Resumo O objetivo deste estudo foi avaliar in vitro a influência do extrato de gengibre 20% na resistência adesiva de pinos de fibra de vidro cimentados com cimentos resinosos convencional ou autocondicionantes. Quarenta e oito raízes bovinas foram padronizadas (17±0.5mm) e aleatoriamente divididas em dois grupos (n=24), de acordo com o irrigante utilizado durante o preparo biomecânico: NaOCl: hipoclorito de sódio 1%; e GEN: extrato glicólico de gengibre 20%. Os canais radiculares foram preparados e aleatoriamente distribuídos em dois subgrupos (n=12), conforme o protocolo de cimentação: autocondicionante (RelyX U200) e convencional (RelyX ARC). Após 48 h, as raízes foram seccionadas perpendicularmente (4 no terço cervical e 3 no terço médio) e submetidas ao teste de resistência adesiva push-out (50 kgf carga, 1.0 mm/min). O modo de falha foi analisado em MEV e estereomicroscopia. Os dados foram analisados pelos testes ANOVA 3-fatores e Tukey (p<0.05). ANOVA mostrou que não houve diferenças significativas entre U200 (2.01±0.17)B e ARC (1.93±0.12)B no grupo GEN, e no terço cervical para ambos os irrigantes (2.69±0.16A and 2.54±0.17A, respectivamente). O terço médio apresentou menor resistência adesiva que o terço cervical, independente do irrigante. Em geral, o terço cervical, independentemente do irrigante empregado, e a associação entre NaOCl e ARC apresentaram melhores desempenhos adesivos.

Abstract The aim of this study was to evaluate in vitro the influence of 20% glycolic ginger extract on the bond strength of glass-fiber post cemented with etch-and-rinse or self-etching resin cement. Forty-eight bovine roots were standardized (17±0.5 mm) and randomly divided into two groups, according to irrigant used during biomechanical preparation: NaOCl: 1% sodium hypochlorite and GEN: 20% glycolic ginger extract. Root canal was prepared and randomly assigned to one of two subgroups (n=12), according to luting protocol: self-etching (RelyX U200) and etch-and-rinse (RelyX ARC). After 48 h, the roots were sectioned perpendicularly (4 in cervical third and 3 in middle third) and submitted to push-out bond strength test (50 kgf load cell, 1.0 mm/min). Failure mode was analyzed in SEM and stereomicroscopy. Data were analyzed by three-way ANOVA and Tukey tests (p<0.05). ANOVA revealed that there were no significant differences between U200 (2.01±0.17)B and ARC (1.93±0.12)B in GEN group, and at the cervical third for both irrigants, 2.69±0.16A and 2.54±0.17A, respectively. Middle third showed lower bond strength than cervical third, regardless the irrigant. Overall, the cervical third regardless the irrigant employed and the association between NaOCl and ARC, presented better adhesive performance.

Abstract Objective: This study evaluated the influence of porcelain (VM9, VITA Zahnfabrik, Germany) thickness on the flexural strength and crack propagation in bilayered zirconia systems (YZ, VITA Zahnfabrik, Germany). Material and Methods: Thirty zirconia bars (20.0x4.0x1.0 mm) and six zirconia blocks (12.0x7.5x1.2 mm) were prepared and veneered with porcelain with different thickness: 1 mm, 2 mm, or 3 mm. The bars of each experimental group (n=10) were subjected to four-point flexural strength testing. In each ceramic block, a Vickers indentation was created under a load of 10 kgf for 10 seconds, for the propagation of cracks. Results: The results of flexural strength were evaluated by One-way ANOVA and Tukey's test, with a significance level of 5%. The factor “thickness of the porcelain” was statistically significant (p=0.001) and the l-mm group presented the highest values of flexural strength. The cracks were predominant among the bending specimens with 1 and 2 mm of porcelain, and catastrophic failures were found in 50% of 3-mm-thick porcelain. After the indentation of blocks, the most severe defects were observed in blocks with 3-mm-thick porcelain. Conclusion: The smallest (1 mm) thickness of porcelain on the zirconia infrastructure presented higher values of flexural strength. Better resistance to defect propagation was observed near the porcelain/ zirconia interface for all groups. Higher flexural strength was found for a thinner porcelain layer in a bilayered zirconia system. The damage caused by a Vickers indentation near and far the interface with the zirconia shows that the stress profiles are different.

