The welding of metallic materials by the Friction Stir Welding (FSW) method is a very attractive process for preserving their characteristics, especially for copper and its alloys that require high heat input and present many distortions by traditional methods. However, it is a great challenge to produce welds free of defects and maintain or improve their mechanical properties. In the current literature data on FSW parameters for copper and its alloys are scarce. In this study, tests were performed with a combination of four tool rotations (750, 850, 950, 1050 rev.min-1) and two welding speeds (20 and 60 mm.min-1), maintaining the tool inclination angle in 3° and waiting time of 5 seconds. The objective of this work is to analyze the microstructure and mechanical performance of lap joints of the UNS C19400 alloy joined by FSW. The process temperature was monitored to trace the heating profile of the process, in addition to microhardness and shear strength tests, in addition to optical microscopy for analysis. The joints welded by the parameters Ω 950 rev.mm-1 �� 20mm.min-1 obtained a mechanical performance of 73% compared to the characteristics of the base metal and despite the appearance of volumetric defects at the microstructural level, the metallurgical transformations of recovery and recrystallization of the grains observed in the microstructure played a key role in the result. (FSW methods However properties scarce study 750, 750 (750 850 105 rev.min1 revmin1 revmin rev.min 1 rev min rev.min-1 20 (2 6 mm.min1, mmmin1 mmmin mm.min , mm mm.min-1) 3 seconds C C1940 analysis 95 rev.mm1 revmm1 revmm rev.mm rev.mm- � 20mm.min1 20mmmin1 20mm.min 20mm 20mm.min- 73 level result 75 (75 85 10 min1 rev.min- 2 ( mm.min1 mm.min-1 C194 9 mm1 20mmmin 7 (7 8 mm.min- C19 C1

The copper alloy UNS-C27200 is a binary brass, composed of 38wt%Zn, beeing one of the most used in the industry. The union of Cu-Zn alloys by conventional welding by fusion in thin plates presents several challenges. The Friction Stir Welding (FSW) process performs the union of two, or more materials, through a rotating tool that travels throughout the welding region. One the great advantages of FSW is working below the melting point of the material, which reduces the change in the microstructure and properties of the material, when compared to conventional welding processes. Due to the lack of research on FSW process in lap brass joints with thin thicknesses, the present work aims to expand these studies in order to contribute to future research. Eight conditions were evaluated, varying rotation and welding speed. In the best results by visual inspection, analyzes of microstructure, temperature, microhardness and mechanical strength were performed. The better welding results were obtained with ω=1050 rpm and ν=20 mm/min. There was reduction of approximately 50% between Stir Zone and Base metal. The mechanical strength was affected by the pin hole resulting from the process. The microstructure revealed a homogeneous mixture in the stir zone and no defects were detected. UNSC27200 UNSC UNS C27200 C UNS-C2720 38wtZn wtZn 38wt Zn wt 38wt%Zn industry CuZn Cu challenges (FSW two materials region material processes thicknesses evaluated speed inspection temperature performed ω1050 ω 1050 ω=105 ν20 ν 20 ν=2 mmmin mm min mm/min 50 metal detected UNSC2720 C2720 UNS-C272 ω105 105 ω=10 ν2 2 ν= 5 UNSC272 C272 UNS-C27 ω10 10 ω=1 UNSC27 C27 UNS-C2 ω1 1 ω= UNSC2 C2 UNS-C

RESUMO: O objetivo deste trabalho foi investigar a presença de Salmonella spp. em amostras coletadas de carcaças de bovinos, em três pontos da linha de abate (após a esfola, lavagem e refrigeração) de três frigoríficos exportadores no Brasil. A detecção foi realizada pela ISO 6579:2002, e confirmada por PCR e qPCR. Os isolados foram tipificados por testes de soroaglutinação e PFGE e avaliado o perfil de sensibilidade aos antibióticos pelo método de difusão em disco. A contaminação foi detectada em apenas um abatedouro-frigorífico. As contaminações das carcaças (n=90) e amostras de carne (n=270) por Salmonella spp. foram 6 (6,7%) e 7 (2,6%), respectivamente. Todos os isolados foram confirmados por PCR e qPCR. A análise sorológica e o PFGE mostraram um único perfil: Typhimurium. As cepas apresentaram 100% de suscetibilidade à ampicilina, cefotaxima, ciprofloxacina, cloranfenicol, gentamicina e tetraciclina. As carcaças positivas após a refrigeração apresentam um risco direto para o consumidor, uma vez que, após este processo, a carne está pronta para ser comercializada.

