Abstract The chemical conversion of gypsum into synthetic hydroxyapatite is an attractive approach to enhance the value of gypsum, a low-cost material, which can be discreetly implanted. The addition of biopolymers improves the resistance of the materials both before and after conversion. In this study, hydroxyapatite was produced from gypsum using a fixed water-to-gypsum ratio (w/g) of 0.7, along with gypsum/polymer composites. The polymers employed were polyhydroxybutyrate (PHB) and polyvinyl acetate (PVAc) at various mass ratios. Two methods were used to create the bodies: molding the paste and subtractive manufacturing. Mechanical compression tests were conducted both pre- and post-conversion to evaluate the impact of the conversion on material resistance and to compare it with the strength of subtractive manufacturing composites. For the gypsum/PHB composite, the best result was achieved at a 1% polymer concentration, yielding a resistance of 9.1±0.4 MPa, while for gypsum/PVAc, a compressive strength of 9.3±0.3 MPa was obtained at a 2% polymer concentration.

Abstract The process known as powder bed fusion exhibits a lack of stabilization in the initial layers. One approach to address this challenge involves introducing a gas flow across the particulate medium. This solution enables more targeted applications of the technique, especially in zero-gravity environments. The objective of this study is to validate a methodology that utilizes computational fluid dynamics (CFD) and the discrete element method (DEM) to apply a gas flow within a porous medium under gravity-free conditions. The validity of the proposed solution was assessed using Ergun’s equation, resulting in an error of 6.65%, and the Kozeny-Carman equation, resulting in an error of 10.53%. The drag force exerted on the particles in the simulations surpassed the gravitational force (1g). Consequently, the application investigated in this study represents an effective alternative for employing 3D printing in the absence of gravitational forces.

RESUMO O objetivo do estudo foi avaliar se a suplementação com diferentes níveis de selênio (Se) pode alterar os componentes bioquímicos e eletrolíticos do sêmen, ocasionando, por conseguinte, uma melhoria na qualidade seminal em carneiros. Foram utilizados 30 animais, mantidos em sistema intensivo de baias, alimentados com feno e ração comercial, sendo alocados em cinco grupos (seis animais/baia) e suplementados com uma mistura mineral contendo 0mg (G1), 5mg (G2), 10mg (G3), 15mg (G4) e 20mg (G5) de Se/kg. Cada grupo recebeu um tratamento diferente a cada 56 dias, e foi realizado um rodízio de tratamentos entre os grupos seguindo uma sequência dinâmica. Amostras de sêmen foram colhidas por eletroejaculação após o fim de cada tratamento, a fim de se avaliarem os níveis de frutose, ácido cítrico, potássio (K), sódio (Na), cálcio (Ca), Se, zinco (Zn), manganês (Mn), enxofre (S) e chumbo (Pb). O desenho estatístico foi um quadrado latino 5x5. Os diferentes níveis de suplementação de Se avaliados mantiveram as concentrações de eletrólitos e de minerais do sêmen nos níveis exigidos e não modificaram a qualidade espermática, concluindo-se que maiores ingestões de Se não causam efeitos antagônicos na absorção e subsequente ação de outros minerais essenciais fornecidos aos animais e ainda mantêm o equilíbrio eletrolítico.

ABSTRACT The aim of the study was to evaluate whether supplementation with different levels of selenium (Se) can change the biochemical and electrolytic components of semen, causing an improvement in seminal quality in rams. Thirty animals were kept in an intensive pen system, fed with hay and commercial ration, allocated into five groups (six animals/pen) and supplemented with a mineral mixture containing 0mg (G1), 5mg (G2), 10mg (G3), 15mg (G4) and 20mg (G5) of Se/kg. Each group received a different treatment every 56 days and treatments were rotated between groups following a dynamic sequence. Semen samples were collected by electroejaculation after the end of each treatment to evaluate the levels of fructose, citric acid, potassium (K), sodium (Na), calcium (Ca), Se, zinc (Zn), manganese (Mn), sulfur (S) and lead (Pb). The statistical design was a 5x5 Latin square. The different levels of Se supplementation evaluated maintained the concentrations of electrolytes and minerals in the semen at the required levels and did not change the sperm quality, concluding that higher intakes of Se do not cause antagonistic effects on the absorption and subsequent action of other essential minerals supplied to the animals and still maintains electrolyte balance.