Knowledge on internal dental morphology is extremely important to the correct execution of the treatment and modeling of root canals. The aim of the present study was to analyze, "in vitro", the configuration of the canal system in the mesial root of 180 maxillary first molars obtained from a Brazilian sample. The teeth diaphanized in order to confirm the presence of the MB2 canal and to determine the internal anatomy. Only in 41 % of the teeth the orifice of MB2 canal emerged from the pulp chamber floor. Among teeth two apical foramina were found in 23.3 %, a single apical foramen was observed in 15,5 % and three apical foramina were present in 2,2 %. Considering the hole sample, the MB2 canal was observed in 65.4 %, merged with the MB1 or branching from the MB1 or even independent all the way. In 55.1 % of the teeth a single orifice stemmed from the pulp chamber floor. A single apical foramen was found in 43,5 % of these cases, two apical foramina were present in approximately 12 % and apical delta was found in 0,5 % of the specimens. Three orifices which emerged from the pulpal floor were observed in 1.1 % of the sample. Paths considered very atypical were observed at 2.8 % of the teeth. The MB root canal anatomy was complex. The frequency of occurrence of the bifurcated or double canal, isthmus, accessory canals and apical delta must be taken into consideration as a possible cause of otherwise unexplained failure during endodontic treatment of first maxillary molars.

El conocimiento de la morfología dental interna es muy importante para la correcta ejecución del tratamiento de conductos radiculares. El objetivo del presente estudio fue analizar "in vitro", la configuración del sistema de canales en la raíz mesiobucal del 180 primeros molares maxilares obtenidos de una muestra brasileña. Mediante el uso de la diafanización de los dientes se confirmó la presencia del canal MB2 y su anatomía interna. Solamente 41 % de los dientes el canales MB2 emergió desde el piso de la cámara pulpar. De estos dientes fueron encontrados dos forámenes apicales en 23,3 %, un solo foramen apical en 15,5 % y tres forámenes apicales estaban presentes en el 2,2 %. Teniendo en cuenta la totalidad de la muestra, 65,4 % presentaron el MB2; que se fusionó con el MB1, a veces se observó como una rama de este canal, o sigue siendo independiente hasta el final. En 55,1 % de los dientes un solo foramen provenía del piso de la cámara pulpar. Un solo foramen apical se encontró en 43,5 % de estos casos, dos forámenes apicales estaban presentes en aproximadamente el 12 % y el delta apical se encontró en 0,5 % de los especímenes. Tres canal a partir del piso pulpar se observaron en 1,1 % de la muestra. Caminos considerados muy atípicos se observaron a 2,8 % de los dientes. La morfología del sistema de canales radiculares en la raíz MB de los primeros molares maxilares es compleja y variable. La alta frecuencia de canal MB2, bien como la presencia del canal bifurcado o doble, istmo, conductos accesorios y delta apical deben tenerse en cuenta como posible causa de la falla de otro modo inexplicable durante el tratamiento endodóntico de los primeros molares maxilares.

RESUMO Objetivo: Avaliar o efeito da escovação simulada usando creme dental com flúor e Aloe vera em lesão de mancha branca artificial in vitro, através da análise da microdureza Knoop (KHN). Métodos: Amostras de esmalte bovino (2 mm/diâmetro e 2 mm/altura) foram preparados e imersos em solução artificial de cárie por 24 h. O preparo para indução de lesão de mancha branca foi realizado por processo de ciclagem de pH. As amostras foram aleatoriamente divididas em dois grupos (n=20), de acordo com o dentifrício utilizado: creme dental contendo flúor (Colgate Total 12) ou creme dental à base de Aloe vera (Forever Bright Aloe Vera Toothgel). A superfície das amostras foi submetida à 10.000, 25.000, 50.000 e 100.000 ciclos de escovação simulada (200 g/peso) em uma máquina de escovação. A análise de microdureza (KHN) foi realizada inicialmente, após o período de imersão em solução artificial de mancha branca e após 10.000, 25.000, 50.000 e 100.000 ciclos de escovação. Os dados foram submetidos aos testes RM-ANOVA dois fatores e Tukey (p=0.05). Resultados: Os valores de KHN aumentaram significantemente após os ciclos de escovação, quando comparado aos valores após a imersão em solução desmineralizante. Não houve diferenças estatisticamente significantes entre os cremes dentais (p=0.263). Entretanto, em relação aos ciclos de escovação, houve diferenças significantes (p=0001). Conclusão: Os cremes dentais (contendo flúor ou Aloe vera) foram efetivos no aumento da microdureza superficial em lesão artificial de mancha branca.

