Abstract L-Asparaginase (L-ASNase) is a biopharmaceutical used for acute lymphoblastic leukaemia (ALL) treatment, dramatically increasing the patients’ chance of cure. However, its production and distribution in developing countries were disrupted because of its low profitability, which caused great concern among patients. This study evaluates the feasibility of combining fractional precipitation and aqueous two-phase systems (ATPS) to purify L-ASNase from a low-grade product, commercially known as Acrylaway® L. The ATPS purification results were not particularly expressive compared to the two-step purification process composed of ethanol precipitation and gel filtration, which was able to recover the target molecule with a purification factor over 5 fold. Thus, we studied a purification process capable of manufacturing pharmaceutical grade L-ASNase from a commercially available low-grade raw material; however, improvements regarding its throughput must be achieved, and high purity is the first step to apply it as a new biopharmaceutical product. The proposed process could pose as a short-time solution to mitigate its shortage while a cost-effective production plant is being developed.

ABSTRACT Objectives: Prostate cancer is the most common and fatal cancer amongst Brazilian males. The quality of prostate cancer care in Brazil was systematically reviewed and compared to United Kingdom (UK) National Institute for Health and Care Excellence (NICE) guidelines, which are considered an international benchmark in care, to deter- mine any treatment gaps in Brazilian practice. Materials and Methods: A systematic review of Brazilian and UK literature was under- taken. Additionally, quality of life scores was measured using a FACT-P questionnaire of 36 prostate cancer patients attending the Farmácia Universitária da Universidade de São Paulo (FARMUSP). These scores were compared against NICE care measures for patient safety, clinical efficacy and quality of life indicators determined by either quantitative or qualitative methods. Key findings: The quality of prostate cancer care in Brazil was considered good when compared to NICE guidelines. However, FACT-P data strongly indicated a poor under- standing of treatment received by Brazilian patients and that their mental health needs were not being met. Conclusions: NICE quality statements that address the holistic needs of patients should be implemented into Brazilian outpatient care plans. Addressing the non-medical concerns of patients may improve quality of life and can be easily rolled-out through existing Brazilian pharmacy services at no financial cost to the Brazilian Unified Health System (SUS).

ABSTRACT The growth of yeasts in culture media can be affected by many factors. For example, methanol can be metabolized by other pathways to produce ethanol, which acts as an inhibitor of the heterologous protein production pathway; oxygen concentration can generate aerobic or anaerobic environments and affects the fermentation rate; and temperature affects the central carbon metabolism and stress response protein folding. The main goal of this study was determine the implication of free fatty acids on the production of heterologous proteins in different culture conditions in cultures of Pichia pastoris. We evaluated cell viability using propidium iodide by flow cytometry and thiobarbituric acid reactive substances to measure cell membrane damage. The results indicate that the use of low temperatures and low methanol concentrations favors the decrease in lipid peroxidation in the transition phase from glycerol to methanol. In addition, a temperature of 14 ºC + 1%M provided the most stable viability. By contrast, the temperature of 18 ºC + 1.5%M favored the production of a higher antibody fragment concentration. In summary, these results demonstrate that the decrease in lipid peroxidation is related to an increased production of free fatty acids.

Abstract Nowadays, it is necessary to search for different high-scale production strategies to produce recombinant proteins of economic interest. Only a few microorganisms are industrially relevant for recombinant protein production: methylotrophic yeasts are known to use methanol efficiently as the sole carbon and energy source. Pichia pastoris is a methylotrophic yeast characterized as being an economical, fast and effective system for heterologous protein expression. Many factors can affect both the product and the production, including the promoter, carbon source, pH, production volume, temperature, and many others; but to control all of them most of the time is difficult and this depends on the initial selection of each variable. Therefore, this review focuses on the selection of the best promoter in the recombination process, considering different inductors, and the temperature as a culture medium variable in methylotrophic Pichia pastoris yeast. The goal is to understand the effects associated with different factors that influence its cell metabolism and to reach the construction of an expression system that fulfills the requirements of the yeast, presenting an optimal growth and development in batch, fed-batch or continuous cultures, and at the same time improve its yield in heterologous protein production.

