Natural additives with antioxidant properties can be used as biodegradable and sustainable alternatives to synthetic products, because they can inhibit the biodiesel oxidation reaction, increasing oxidative stability and extending its storage period. This research evaluated the efficiency of jabuticaba peels, gabiroba leaves, and hibiscus flowers in ethanolic extracts, analyzing through the simplex-centroid design, the induction periods (IP) and rate constants (k) of the biodiesel oxidation reaction at 110 °C. Antioxidant activity was observed in all extracts, either decreasing k or increasing the IP. The mathematical models obtained showed coefficients of determination greater than 0.9400, a non-significant lack of fit at the 5% level, and low dispersion between predicted and experimental data, indicating that the 1st order reaction fit was appropriate and can be used for predictive purposes. In this work, the optimization was performed with maximization of IP and minimization of k showing that the mixture containing 25% of jabuticaba peels extract and 75% of gabiroba leaves extract was the most suitable, because proportionally increased the IP and decreased k of the biodiesel oxidation reaction. It is possible to suggest the use of jabuticaba peels extract or gabiroba leaves extract as well as various combinations between them as antioxidant additives. products period extracts simplexcentroid simplex centroid design (IP (k 11 C °C 09400 0 9400 0.9400 nonsignificant non significant 5 level data st purposes work 25 75 suitable 1 0940 940 0.940 2 7 094 94 0.94 09 9 0.9 0.

The objective of the present work was to apply self-organizing feature maps (SOFM) and multilayer perceptron (MLP) to evaluate the protective capacity of tert-butylhydroquinone (TBHQ), butylhydroxyanisole (BHA), and butylhydroxytoluene (BHT) antioxidants against the biodiesel oxidation reaction. For this, the antioxidant concentration and the biodiesel compliance parameters were used as continuous input variables and the type of antioxidant as a categorical. The SOFM proved to be an adequate tool for the classification of biodiesel samples containing antioxidants. The performance of the 5 most active networks of the model ranged from 89 to 99% for training, testing, and validation with an error below 1.42 × 10-4. Statistical tests applied to validate the model showed no significant difference between predicted and experimental values. The global sensitivity analysis showed that the relative protection factor (RPF) contributed with 34.89%, the antioxidant with 31.49%, the induction period with 10.69%, the water content with 6.00%, and the others all together with 16.93% in the construction of the regression models by MLP. selforganizing self organizing (SOFM MLP (MLP tertbutylhydroquinone tert butylhydroquinone TBHQ, TBHQ , (TBHQ) BHA, BHA (BHA) BHT (BHT reaction this categorical 8 99 training testing 142 1 42 1.4 104. 104 10 4. 4 10-4 values RPF (RPF 3489 34 34.89% 3149 31 49 31.49% 1069 69 10.69% 600 6 00 6.00% 1693 16 93 16.93 (TBHQ (BHA 9 14 1. 10- 348 3 34.89 314 31.49 106 10.69 60 0 6.00 169 16.9 34.8 31.4 10.6 6.0 16. 34. 31. 10. 6.

The simultaneous diffusion of inorganic components in the olive pulp in wet brine was modeled based on Fick’s generalized 2nd Law and simulated using the finite element method. The main and crossed diffusion coefficients, the film coefficient and the Biot number were determined, with the application of the simplex optimization method, through the minimization of the percentage errors. The errors between the simulated and experimental data were 5.35% for NaCl and 4.77% for KCl and the adjusted main diffusion coefficients were 0.4358 × 10-12 m2 s-1 for NaCl and 0.5408 × 10-12 m2 s-1 for KCl. The system developed to simulate diffusion allows the control and modulation of the salts content that diffuses through the olive pulp. Ficks Fick s nd method determined 535 5 35 5.35 477 4 77 4.77 04358 0 4358 0.435 1012 10 12 10-1 m s1 1 s- 05408 5408 0.540 53 3 5.3 47 7 4.7 0435 435 0.43 101 10- 0540 540 0.54 5. 4. 043 43 0.4 054 54 0.5 04 0. 05