ABSTRACT Objective: The aim of this study was to evaluate the effects of toothbrushing using a fluoride toothpaste and Aloe vera tooth gel on artificial white spot lesions through the Knoop microhardness (KHN) analysis. Methods: Sound bovine enamel samples (2 mm/diameter and 2 mm/depth) were prepared and immersed in artificial white spot lesion for 24 h. The preparation of artificial white spot lesions was performed by pH-cycling process. The samples were randomly divided into two groups (n=20), according the dentifrice used: containing fluoride (Colgate Total 12) or Aloe vera (Forever Bright Aloe Vera Toothgel). The top surface of samples was submitted to 10,000, 25,000, 50,000 and 100,000 brushing cycles (200 g load) in an automatic brushing machine with abrasive slurry. The KHN analysis were evaluated at baseline, after immersion in artificial white spot lesion and after 10,000, 25,000, 50,000 and 100,000 cycles of brushing. Data were analyzed by two-way repeated measures ANOVA and Tukey tests (p=0.05). Results: The KHN values significantly increased after brushing cycles compared to demineralized means. No significant differences showed for dentifrice factor (p=0.263). However, there were statistically significant differences between groups in cycles of brushing times (p=0.0001). Conclusion: The toothpastes (containing fluoride or Aloe vera) were effective in increasing the superficial microhardness of artificial white spot lesions.

Objetivo O presente estudo teve como objetivo avaliar as alterações morfológicas e químicas na dentina geradas por diferentes métodos de esterilização, através de microscopia eletrônica de varredura (MEV) e da análise por espectrometria de energia dispersiva de raios-X. Material e método Seccionaram-se 5 dentes humanos em 4 amostras, as quais foram divididas em 3 espécimes cada, totalizando 60 espécimes. Os espécimes foram separados conforme os grupos de esterilização: calor úmido sob pressão; radiação gama cobalto 60; controle (sem esterilização). Após a esterilização, os 60 espécimes foram analisados por MEV, usando 3 aumentos: 1500X, 5000X, 10000X. As imagens foram analisadas por 3 examinadores previamente calibrados, que distribuíram escores referentes às alterações observadas nos túbulos dentinários: 0 = sem alteração morfológica, 1 = baixa obliteração dos túbulos dentinários, 2 = moderada obliteração, 3 = completa obliteração. A composição química da dentina foi avaliada por meio do processo EDS, com 15 kV de incidência e penetração de 1 μm. Os dados obtidos foram submetidos ao teste estatístico de Kruskall-Wallis com nível de significância de 5%. Resultado De acordo com os resultados obtidos, verificou-se que a esterilização tanto por autoclave quanto por radiação gama cobalto 60 não provocou alterações significativas na morfologia dos túbulos dentinários e na constituição química da dentina. Conclusão Concluiu-se que ambos os métodos podem ser utilizados para a esterilização de dentes em pesquisa in vitro.

Aim The present study evaluated the morphological and chemical changes of dentin produced by different sterilization methods, using scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDS) analysis. Material and method Five human teeth were sectioned into 4 samples, each divided into 3 specimens. The specimens were separated into sterilization groups, as follows: wet heat under pressure; cobalt 60 gamma radiation; and control (without sterilization). After sterilization, the 60 specimens were analyzed by SEM under 3 magnifications: 1500X, 5000X, and 10000X. The images were analyzed by 3 calibrated examiners, who assigned scores according to the changes observed in the dentinal tubules: 0 = no morphological change; 1, 2 and 3 = slight, medium and complete obliteration of the dentinal tubules. The chemical composition of dentin was assessed by EDS, with 15 kV incidence and 1 μm penetration. Result The data obtained were submitted to the statistical tests of Kruskall-Wallis and ANOVA. It was observed that both sterilization methods – with autoclave and with cobalt 60 gamma radiation – produced no significant changes to the morphology of the dentinal tubules or to the chemical composition of dentin. Conclusion Both methods may thus be used to sterilize teeth for research conducted in vitro.