Polymeric vesicles known as polymersomes are formed by the self-assemble of amphiphilic block copolymers and have structural organization similar to liposomes. However, polymersomes present higher physicochemical stability and structure versatility due to their polymeric nature. In this review we describe the main aspects related to the structure and applications of these systems for drug delivery.

Abstract Antibodies and antibody fragments are nowadays among the most important biotechnological products, and Pichia pastoris is one of the most important vectors to produce them as well as other recombinant proteins. The conditions to effectively cultivate a P. pastoris strain previously genetically modified to produce the single-chain variable fragment anti low density lipoprotein (-) under the control of the alcohol oxidase promoter have been investigated in this study. In particular, it was evaluated if, and eventually how, the carbon source (glucose or glycerol) used in the preculture preceding cryopreservation in 20% glycerol influences both cell and antibody fragment productions either in flasks or in bioreactor. Although in flasks the volumetric productivity of the antibody fragment secreted by cells precultured, cryopreserved and reactivated in glycerol was 42.9% higher compared with cells precultured in glucose, the use of glycerol in bioreactor led to a remarkable shortening of the lag phase, thereby increasing it by no less than thrice compared to flasks. These results are quite promising in comparison with those reported in the literature for possible future industrial applications of this cultivation, taking into account that the overall process time was reduced by around 8 h.

The main aim of this study was to develop scaffolds based on alginate, chitosan and hybrid fibers with and without glycerol. The scaffolds developed underwent assessments for tensile property, swelling ratio and weight loss, cellular viability, degradation and biomineralization, as well as DSC/TGA thermal analysis. Tenacity values showed that use of glycerol and the interaction between alginate and chitosan as a hybrid fiber were associated with increasing tenacity values. In the swelling and weight loss study, the scaffolds containing glycerol presented lower weight loss and higher water absorption values in all scaffolds, compared to scaffolds without glycerol, indicating that glycerol acted as a stabilizer. None of the alginate, chitosan and hybrid scaffolds, with or without glycerol, decreased cell viability. On the third day of the biomineralization assay, chitosan without glycerol indicated the presence of apatite crystals. The degradation study showed that glycerol may have acted as a stabilizer.

ABSTRACT The use of biopharmaceuticals dates from the 19th century and within 5-10 years, up to 50% of all drugs in development will be biopharmaceuticals. In the 1980s, the biopharmaceutical industry experienced a significant growth in the production and approval of recombinant proteins such as interferons (IFN α, β, and γ) and growth hormones. The production of biopharmaceuticals, known as bioprocess, involves a wide range of techniques. In this review, we discuss the technology involved in the bioprocess and describe the available strategies and main advances in microbial fermentation and purification process to obtain biopharmaceuticals.

Proteases hydrolyze the peptide bonds of proteins into peptides and amino acids, being found in all living organisms, and are essential for cell growth and differentiation. Proteolytic enzymes have potential application in a wide number of industrial processes such as food, laundry detergent and pharmaceutical. Proteases from microbial sources have dominated applications in industrial sectors. Fungal proteases are used for hydrolyzing protein and other components of soy beans and wheat in soy sauce production. Proteases can be produced in large quantities in a short time by established methods of fermentation. The parameters such as variation in C/N ratio, presence of some sugars, besides several other physical factors are important in the development of fermentation process. Proteases of fungal origin can be produced cost effectively, have an advantage faster production, the ease with which the enzymes can be modified and mycelium can be easily removed by filtration. The production of proteases has been carried out using submerged fermentation, but conditions in solid state fermentation lead to several potential advantages for the production of fungal enzymes. This review focuses on the production of fungal proteases, their distribution, structural-functional aspects, physical and chemical parameters, and the use of these enzymes in industrial applications.