Resumo A transformação do gesso em hidroxiapatita permite agregar valor a essa matéria-prima, pois a cerâmica obtida possui alto valor comercial em relação ao gesso, enquanto o polímero acrescenta propriedades de biocompatibilidade e bioatividade ao biocompósito. Assim, compósitos de hidroxiapatita/poli-hidroxibutirato foram preparados a partir do gesso/poli-hidroxibutirato, usando uma proporção em massa de 10% do polímero. O material foi obtido por meio de uma conversão química realizada em solução de hidrogenofosfato de amônio (0,5 mol.L-1) e meio alcalino (hidróxido de amônio 6,0 mol.L-1) para controle de pH. A reação ocorreu a 100 °C em diferentes tempos de teste. Análises de espectroscopia no infravermelho mostraram grupos funcionais característicos de hidroxiapatita após 36 h de reação; além disso, o biomaterial foi identificado como a fase majoritária em difratogramas de raios X. Microscopia eletrônica de varredura dos materiais antes e após a conversão mostrou uma clara mudança em suas morfologias, indicando o sucesso da síntese.

Abstract The transformation of the gypsum into hydroxyapatite allows added value to this raw material, because the ceramic obtained has a high commercial value in relation to gypsum, while the polymer adds biocompatibility and bioactivity properties to the biocomposite. Thus, hydroxyapatite/polyhydroxybutyrate composites were prepared from the gypsum/polyhydroxybutyrate, using a 10% mass ratio of the polymer. The material was obtained by means of a chemical conversion carried out in a solution of ammonium hydrogen phosphate (0.5 mol.L-1) and alkaline medium (ammonium hydroxide 6.0 mol.L-1) for pH control. The reaction occurred at 100 °C at different test times. Analyzes of infrared spectroscopy showed functional groups characteristic of hydroxyapatite after 36 h of reaction; in addition, the biomaterial was identified as the major phase in X-ray diffraction patterns. Scanning electron microscopy of the materials before and after conversion showed a clear change in their morphologies, indicating the success of the synthesis.

RESUMO O conhecimento do desenvolvimento mamário de um rebanho leiteiro é fundamental, pois relaciona-se à eficiência produtiva. Objetivou-se avaliar a associação dos parâmetros térmicos mamários com concentrações hormonais de búfalas em distintos estágios fisiológicos. Foram utilizadas 24 búfalas mestiças Murrah, em quatro grupos (n= 6): grupo 1 (bezerras), grupo 2 (novilhas), grupo 3 (gestantes) e grupo 4 (lactantes). A cada 28 dias, durante 4 meses, realizaram-se exames de termografia digital por infravermelho para verificar temperatura superficial dos corpos mamários craniais (CMCr) e caudais (CMC), das cisternas craniais (CGMCr) e caudais (CGMC) e tetas craniais (TGMCr) e caudais (TGMC). Foi aferida temperatura retal (TR) e colhido sangue para mensuração das concentrações plasmáticas do fator semelhante a insulina tipo-I, insulina (INS), hormônio do crescimento (GH), progesterona (P4) e estradiol. Grupos 1 e 2 apresentaram correlação de TR com CGMCr. No grupo 3, TR correlacionou-se com TGMCr, TGMC e concentrações plasmáticas de P4. No grupo 4, houve correlação de TR com CGMC, TGMCr e concentrações plasmáticas de INS e GH, e de TGMC com concentrações plasmáticas de GH. Nos quatro grupos, CGMCr correlacionou-se com CMCr e TGMCr, semelhantemente ao observado na porção caudal. Variações térmicas mamárias refletiram alterações fisiológicas aguardadas nos períodos avaliados.

ABSTRACT The knowledge of the mammary development of a dairy herd is key, since it is related to its productive efficiency. The objective of this study was to evaluate the association of mammary thermal parameters with hormonal concentrations of buffaloes at different physiological stages. Twenty-four Murrah crossbred buffaloes were used in four groups (n= 6): group 1 (calves), group 2 (heifers), group 3 (pregnant animals) and group 4 (lactating animals). Every 28 days, for 4 months, infrared digital thermography was performed to check the surface temperature of cranial (CrCM) and caudal (CCM) corpus mammae, cranial (CrC) and caudal (CC) cisterns and cranial (CrT) and caudal teats (CT). Rectal temperature (RT) was measured and blood was collected to measure plasma concentrations of insulin-like factor I, insulin (INS), growth hormone (GH), progesterone (P4) and estradiol. Groups 1 and 2 presented correlation of RT with CrC. In group 3, RT correlated with CrT, CT and plasma P4 concentrations. In group 4, there was correlation of RT with CC, CrT and plasma concentrations of INS and GH, and CT with plasma GH concentrations. In all four groups, CrC correlated with CrCM and CrT, similar to that observed in the caudal portion. The thermal changes in the mammary glands reflected the expected physiological changes in the evaluated periods.

Resumo Materiais compósitos com matriz de poli-hidroxibutirato e material de reforço de hidroxiapatita (PHB/HA) foram produzidos por moldagem a partir de prensagem em 100 MPa e 165 °C durante 30 min. A quantidade de reforço variou de 0 a 20% em massa para avaliar o efeito das partículas de HA nas propriedades mecânicas e na bioatividade dos compósitos. O aumento da quantidade de HA reduziu a resistência à compressão dos compósitos em aproximadamente 20%, enquanto a resistência à flexão diminuiu 30%. No entanto, a bioatividade após 14 dias de imersão em SBF foi melhorada com o aumento da quantidade de HA, sendo observada camada de apatita na superfície do compósito PHB/HA.