OBJECTIVE: This study evaluated, in vitro, the fracture resistance of human non-vital teeth restored with different reconstruction protocols. MATERIAL AND METHODS: Forty human anterior roots of similar shape and dimensions were assigned to four groups (n=10), according to the root reconstruction protocol: Group I (control): non-weakened roots with glass fiber post; Group II: roots with composite resin by incremental technique and glass fiber post; Group III: roots with accessory glass fiber posts and glass fiber post; and Group IV: roots with anatomic glass fiber post technique. Following post cementation and core reconstruction, the roots were embedded in chemically activated acrylic resin and submitted to fracture resistance testing, with a compressive load at an angle of 45º in relation to the long axis of the root at a speed of 0.5 mm/min until fracture. All data were statistically analyzed with bilateral Dunnett's test (α=0.05). RESULTS: Group I presented higher mean values of fracture resistance when compared with the three experimental groups, which, in turn, presented similar resistance to fracture among each other. None of the techniques of root reconstruction with intraradicular posts improved root strength, and the incremental technique was suggested as being the most recommendable, since the type of fracture that occurred allowed the remaining dental structure to be repaired. CONCLUSION: The results of this in vitro study suggest that the healthy remaining radicular dentin is more important to increase fracture resistance than the root reconstruction protocol.

Objetivo deste trabalho foi avaliar o selamento marginal de cavidades retroapicais obturadas com os cimentos Portland (Concrebrás S/A-MG-Brasil), MTA TM (Dentsply International, Johnson City, TN, EUA) e SealapexTM (Kerr Corporation, Orange, California, EUA) acrescido de óxido de zinco (Odahcam Herpo Produtos Dentários Ltda, Rio de Janeiro, RJ, Brasil). Foram utilizados 42 dentes unirradiculados humanos extraídos que, após a remoção de suas coroas, tiveram seus canais preparados a 1mm aquém do ápice radicular até o instrumento nº 60. Os canais foram obturados com cones de guta-percha e cimento SealapexTM e, em seguida, foi realizado o seccionamento de 3mm do ápice radicular em ângulo de 90º em relação ao longo eixo do dente. Foram preparadas cavidades retroapicais com ponta diamantada em ultrasom, a uma profundidade de 3mm, e as raízes foram divididas aleatoriamente em 3 grupos de acordo com o material retrobturador: G1- Portland, G2 - MTA, G3 - Sealapex acrescido de óxido de zinco. As raízes foram impermeabilizadas externamente e imersas em fluido tissular simulado por 30 dias. Em cada grupo, 2 dentes serviram como controle positivo (não impermeabilização) e negativo (total impermeabilização). Os espécimes foram imersos em corante Rhodamina B 0,2% por 24 horas para avaliação da infiltração marginal. Os cimentos Portland, SealapexTM + óxido de zinco e MTA apresentaram média de infiltração de 0,75; 0,35 e 0,35mm respectivamente, não havendo diferenças estatísticas significantes entre eles (p>0,05).

The objective of this study was to evaluate the apical leakage of retrograde cavities filled with Portland Cement (Concrebrás S/A-MG-Brazil), ProRoot MTA TM (Dentsply International, Johnson City, TN, USA) and Sealapex (Kerr Corporation, Orange, California, USA) with addition of zinc oxide (Odahcam Herpo Produtos Dentários Ltda, Rio de Janeiro, RJ, Brazil). Forty-two extracted single-rooted human teeth were decoronated and used for this study. The root canals were instrumented at 1.0mm short of the apical foramen using the step-back technique to an apical ISO size 60. The roots were obturated with gutta-percha points and sealer Sealapex (Kerr Corporation-USA) and then 3mm of each root apex was sectioned at a 90° angle. Ultrasonic retrograde preparation was performed with a diamond tip to 3mm depth and the roots were randomly divided into 3 groups according to the filling material: G1-Portland, G2-ProRoot MTA, G3- Sealapex zinc oxide-added cement. The root surfaces were covered with nail varnish up to 2mm from the apical foramen, immersed in simulated tissue fluid for 30 days, and then immersed in 0.2% Rhodamine B solution for 24 hours for evaluation of marginal leakage. The results showed mean leakage of 0.75, 0.35 and 0.35 for groups 1, 2 and 3, respectively; however, Kruskal-Wallis test revealed that there was no statistically significant difference among the results (p>0.05).