The selection of new microorganisms able to produce antimicrobial compounds is hoped for to reduce their production costs and the side effects caused by synthetic drugs. Clavulanic acid is a β-lactam antibiotic produced by submerged culture, which is widely used in medicine as a powerful inhibitor of β-lactamases, enzymes produced by bacteria resistant to antibiotics such penicillin and cephalosporin. The purpose of this work was to select the best clavulanic acid producer among strains of Streptomyces belonging to the Microorganism Collection of the Department of Antibiotics of the Federal University of Pernambuco (DAUFPE). Initially, the strains were studied for their capacity to inhibit the action of β-lactamases produced by Klebsiella aerogenes ATCC 15380. From these results, five strains were selected to investigate the batch kinetics of growth and clavulanic acid production in submerged culture carried out in flasks. The results were compared with the ones obtained by Streptomyces clavuligerus ATCC 27064 selected as a control strain. The best clavulanic acid producer was Streptomyces DAUFPE 3060, molecularly identified as Streptomyces variabilis, which increased the clavulanic acid production by 28% compared to the control strain. This work contributes to the enlargement of knowledge on new Streptomyces wild strains able to produce clavulanic acid by submerged culture.

Fungal infections have become a major problem of worldwide concern. Yeasts belonging to the Candida genus and the pathogenic fungus Cryptococcus neoformans are responsible for different clinical manifestations, especially in immunocompromised patients. Antifungal therapies are currently based on a few chemotherapeutic agents that have problems related to effectiveness and resistance profiles. Microemulsions are isotropic, thermodynamically stable transparent systems of oil, water and surfactant that can improve the solubilization of lipophilic drugs. Taking into account the need for more effective and less toxic drugs along with the potential of thiophene derivatives as inhibitors of pathogenic fungi growth, this study aimed to evaluate the antifungal activity of a thiophene derivative (5CN05) embedded in a microemulsion (ME). The minimum inhibitory concentration (MIC) was determined using the microdilution method using amphotericin B as a control. The formulations tested (ME- blank and ME-5CN05) showed physico-chemical properties that would allow their use by the topical route. 5CN05 as such exhibited moderate or weak antifungal activity against Candida species (MIC = 270-540 µg.mL-1) and good activity against C. neoformans (MIC = 17 µg.mL-1). Candida species were susceptible to ME-5CN05 (70-140 µg.mL-1), but C. neoformans was much more, presenting a MIC value of 2.2 µg.mL-1. The results of this work proved promising for the pharmaceutical industry, because they suggest an alternative therapy against C. neoformans.

Pichia pastoris is a methylotrophic yeast used as an efficient expression system for heterologous protein production as compared to other expression systems. Considering that every cell must respond to environmental changes to survive and differentiate, determination of endogenous protein related to heat stress responses and hypoxia, it would necessary to establish the temperature and methanol concentration conditions for optimal growth. The aim of this study is characterize the culture conditions through the putative biomarkers in different conditions of temperature and methanol concentration. Three yeast cultures were performed: 3X = 3% methanol -10 °C, 4X = 3% methanol -30 °C, and 5X = 1% methanol -10 °C. The expression level of HIF-1α, HSF-1, HSP-70 and HSP-90 biomarkers were measured by Western blot and in situ detection was performed by immunocytochemistry. The western blot results of HIF-1α and HSP-90 did not indicate statistically significant in the culture conditions studied. Respect to biomarkers location, HIF-1α and HSP-90 presented differences between cultures. In conclusion, the results suggest the cultures in a hypoxic condition produce a high density and yeast cells smaller. Beside the high density would not necessary related with a high production of recombinant proteins in modified-genetically P. pastoris.

