers. A ZM concentration of 0 (control), 0.5% (Z0.5); 1% (Z1), 2% (Z2), or 5% (ZM5) wt% was added to the TFMs. Fermit-N (F) was used for comparison with the experimental material. Microleakage, water sorption/solubility, degree of conversion, depth of cure, ultimate tensile strength, and hardness were determined and compared. A modified direct contact test (DCT) with Enterococcus faecalis and a Streptococcus mutans’ biofilm accumulation assay was carried out to evaluate the antimicrobial effect and cytotoxicity of the assay. Statistical comparisons were performed (α=5%). Results: The results showed that the physical and mechanical properties of the experimental TFMs with ZM are comparable with the properties of the commercial reference and some properties were improved, such as lower microleakage and water sorption, and higher ultimate tensile strength values. TFMs with ZM killed E. faecalis only after 1 h. Biofilm development of S. mutans was not affected by the inclusion of ZM in the experimental TFMs. Conclusions: The present findings suggest that the physical, mechanical and biological properties of the experimental TFMs with ZM are comparable with the properties of the commercial reference. However, some properties were improved, such as lower microleakage and water sorption, and higher ultimate tensile strength values.

Abstract Pyroligneous extract is applied in diverse areas as an antioxidant, an antimicrobial, and an anti-inflammatory agent. The discovery of new cost-effective antimicrobial agents of natural origin remains a challenge for the scientific community. This study aimed to conduct a systematic review and a technological forecasting of the existent evidence regarding the use of pyroligneous extract as a potential antimicrobial agent. Studies were identified through an investigation of various electronic databases: PubMed, SciFinder, Web of Science, Scopus, Scielo, Google scholar, and ProQuest. Patents were searched through INPI, Google patents, Espacenet, Patents online, USPTO, and WIPO. The literature on antimicrobial activity of pyroligneous extract are limited given the short duration of studies and variability in study design, use of pyroligneous preparations, and reports on results. However, evidence suggests the potential of pyroligneous extract as a natural antimicrobial agent. The most studied activity was the role of PE as a food preservative. However, pyroligneous extracts are also effective against pathogenic bacteria in the oral microflora and treatment of candidal infections. Further research is needed using standardized preparations of pyroligneous extracts to determine their long-term effectiveness and ability as antimicrobial agents.

Abstract The objective of this study was to compare selective physical-mechanical properties, antibacterial effects and cytotoxicity of seven temporary restorative materials (TRM): five resin-based materials [Bioplic (B), Fill Magic Tempo (FM), Fermit inlay (F), Luxatemp LC (L) and Revotek LC (R)], and zinc oxide-eugenol cement (IRM) and glass ionomer cement (GIC) as the controls. Material and methods The physical-mechanical properties were evaluated by determining microleakage (ML), ultimate tensile strength (UTS) and Shore D hardness (SDH). In addition, the polymerization rate (Pr-1), depth of cure (DC), water sorption and solubility (WS/SL) were evaluated. The antimicrobial effects of the materials were assessed by biofilm accumulation of Streptococcus mutans (BT) and the direct contact test (DCT) by exposure to Enterococcus faecalis for 1 and 24 h, and cytotoxicity by MTT assay. The data were analyzed by ANOVA or Kruskall-Wallis tests, and a complementary post-hoc method (p<0.05). Results Group B, followed by FM and GIC had significantly lower percentages of microleakage in comparison with the other groups; Groups FM and L showed the highest WS, while Groups R and FM showed the significantly lowest SL values (p<0.05). Group R showed the statistically highest UTS mean and the lowest DC mean among all groups. Group F showed the lowest S. mutans biofilm accumulation (p=0.023). Only the Group L showed continued effect against E. faecalis after 1 h and 24 h in DCT. The L showed statistically lower viability cell when compared to the other groups. Conclusions These findings suggest the antibacterial effect of the temporary materials Fill Magic and Bioplic against S. mutans, while Luxatemp showed in vitro inhibition of S. mutans biofilm accumulation and E. faecalis growth. Regarding the cell viability test, Luxatemp was the most cytotoxic and Fill Magic was shown to be the least cytotoxic.

Abstract Despite the large number of published studies about oral candidiasis and associated risk factors, reports of large single-center retrospective studies on the prevalence of oral candidiasis, risk factors, and the oral candidiasis types diagnosed more frequently in oral diagnostic reference centers are scarce. The objective of the present study was to retrospectively survey the demographic and clinical profiles of 1,534 patients diagnosed with candidiasis and treated at the Center for Diagnosis of Oral Diseases (CDOD), Pelotas Dental School, Federal University of Pelotas between 1997 and 2014. Using a retrospective, cross-sectional, epidemiological design, data on race, gender, age, systemic diseases, oral candidiasis type and location, symptoms, and harmful habits such as smoking and alcohol consumption were collected. The statistical analysis was performed using STATA version 13.1. Risk factors for chronic atrophic candidiasis (CAC) were evaluated using Poisson regression with robust variance (p ≤ 0.05). The majority of patients with oral candidiasis seen at the CDOD over the 18-year period of analysis were Caucasian women, aged 51–60 years, nonsmokers, and nondrinkers, with no systemic disease, and who wore some form of dental prostheses. CAC was the single most common clinical type of candidiasis detected, and the most frequently affected oral site was the palate. These data from a large single-center in Brazil agree with previous evidence about the clinical and demographic profiles of patients with oral candidiasis.

