Numerical simulation was used to predict the thermal behavior and the resulting microstructure at the heat-affected zone (HAZ) of a 170 mm diameter and 3.5 mm thickness super duplex stainless steel (SDSS) UNS S32750 tube. In order to evaluate the thermal response from the model, a usual welding situation involving interpass temperature (IT) and its influence on the HAZ microstructure was exploited. Thus, two superimposed autogenous welding passes were simulated, the first clockwise with the tube in the room temperature and the second, counterclockwise, with the tube at the temperature of 250oC. Even subjected to successive thermal cycles and high interpass temperature, the proportion and morphology of the phases at the HAZ and Fusion Zone (FZ) did not present significant differences when comparing the two welding passes. Meanwhile, nitrogen losses should be avoided during welding in order to obtain a balanced microstructure in DSS welds, contributing to guarantee satisfactory toughness in addition to resistance to pitting corrosion. The predictions from the simulation were validated by using experimental results obtained from the autogenous TIG (Tungsten Inert Gas) process. heataffected heat affected (HAZ 17 35 3 5 3. SDSS (SDSS S S3275 model IT (IT exploited Thus simulated second counterclockwise 250oC oC FZ (FZ Meanwhile welds corrosion Tungsten Gas process 1 S327 S32 S3

Resumo: Um desafio bem conhecido é prever as transformações que ocorrem durante a soldagem das ligas metálicas com o objetivo de controlar as propriedades da solda. Desta forma, este estudo apresenta um modelo Termo-Mecânico-Metalúrgico para predizer numericamente a história térmica, as transformações de fase no estado sólido, a microestrutura de solidificação e a distribuição de dureza durante e após a soldagem de aços de alta resistência e baixa liga. O modelo foi implementado numericamente em um código computacional próprio baseado no Método dos Volumes Finitos, o que permitiu rastrear e calcular dinamicamente as frações volumétricas de ferrita, perlita, bainita e martensita na zona afetada pelo calor, além da formação e determinação do espaçamento do braço dendrítico na zona de fusão, enquanto que a distribuição da dureza na zona afetada pelo calor foi calculada aplicando-se a regra da mistura de fases. Para tanto, soldas autógenas usando o processo Gas Tungsten Arc Welding de passe único foram simuladas numericamente e experimentalmente realizadas em amostras do aço de alta resistência e baixa liga AISI 4130, incluindo seu pré-aquecimento com o objetivo de avaliar a eficácia do modelo proposto para simular a soldagem de peças em diferentes condições térmicas iniciais, tendo sido obtida uma estreita concordância entre os resultados calculados e experimentais.

Abstract: A well-known challenge is to predict the transformations occurring during the metal alloys welding aiming to control the weldment properties. Thus, this study presents a Thermo-Mechanical-Metallurgical model to numerically predict the thermal history, the solid-state phase transformations, the solidification microstructure and the hardness distribution during and after the welding of high strength low-alloy steels. The model was numerically implemented in an in-house computational code based on the Finite Volume Method, which allowed to dynamically track and calculate the volume fractions of ferrite, pearlite, bainite and martensite at the heat-affected zone, besides the formation and determination of dendrite arm spacing at the fusion zone, whereas the hardness distribution at the heat-affected zone was calculated by applying the phase mixture rule. For this, single-pass autogenous Gas Tungsten Arc Welding welds were numerically simulated and experimentally carried out on high strength low-alloy AISI 4130 steel samples, including their preheating to evaluate the effectiveness of the proposed model to simulate the workpieces welding in different initial thermal conditions and a close agreement between the calculated and experimental results were obtained.

A phenomenological model to predict the multiphase diffusional decomposition of the austenite in low-alloy hypoeutectoid steels was adapted for welding conditions. The kinetics of phase transformations coupled with the heat transfer phenomena was numerically implemented using the Finite Volume Method (FVM) in a computational code. The model was applied to simulate the welding of a commercial type of low-alloy hypoeutectoid steel, making it possible to track the phase formations and to predict the volume fractions of ferrite, pearlite and bainite at the heat-affected zone (HAZ). The volume fraction of martensite was calculated using a novel kinetic model based on the optimization of the well-known Koistinen-Marburger model. Results were confronted with the predictions provided by the continuous cooling transformation (CCT) diagram for the investigated steel, allowing the use of the proposed methodology for the microstructure and hardness predictions at the HAZ of low-alloy hypoeutectoid steels.

Key microstructural changes that occur when Duplex Stainless Steels (DSS) are welded could be evaluated when bead-on-plate welding was carried out on a 2205 DSS by the GMAW process. By using numerical simulations, it was possible to calculate locally the heating and cooling rates taking place during the 2205 DSS welding and discuss its correlation to the microstructural changes experimented by the parent metal. Results showed that increasing heat input has promoted the ferritic grain growth with a slight reduction in the austenite content present at the high temperature heat affected zone (HTHAZ), whereas the cooling rates remained above from those reported as critical for sigma phase precipitation in 2205 DSS. Furthermore, nitrogen has proved to be an effective austenite former at the fusion zone (FZ), which can contributes to get a balanced microstructure in DSS welds in contrast to the effects from the elevated cooling rates.