Abstract The composite materials using polyhydroxybutyrate as matrix and hydroxyapatite as reinforcement (PHB/HA) were produced by molding, using pressing at 100 MPa and 165 °C for 30 min. The amount of filler was varied from 0 to 20 wt% to evaluate the effect of the HA particles on mechanical properties and the bioactivity of the composites. The increase of the HA amount reduced the compressive strength of the composites nearly 20% while bending strength reduced nearly 30%. However, the bioactivity after 14 days immersion in SBF was improved with the increase of HA amount, with formation of apatite layer on the surface of the PHB/HA composite.

O objetivo do estudo foi avaliar o crescimento corporal e idade de início da puberdade em cordeiras sob duas dietas específicas para taxas de crescimento baixas e altas. Um rebanho de 20 cordeiras Bergamácia Brasileira foi dividido em dois grupos (n= 10) e mantido confinado em todo período experimental, sendo dispostos dois animais do mesmo tratamento/baia. Duas fases foram estabelecidas: Fase 1, a partir de 90 dias de idade até o início da puberdade, e Fase 2, a partir do início da puberdade até 1 ano de idade. Para a fase 1, duas dietas distintas foram formuladas, sendo: Tratamento A, formulada para obter um ganho de peso diário de aproximadamente 150g; e Tratamento B, para um ganho de peso médio diário de cerca de 250g. Na Fase 2, uma dieta equilibrada idêntica foi fornecida para ambos os grupos. A cada 14 dias, os animais foram pesados e calcularam-se o ganho médio diário, o consumo médio diário de matéria seca e escore de condição corporal. A partir do quinto mês de idade, em cada grupo, um macho vasectomizado foi usado para detectar estro, estabelecendo a idade de início da puberdade e estro para cada cordeira. As amostras de sangue foram coletadas a cada 28 dias para determinar a concentração plasmática de hormônio do crescimento. Cordeiras do tratamento B ganharam mais peso e tiveram maior escore de condição corporal (P<0,05), mas não houve diferença de idade para o início da puberdade e para os níveis plasmáticos de hormônio do crescimento (P>0,05). Verificou-se que os tratamentos A e B apresentaram desempenhos satisfatórios. Assim, o tratamento A pode ser indicado como um sistema de alimentação para alcançar respostas positivas em cordeiras submetidas ao confinamento durante a fase de crescimento.

The objective of the study was to evaluate body growth and age at onset of puberty on lambs fed two specific diets for low and high growth rates. A herd of 20 Brazilian Bergamasca lambs was divided in two groups (n= 10) and kept confined throughout the experimental period, two animals of the same treatment/pen. Two phases were established: Phase 1, from 90 days of age until the onset of puberty; and Phase 2, from puberty onset up to 1 year old. For Phase 1, two distinct diets were formulated, being: Treatment A, which was formulated to obtain an average daily gain of approximately 150g; and Treatment B, for an average daily gain of about 250g. In Phase 2, a balanced, equal diet was provided to both groups. Every 14 days, the animals were weighed and given average daily gain, average daily dry matter intake and body condition score. From the 5th month of age on, in each group, a vasectomized male was used to detect estrus, establishing age at puberty onset and estrus interval for each lamb. Blood samples were collected every 28 days to determine plasma growth hormone concentration. Treatment B lambs gained more weight and had higher body condition score (P<0.05) and there was no difference for age at puberty onset and plasma growth hormone levels (P>0.05) between treatments. It was found that both treatments showed satisfactory performances. Thus, treatment A may be indicated as a reasonable feeding system to achieve positive responses on confined ewe lambs during growth phase.

The economy of many communities in southeastern Brazil is based on agroindustry, particularly the sugarcane industry. Recent studies have found increased use of herbicides in this type of agriculture, among which diuron and hexazinone are the most widely used. The water supply for some communities is derived entirely from the Guarany Aquifer (the world's largest transborder underground freshwater system), and some wells are located in recharge zones, which makes the groundwater more vulnerable to contamination. In this study, we monitored some of the wells located in the recharge area. We studied the removal of diuron and hexazinone from synthetic water prepared in the laboratory by preoxidation with chlorine and chlorine dioxide, as well as adsorption with granular activated carbon (GAC). The saturation time of GAC in tests with preoxidation with both oxidants was shorter than the saturation time in the test without preoxidation, possibly due to the formation of by - products that competed for the adsorption of the herbicides. The conclusion was that the use of activated carbon is important for removing the herbicides in question, as well as the by - products produced by these oxidants.