This work compares the anticorrosive properties of DC electrodeposited CuCoNi, CuCo, and CuNi alloy coatings in a NaCl 0.5 mol L-1 solution. The results showed that j and the bath composition influenced the chemical, morphological, and electrochemical characteristics of the alloy coatings. Among all the studied coatings, the CuCo, CuNi, and CuCoNi ones produced at j = 10 A m-2, j = 60 A m-2, and j = 25 A m-2, respectively, showed the best anticorrosive performances in the saline medium, exhibiting charge transfer resistances (Rtc) higher than 2000 Ω cm2 and an electrical double layer capacitances (Cdl) lower than 8 X10-4 F cm-2. These results agree with the compact morphologies and smaller grain sizes presented by these coatings. Therefore, the anticorrosive properties of the coatings cannot be related only to the less noble metal(s) contents in the alloy but also to their morphologies. CuCo 05 0 5 0. L1 L 1 L- solution chemical morphological m2, m2 m 2, 2 m-2 6 respectively medium Rtc (Rtc 200 cm Cdl (Cdl X104 X X10 4 X10- cm2. 2. cm-2 Therefore metals metal s metal(s m- 20 X1 cm-

Olive samples were subjected to the salting process in brine containing 1196 mol m−3 of NaCl and 402 mol m−3 of KCl. Samples were collected during 60 h and salt concentration values were determined. With the finite element method (FEM) and the minimization of the errors percentage between the simulated and experimental values, the mass transfer coefficients in the film (hm) were obtained, being 1.0072 × 10−8 and 1.2499 × 10−8 for NaCl and KCl, respectively. The salts concentration at the olive/brine interface was simulated by FEM and analyzed via SOFM. A network with 4 × 4 topology and 10000 training epochs was used. It was observed that the influence of the stationary film formed on the surface of the olives during the salting process depends on the position, the salt involved in the diffusion and that the concentration of the salts, at each point, varies according to the immersion time. 119 m3 m 3 m− 40 KCl 6 determined (FEM hm (hm obtained 10072 1 0072 1.007 108 10 8 10− 12499 2499 1.249 respectively olivebrine olive SOFM 1000 used position point time 11 1007 007 1.00 1249 249 1.24 100 00 1.0 124 24 1.2 0 1. 12 2

Sodium chloride is used in the cheese salting process as it promotes sensory changes and food preservation. However, in excess can cause hypertension problems, and for this reason, it has been partially replaced by potassium chloride. In the present work, Prato cheese was subjected to joint diffusion of NaCl and KCl by immersion in static and stirred brine. The salt concentration values on the cheese surface were determined as a function of time. They were tabulated and presented to the self-organizing map (SOM)-type neural networks and the multilayer perceptron (MLP) for analysis and modeling of the film formed on the surface of the cheese during static and dynamic salting. The SOM network showed that the behavior of the diffusive process, on the surface of the cheese, depends on the analyzed position and that the points in which occupy similar positions, concerning the distance from the edge, have similar behavior. Regression models for NaCl and KCl were significant at the 5% level and can be used for predictive purposes.

The NaCl and KCl diffusion in the film formed on the cheese surface during salting was simulated by the finite element method. The time and salts concentration values on the cheese surface were determined, tabulated, and presented to the multilayer perceptron neural network (MLP) for the regression modeling. The samples were divided into 70, 15 and 15% for training, testing, and validation, respectively. The networks with the best performance showed 5 to 12 hidden layers. The Tukey’s test showed that there was no significant difference, at the 5% level, between the time value used and the mean value modeled for training, testing, and validation for the NaCl. For the KCl, a significant difference was observed only for 2 training samples and 1 test sample. Sensitivity analysis showed that the discrete variable Z, which represents the static and dynamic systems, was the most important in the models’ construction.