Este estudo propôs avaliar, através da microscopia eletrônica de varredura (MEV), a capacidade de limpeza e remoção de "smear layer" e debris das paredes de canais radiculares preparados e irrigados com soluções de hipoclorito de sódio (NaOCl) a 2,5%, gluconato de clorexidina (CLX) a 2,0% e soro fisiológico (controle). Utilizaram-se 50 dentes unirradiculares extraídos com um único canal. Cortaram-se as coroas no limite cervical e os canais foram preparados até o instrumento 45. Durante o preparo foram feitas irrigações com as soluções a serem avaliadas: Grupo 1: NaOCl a 2,5% (10 raízes); Grupo 2: NaOCl a 2,5% seguido de irrigação com EDTA a 17% por 2 minutos (10 raízes); Grupo 3: CLX a 2,0% (10 raízes); Grupo 4: CLX a 2,0% e EDTA a 17% por 2 minutos (10 raízes); Grupo 5: soro fisiológico (5 raízes); Grupo 6: soro fisiológico e EDTA a 17% por 2 minutos (5 raízes). Após o preparo, os canais foram irrigados com as soluções em teste, e as raízes cortadas no sentido V-L para avaliação por MEV, nos terços cervical, médio e apical, verificando-se a presença de "smear layer" e debris. Os dados relativos aos escores atribuídos foram avaliados pelo teste Kruskal-Wallis com p = 5%. Os resultados mostraram que o uso do EDTA diminuiu significativamente (p < 0,05) a "smear layer" para todas as soluções avaliadas em todos os terços. Quando não se utilizou o EDTA, somente para o grupo do NaOCl, verificou-se quantidade significativamente maior de "smear layer" no terço apical. Exceto para a CLX, o uso de EDTA diminuiu significativamente a quantidade de debris. Concluiu-se, que após o preparo, faz-se necessária a utilização do EDTA a fim de promover melhor limpeza das paredes dos canais radiculares.

The purpose of this study was to carry out a scanning electron microscopic (SEM) analysis of the cleaning qualities and smear layer removal from root canal walls, instrumented and irrigated with 2.5% NaOCl, 2.0% chlorhexidine and saline solutions. Fifty extracted teeth were used in this study. All teeth were radiographed to determine the existence of a single canal. The crowns were cut at the cervical limit and the root canals were instrumented with K-type files up to size 45. During root canal preparation, irrigations were made with the different solutions being evaluated: Group 1: 2.5% NaOCl (10 roots); Group 2: 2.5% NaOCl and 17% EDTA for 2 minute (10 roots); Group 3: 2.0% chlorhexidine (10 roots); Group 4: 2.0% chlorhexidine and 17% EDTA for 2 minutes (10 roots); Group 5: saline solution (5 roots); Group 6: saline solution and 17% EDTA for 2 minutes (5 roots). After instrumentation, the canals were irrigated with each one of the solutions and the roots were cut in the buccolingual direction for SEM analysis, at the cervical, middle and apical thirds, to ascertain the presence or absence of smear layer and debris. SEM analysis was performed by three calibrated examiners and scores were submitted to Kruskal-Wallis test at the significance level of p = 5%. Results showed that the use of 17% EDTA decreased the smear layer significantly (p < 0.05) for all evaluated solutions in all thirds. When EDTA was not used, a significantly higher quantity of smear layer on the apical third was observed only in the NaOCl groups. The use of 17% EDTA was significant for debris removal except for the chlorhexidine groups. The following conclusion could be drawn: the use of 17% EDTA was necessary to enhance cleanness of the root canals.