Safety issues related to the employment of synthetic colorants in different industrial segments have increased the interest in the production of colorants from natural sources, such as microorganisms. Improved cultivation technologies have allowed the use of microorganisms as an alternative source of natural colorants. The objective of this work was to evaluate the influence of some factors on natural colorants production by a recently isolated from Amazon Forest, Penicillium purpurogenum DPUA 1275 employing statistical tools. To this purpose the following variables: orbital stirring speed, pH, temperature, sucrose and yeast extract concentrations and incubation time were studied through two fractional factorial, one full factorial and a central composite factorial designs. The regression analysis pointed out that sucrose and yeast extract concentrations were the variables that influenced more in colorants production. Under the best conditions (yeast extract concentration around 10 g/L and sucrose concentration of 50 g/L) an increase of 10, 33 and 23% respectively to yellow, orange and red colorants absorbance was achieved. These results show that P. purpurogenum is an alternative colorants producer and the production of these biocompounds can be improved employing statistical tool.

Pichia pastoris is methylotrophic yeast used as an efficient expression system for heterologous protein production. In order to evaluate the effects of temperature (10 and 30 °C) and methanol (1 and 3% (v/v)) on genetically-modified Pichia pastoris, different biomarkers were evaluated: Heat stress (HSF-1 and Hsp70), oxidative stress (OGG1 and TBARS) and antioxidant (GLR). Three yeast cultures were performed: 3X = 3% methanol-10 °C, 4X = 3% methanol-30 °C, and 5X = 1% methanol-10°C. The expression level of HIF-1α, HSF-1, HSP-70 and HSP-90 biomarkers were measured by Western blot and in situ detection was performed by immunocytochemistry. Ours results show that at 3% methanol -30 °C there is an increase of mitochondrial OGG1 (mtOGG1), Glutathione Reductase (GLR) and TBARS. In addition, there was a cytosolic expression of HSF-1 and HSP-70, which indicates a deprotection against nucleolar fragmentation (apoptosis). On the other hand, at 3% methanol -10 °C and 1% and at methanol -10 °C conditions there was nuclear expression of OGG1, lower levels of TBARS and lower expression of GLR, cytosolic expression of HSF-1 and nuclear expression HSP-70. In conclusion, our results suggest that 3% methanol-30 °C is a condition that induces a strong oxidative stress and risk factors of apoptosis in modified-genetically P. pastoris.

Estabilidade de enzimas é uma questão fundamental em indústrias biotecnológicas, farmacêuticas e cosméticas. As investigações sobre o assunto têm chamado a atenção por sua aplicação prática. A bromelina é uma tiol-endopeptidase, obtida a partir do abacaxi (Ananas comosus). É conhecida por suas aplicações clínicas e terapêuticas, especialmente para desbridamento seletivo de queimaduras, melhoria de ações antibiótica e de atividades anti-inflamatórias. Até o momento, a utilização da bromelina em aplicações farmacológicas industriais é limitada, devido à disponibilidade comercial, os custos, a sensibilidade ao pH e temperatura. Portanto, a maior compreensão da estabilidade desta enzima seria de grande interesse. O objetivo deste estudo foi avaliar a estabilidade da atividade da bromelina em vários pH (2,0 a 8,0) e em soluções de polietilenoglicol e de ácido poliacrílico. Observamos que a bromelina foi capaz de manter a sua estabilidade em pH 5.0, em todas as temperaturas estudadas. Soluções de PEG aumentaram a estabilidade da bromelina, enquanto que soluções de PAA obtiveram efeito oposto.

Enzyme stability is critical in biotechnology, pharmaceutical and cosmetic industries. Investigations on this subject have drawn attention because of its practical application. Bromelain is a thiol-endopeptidase, obtained from pineapple (Ananas comosus), known for its clinical and therapeutic applications, particularly to selective burn debridement and improvement of antibiotic action and anti-inflammatory activities. To date, the use of bromelain in pharmacological or industrial applications is limited, due to commercial availability, costs, and sensitivity to pH and temperature. Therefore, a better understanding of enzyme stability would be of great interest. The aim of this study was to evaluate bromelain activity and stability in several pH (2.0 to 8.0) and in polyethylene glycol and polyacrylic acid solutions. We observed that bromelain was able to maintain its stability at pH 5.0 for the temperatures studied. PEG solutions increased bromelain stability, but PAA solutions had the opposite effect.