Abstract Glyphosate-Resistant Crops (GR crops) have caused considerable changes in weed management worldwide. In Brazil, GR cultivars of soybean and corn were officially introduced in the 2005/06 and 2011/12 crops, respectively. This technology has radically changed the weed management system, having an enormous impact on national agriculture. The objective of this review was to analyze the general aspects that led to the adoption of this technology in Brazil and present its future consequences and challenges. The adoption of GR soybean and corn was swift and comprehensive. Ten years after its introduction, GR soybean and corn are grown in most areas with these crops in Brazil. This success can be attributed to the reduction of costs, the broad spectrum of control provided by glyphosate, the solution for effective management resistance to ALS and ACCase inhibitors, the excellent managing of weeds that are difficult to control, the reduction of crop injury and carryover problems. However, the exclusive and consecutive use of glyphosate alone resulted in intense selection pressure for resistant weeds to this herbicide, which has become one of the most prominent challenges with these crops. Therefore, the future sustainability of GR soybean and corn will not be possible without the combination with other technologies, within integrated weed management.

Abstract Morus nigra L. has been widely used in Brazilian folk medicine for the treatment of diabetes. We evaluate the chemical composition and antidiabetic properties of the hexane (Hex-Mn) and chloroform (Chlo-Mn) fractions obtained by partition of the crude ethanolic extract from the leaves in rats. Chemical composition analysis of Hex-Mn and Chlor-Mn was performed by gas chromatography-mass spectrometry (CG-MS). In vivo and in vitro studies were carried out to compare the antidiabetic activities of the Hex-Mn and Chlor-Mn fractions. Most of the compounds identified in Hex-Mn were α-linolenic acid, stigmast-5-en-3-ol and linolenic acid ethyl ester, while in Chlor-Mn, stigmast-5-en-3-ol, palmitic acid and α-linolenic acid were mainly identified. Only Hex-Mn treatment reduced both fasting and postprandial hyperglycemia. Additionally, Hex-Mn preserved body weight gain, preserved the hepatic glycogen content, and also reduced the thiobarbituric acid reactive substances and nitrite levels, as well as restored the superoxide dismutase. Furthermore, digestion of complex carbohydrates and intestinal glucose absorption was prevented by Hex-Mn treatment. Our results suggest that the antidiabetic activity of Hex-Mn may be explained, at least in part, by the insulin sensitivity increase, antioxidant properties and reduction in carbohydrate absorption in the small intestine.

RESUMO: Uma das formas de se estudar a laminite bovina é sua indução experimental por meio do fornecimento de grande quantidade de carboidrato de alta fermentação. O protocolo mais eficaz até o momento foi o uso de oligofrutose. Objetivou-se avaliar aspectos clínicos e histológicos dos dígitos de bovinos na indução experimental de acidose ruminal e laminite usando oligofrutose. Utilizaram-se seis bezerros mestiços (Bos taurus x Bos indicus) de um ano, divididos em Grupo I (GI) e Grupo II (GII). Os animais em GI e GII receberam oligofrutose por via intrarruminal nas doses de 13 e 17g/kg respectivamente. Os bovinos foram avaliados clinicamente por 28 horas e fragmentos de coroa e muralha abaxial dos dígitos foram colhidos para histologia 30 horas após a indução. Foram identificados sinais de acidose ruminal e metabólica como distensão ruminal com líquido, diarreia e baixo pH ruminal. Os resultados de hemogasometria indicaram baixos pH e nível plasmático de bicarbonato. Os animais não apresentaram claudicação, entretanto, observaram-se apatia e marcha mais lenta, atribuídas à acidose metabólica. Histologicamente foram observadas lesões indicativas de laminite como alterações circulatórias e infiltrado inflamatório na derme, irregularidades e áreas de destacamento da membrana basal e alterações morfológicas de células da epiderme basal. O protocolo induziu, nas primeiras 30 horas, sinais de acidose ruminal e metabólica e lesões histológicas de baixa intensidade nos dígitos. Não foi observada claudicação ou sensibilidade nos dígitos, caracterizando a fase prodrômica da enfermidade.