Abstract A randomized, double-blind, split-mouth clinical trial was performed compared the desensitizing efficacy of the resin-modified glass ionomer cement (GIC) ClinproTM XT (3M ESPE, Minnesota, USA) and the conventional GIC Vidrion R (SS White, Gloucester, UK) in a 6-month follow-up. Subjects were required to have at least two teeth with dentin hypersensitivity. Teeth were divided at random into 2 groups, one group received Clinpro XT and the other conventional GIC Vidrion R. Treatments were assessed by tactile and air blast tests using Visual Analogue Scale (VAS) at baseline, after 20 minutes, and at 7, 15, 21, 30, 90 and 180 days post-treatment. Twenty subjects (152 teeth) were included. Both tests (tactile and air blast) showed a significant reduction of dentin hypersensitivity immediately after the application of Vidrion R and Clinpro XT (20 min). VAS scores obtained along the 6-month follow-up were statistically lower when compared to initial rates (p < 0.05). Both GIC were able to reduce dentin hypersensitivity up to 6-month post-treatment period without statistically significant differences among them (p > 0.05). Both cements provided satisfactory results in long-term dental sensitivity reduction.

AIM: To determine the prevalence and the hygiene methods used by 6-16-year-old private school children and adolescents to clean removable orthodontic appliances (ROA) in the city of Pelotas, RS, Brazil. METHODS: A cross-sectional study was conducted in private schools located in the urban area after the school tutors signed an informed consent form. Questionnaires were applied to children using removable orthodontic appliances. Data regarding hygiene methods of orthodontic appliances were collected. Descriptive analysis was performed. Pearson's chi-square test and Linear Trend with a confidence level of 95% were used for analytical analysis. RESULTS: Children using ROA in private schools were 7.6%. The most frequent hygiene method used was mechanical cleansing with toothbrush and toothpaste (85.6%). Daily cleansing was the frequency most reported by children (51.6%). CONCLUSIONS: Use of ROA in students from private schools was low and the most used hygiene method was brushing with toothpaste.

Objectives: The aim of this study was to assess technical preferences of general dental practitioners when restoring anterior composite restorations. How the level of clinical experience or post-graduate training infuenced their options was also tested. Material and Methods: A cross-sectional study was performed using a questionnaire with general dental practitioners (GDPs) (n=276) in Southern Brazil. Information regarding post graduation training (specialization, master's or PhD degree) and linical experience (years since completing graduation) were gathered. The options regarding anterior composite restorations (type of composite, adhesive system, light curing unit, polishing procedures and rubber dam use) were collected. Data were submitted to descriptive analysis and associations were tested. Results: Response rate was 68% (187). GDPs selected microhybrid composite (52%) and 2-step total etch adhesive system (77%). LED was the preferred method of activation for 72.8%. Immediate polishing was preferred by 75%, using a combination of techniques. Most of the respondents (74.3%) did not use rubber dam. More experienced clinicians used more halogen lights (p<0.022), performed more light monitoring (p<0.001) and were resistant to use rubber dam (p<0.012). Dentists with post-graduation training used 3-etch-and-rinse system more frequently (p<0.04), usually monitored light intensity (p<0.014) and placed rubber dam more frequently (p<0.044). Conclusions: Hybrid composite, simplifed adhesives, LED units and immediate polishing were preferred by Southern Brazilian dentists for anterior composite restorations. Few dentists used rubber dam to perform composite restorations in anterior teeth. Clinical experience and post-graduation training infuenced the dentists' choices.

AIM: To identify the predominant causes and types of maxillofacial trauma in Brazil. METHODS: Reports of corporal trauma (7,536) between 2009-2010 in the Brazilian Institute of Forensic Medicine were analyzed as to the presence of maxillofacial traumas. Victims' demographic and trauma characteristics were recorded. RESULTS: Data were submitted to chi-square test and to multivariate Poisson regression. 778 reports referred maxillofacial trauma. Most victims were men (50.8%) around 27.6 years. Main causes were physical aggression (88.1%) and traffic accidents (6.7%). The most affected extraoral area was the middle third (60.7%). Risk for trauma in the middle third was significantly higher among patients aged 61-75 (RR 1.32), and non-white patients (black-skinned RR 1.21; brown-skinned RR 1.18); while falls were associated with trauma in the lower third (RR1.79). CONCLUSIONS: Violence was the main cause of maxillofacial trauma. Prevention of interpersonal violence may be a key element to prevent maxillofacial trauma.