ABSTRACT: One of the ways to study cattle laminitis is its experimental induction by supplying a large amount of high fermentation carbohydrate. The most effective protocol until now has been the use of oligofructose. The objective of this study was to evaluate clinical and histological aspects of the hoof in experimental induction of ruminal acidosis and laminitis in calves using oligofructose. Six crossbred (Bos taurus x Bos indicus) yearling calves divided into Group I (GI) and Group II (GII) were used. Animals in GI and GII received intraruminal oligofructose in doses of 13 and 17g/kg, respectively. During 28 hours the calves were clinically evaluated and 30 hours after induction, samples were taken from coronary and abaxial wall of the hoof for histologic evaluation. Were noticed signs of ruminal and metabolic acidosis like rumen distension with fluid, diarrhea, ruminal pH reduction and, at blood gas analysis, pH and bicarbonate below reference range. Lameness was not observed however, some animals had a slower gait and apathy, possibly due to metabolic acidosis, though. Histologically, typical lesions of laminitis like circulatory changes and inflammatory infiltrate in the dermis, irregularities and areas of detachment at basement membrane and morphologic changes in cells from basal epidermis were found. The protocol induced, in the first 30 hours, clinical signs of ruminal and metabolic acidosis and low grade histologic lesions in the digits. Lameness and digit pain were not observed, characterizing the prodromic phase of the disease.

O estudo morfométrico dos dígitos de bovinos e bubalinos pode colaborar para o entendimento da etiopatogenia das enfermidades podais. Este estudo objetivou descrever as características morfométricas dos dígitos de bovinos das raças Curraleira (Bos taurus), Pantaneira (Bos taurus), Nelore (Bos indicus) e de bubalinos (Bubalus bubalis) da raça Murrah e estabelecer possível relação entre tais medidas e a ocorrência de enfermidades digitais. Na pesquisa foram utilizados dez animais, saudáveis, de cada raça e espécie. Foram avaliados dois membros de cada animal, sendo um torácico e outro pélvico, totalizando 80 extremidades distais. As medidas morfométricas foram obtidas com auxílio de um paquímetro mecânico graduado e os ângulos das pinças conferidos por meio de transferidor metálico. Os principais parâmetros digitais avaliados foram o ângulo dorsal do casco (A), comprimento da parede dorsal (B), altura do talão (C), altura da pinça (D), comprimento do casco (E), comprimento diagonal do casco (F), largura do dígito lateral (G), largura do dígito medial (H), comprimento do dígito lateral (I) e comprimento do dígito medial (J). Para a comparação de médias dos resultados obtidos entre as raças foi utilizado o teste de Tukey (p<0,05). A análise multivariada para as representações gráficas das variáveis canônicas foi empregada para expressar a similaridade das medidas estudadas entre os grupos, no qual se utilizou o software R. Os resultados revelaram que os bubalinos apresentam as maiores medidas morfométricas para as variáveis B, C, D, E, F, G, H, I e J e apenas na variável A apresentaram medidas inferiores entre as diferentes raças de bovinos estudadas. Existe similaridade entre as três raças de bovinos estudadas em relação às variáveis, altura da pinça (D), largura do dígito lateral (G) e largura do dígito medial (H) as quais se distanciam dos valores encontrados para essas variáveis nos bubalinos, Concluiu que a morfometria digital pode influenciar na ocorrência de enfermidades digitais, mas não age como fator isolado, necessitando da interação com outros fatores estruturais, ambientais e de manejo para a manifestação dessas doenças.

Morfometric studies of bovine and buffalo digits can help to understand the etiopathogeny of digital diseases. This study described morphometric characteristics of digits of Curraleira (Bos taurus), Pantaneira (Bos taurus) Nelore (Bos indicus) breeds of cattle and Murrah buffalo (Bubalus bubalis) and stablish possible relation among the parameters and digital infirmities. Were used ten animals of each breed and specie. Two limbs were evaluated, a toracic and a pelvic, in a total of 80 distal limbs. Morphometric measurements were obtained using a graduated paquimeter and angles using a metallic protactor. The main parameters evaluated were hoof dorsal angle (A), dorsal wall length (B), heel height (C), toe height (D), hoof length (E), hoof diagonal hoof (F), lateral digit width (H), medial digit width (I) and medial digit length (J). For results averages comparison among breeds were used Tukey test (p<0,05). Multivariate analysys for graphic representations of canonic variables was used to express similarity of measures studied among groups, using R software. Results shows tha bubaline present higher morphometric measures for the variables B, C, D, E, F, G, H, I and J, only for variable A presented lower measures comparing the bovine breeds studied. There is similarity between the three breeds of cattle studied about toe height (D), lateral digit width (G) and medial digit width (H), which differed of values observed in buffalo. It was concluded that digital morphometry can influence the occurence of digital infirmities, but doesn´t act as an isolated factor, needing interaction of other structural, environmental and management factors for its occurence.

Eletrocatalisadores Pd/C, Au/C e PdAu/C com diferentes razões atômicas foram preparados utilizando-se irradiação por feixe de elétrons e testados na oxidação eletroquímica de glicerol em uma célula alcalina a glicerol direto (ADGFC). Os difratogramas de raios X (XRD) evidenciaram a presença de fases ricas em Pd (fcc) e Au (fcc). As análises de voltametria cíclica (CV) e cronoamperometria indicaram que o eletrocatalisador com razão atômica 50:50 demonstrou atividade superior para a oxidação eletroquímica do glicerol a temperatura ambiente. As análises de infravermelho com transformada de Fourier no modo de refletância total atenuada (ATR-FTIR) in situ identificaram como principais produtos da oxidação eletroquímica do glicerol: 1,3-diidroxi-2-propanona, gliceraldeído e glicolato. Os experimentos em célula unitária foram realizados entre 50 e 90 ºC e foi constatado que o melhor desempenho aconteceu a 80 ºC.

Pd/C, Au/C and PdAu/C electrocatalysts with different atomic ratios prepared using electron beam irradiation were tested for glycerol electrooxidation in single alkaline direct glycerol fuel cell (ADGFC). X-ray diffractograms (XRD) of PdAu/C electrocatalysts showed the presence of Pd (fcc) and Au (fcc) phases. Cyclic voltammetry (CV) and chronoamperometry showed that PdAu/C electrocatalyst with Pd:Au atomic ratio of 50:50 demonstrated superior activity for glycerol electrooxidation, at room temperature. In situ Fourier transform infrared spectroscopy by attenuated total reflectance (ATR-FTIR) experiments were performed for the electrocatalysts, identifying oxalate, glycerate ion, 1,3-dihydroxy-2-propanone, glyceraldehyde and glycolate as products of glycerol electrooxidation. Experiments with single ADGFC were carried out from 50 to 90 ºC, using Pd/C electrocatalyst; the best performance was obtained at 80 ºC.

A relação entre o NaCl e a hipertensão arterial tem estimulado a sua substituição parcial por KCl em queijos. Entretanto, para manter a qualidade final do produto, é de suma importância assegurar uma proporção adequada de NaCl/KCl, bem como a distribuição homogênea destes sais. Os modelos que estimam a concentração salina, portanto, são valiosas ferramentas para o controle de qualidade. Para simular a difusão multicomponente durante a salga em salmoura estática, foi proposto um modelo unidimensional, baseado na solução analítica da 2ª lei de Fick generalizada para dois solutos. A solução analítica, implementada através de um algoritmo computacional, permitiu o ajuste dos coeficientes de difusão e a avaliação da resistência externa. Os resultados da simulação obtidos apresentaram boa concordância com os valores experimentais (desvio de 2,7% para o NaCl e 6,6% para o KCl), validando a capacidade preditiva do modelo proposto. Além disso, a simulação pode permitir um ajuste de ganhos de produtividade (redução do tempo de salga) através da estimativa do tempo de salga para teores salinos desejados.

The relation between NaCl and arterial hypertension has stimulated a partial substitution for KCl on cheese. However, it is very important to guarantee an adequate proportion of NaCl/KCl, and also the homogeneous distribution of these salts, to maintain the final quality of the product. Therefore, the models that calculate the salty concentration are useful tools to control the quality. In this study an analytic resolution of Fick's 2nd law, generalized for two salts, was used to simulate the salting in stationary brine. The analytic resolution, carried out through a computer program, allowed an adjustment of the diffusion coefficients and to evaluate the external resistance. The results calculated show a close comparison of the experimental values (an deviation of 2.7% to NaCl and 6.6% to KCl), validating the proposed model. The simulation can be used to adjust productivity (reducing the salting time) through the salting-time calculation for a required saltiness.