OBJECTIVE: The aim of this study was to investigate the coronal microleakage of endodontically treated teeth prepared to receive an intracanal post and teeth with an intracanal post but without a prosthetic crown and exposed to contamination by fresh human saliva. MATERIAL AND METHODS: A mechanical-chemical preparation following the step-back technique was carried out in 35 extracted single-rooted human teeth. The teeth were randomly divided into five groups: G1=root canals instrumented, obturated, and prepared to receive an intracanal post (N=10); G2=root canals with cemented posts but without coronal sealing (N=10); PC1=positive control root canals instrumented and open (N=5); PC2=positive control 2 root canals without instrumentation and open (N=5); and NC=negative control healthy teeth (N=5). The crowns were removed except for the control group of intact teeth. The root canals were obturated and sterilized with cobalt 60 gamma irradiation and were then adapted in an apparatus using a Brain Heart Infusion (BHI) medium and fresh human saliva for contamination. Microbial growth was indicated by the presence of turbidity in the BHI liquid medium. RESULTS: Data were submitted to the Kaplan-Meier Survival Analysis and the Holm-Sidak statistic method, which observed an index of 90% of microleakage in root canals after 24 hours for G1 and 70% of microleakage in samples at the end of 40 days for G2. CONCLUSION: The results show that root canals with an intracanal post but without a prosthetic crown can be recontaminated when exposed to fresh human saliva in a short period.

Este estudo retrospectivo avaliou o comportamento clínico e as razões de falhas de restaurações de resina composta em dentes anteriores e posteriores, realizadas por alunos de graduação em odontologia, após 3 anos de acompanhamento. Cento e dois pacientes que tiveram restaurações de resina composta colocadas por alunos do terceiro ou quarto ano foram rechamados e examinados para analisar a qualidade das restaurações. Todas as cavidades foram restauradas utilizando Prime & Bond 2.1 e TPH (Dentsply), de acordo com as orientações do fabricante. As restaurações foram avaliadas utilizando o sistema USPHS modificado. Duzentas e cinquenta e seis restaurações de resina composta, 170 em dentes anteriores e 86 em posteriores foram avaliadas. Destas restaurações, 85% foram consideradas satisfatórias após 3 anos. Cavidades de classe II e classe IV apresentaram maior prevalência de falhas. Perda de restaurações e adaptação marginal deficiente foram as maiores causas de falhas. Nenhuma restauração falhou em decorrência de cárie secundária. Em conclusão, restaurações de resina composta feitas por estudantes de odontologia foram na sua maioria consideradas satisfatórias após 3 anos. Falhas das restaurações foram mais prevalentes em restaurações maiores e não esteve associada com cárie secundária.

This retrospective study evaluated the clinical performance and the reasons for failure of anterior and posterior composite restorations placed by undergraduate dental students over a 3-year period. All cavities were restored using Prime & Bond 2.1 and TPH (Dentsply), according to the manufacturer's indications. One hundred and two patients who had received composite restorations by third and forth year undergraduate students were recalled and examined to analyze the quality of the restorations. The restorations were evaluated using the modified USPHS system. Two hundred and fifty-six composite restorations, 170 in anterior teeth and 86 in posterior teeth, were evaluated. Eighty-five percent of the restorations were considered satisfactory after 3 years. Class II and class IV restorations presented the highest prevalence of failure. Loss of the restoration and deficient marginal adaptation were the main causes of failure. No restoration failed due to secondary caries. Most restorations placed by dental students were considered satisfactory after long-term evaluation. Failure was more prevalent in larger restorations and was not associated with secondary caries.

O presente estudo avaliou a solubilidade da guta-percha em quatro solventes orgânicos empregados em endodontia. A solubilidade da guta-percha (Dentsply) foi testada em xilol, óleo de laranja, eucaliptol, clorofórmio e água destilada. Foram preparadas cento e cinqüenta amostras de guta-percha por meio de uma matriz metálica que foram divididas em cinco grupos para imersão nos diferentes solventes a serem testados e na água destilada (grupo controle) durante 2, 5 e 10 minutos. As médias da dissolução da guta-percha nos diferentes solventes foram obtidas pela diferença entre o peso inicial pré-imersão e o peso pós-imersão através de uma balança analítica digital (Gehaka - AG2000). Os dados foram analisados estatisticamente através da análise de variância (ANOVA) e comparações múltiplas com teste de Scheffe’s (p < 0,05). A melhor capacidade de solvência foi obtida com o xilol. Clorofórmio, óleo de laranja e eucaliptol apresentaram resultados semelhantes, e a água destilada não promoveu alterações na guta-percha.

The aim of this study was to evaluate the solubility of gutta-percha in four organic solvents used in endodontics. The solubility of gutta-percha (Dentsply) was assessed in xylol, orange oil, eucalyptol, chloroform and distilled water. A hundred and fifty samples of gutta-percha were prepared using a standardized stainless steel mould and divided into five groups for immersion in the different solvents tested and in distilled water (control group) for 2, 5 and 10 minutes. The means of gutta-percha dissolution in the solvents were obtained by the difference between the pre-immersion original weight and the post-immersion weight in a digital analytical scale (Gehaka - AG2000). Data were statistically analyzed by Analysis of Variance (ANOVA) and multiple comparisons with Scheffe’s test (p < 0.05). The best solvency capacity was obtained with xylol. Chloroform, orange oil and eucalyptol presented similar results, and distilled water did not promote alterations in the gutta-percha.