ABSTRACT: The aim of the present study was to investigate the presence of Salmonella spp. in samples collected from beef meat at three points of the slaughter line (after skinning, washing and cooling) at three slaughterhouses in Brazil that export meat. Detection was based on ISO 6579:2002 and confirmed by PCR and qPCR. The isolates were typified using slide agglutination tests and PFGE. The antibiotic sensitivity profile was determined using the disk diffusion method. Contamination was detected in only one slaughterhouse. The overall frequency of contamination by Salmonella spp. was 6.7% of carcasses (6/90) and 2.6% of carcass surface samples (7/270). All isolates were confirmed by PCR and qPCR. The serological analysis and the PFGE showed a single profile: Typhimurium. The strains demonstrated 100% susceptibility to ampicillin, cefotaxime, ciprofloxacin, chloramphenicol, gentamicin and tetracycline. Positive carcasses after cooling pose a direct risk to consumers, since the meat is considered ready to be marketed after this process.

RESUMO: No Brasil, segundo o Programa Nacional de Controle e Erradicação da Brucelose e Tuberculose Animal (PNCEBT), do Ministério da Agricultura, Pecuária e Abastecimento (MAPA), os testes de rotina para o diagnóstico de tuberculose bovina são o teste cervical simples (TCC), o teste da prega caudal (TPC) e o teste cervical comparativo (TCC), sendo que o último também é utilizado como teste confirmatório. Um grupo de 53 animais oriundos de três rebanhos leiteiros de área de foco para tuberculose bovina que foram submetidos a vazio sanitário no Rio Grande do Sul foi submetido ao TCC. Os tecidos destes animais foram cultivados e as colônias resultantes confirmadas por PCR e sequenciamento de DNA. Dos 53 animais analisados no TCC, 32 (60,4%) foram negativos, 14 (26,4%) positivos e sete (13,2%) inconclusivos, com base no PNCEBT. O TCC detectou como positivos 11 dos 39 animais com infecção por M. bovis confirmada por cultivo. Do total de 14 animais não infectados, baseado na cultura, o TCC detectou oito como negativos. Assim, o TCC apresentou, para a população amostrada, sensibilidade de 28,2% e especificidade de 57,1%. Um total de 24/32 (75,0%) dos animais negativos ao TCC foi positivo no cultivo (confirmado por PCR), sendo considerados falso-negativos ao TCC. A manutenção destes animais falso-negativos nos rebanhos tem sérias implicações para o controle da enfermidade, já que os mesmos podem ser fonte de infecção. A adição de testes complementares poderia auxiliar na identificação destes animais, aumentando a cobertura diagnóstica.

ABSTRACT: According to the Brazilian National Program for the Control and Eradication of Animal Brucellosis and Tuberculosis (PNCEBT), the routine tests for the diagnosis of bovine tuberculosis in the country are the simple intradermal tuberculin test (SITT) of the Ministry of Agriculture, Livestock and Food Supply (MAPA), the caudal fold test and the comparative intradermal tuberculin test (CITT). The latter is also used as a confirmatory test. A group of 53 animals from three dairy herds in a focal area for bovine tuberculosis, that were submitted to depopulation in the state of Rio Grande do Sul, were submitted to the CITT. Tissues were cultured and the resulting colonies were confirmed by PCR and DNA sequencing. Among the 53 animals analyzed using the CITT, 32 (60.4%) were negative, 14 (26.4%) were positive and seven (13.2%) results were inconclusive. The CITT detected 11 of the 39 animals with culture-confirmed M. bovis infection as positive. Among the total of 14 uninfected animals based on cultures, the CBT detected eight as negative. Thus, the CITT demonstrated sensitivity of 28.2% and specificity of 57.1% for the population sampled. A total of 24/32 (75.0%) of the animals with negative CITT results were culture positive (confirmed by PCR) and were considered false negatives based on the CITT. The maintenance of these false-negative animals in herds has serious implications for the control of the disease, since they can be a source of infection. The addition of complementary tests could help identify such animals and increase the odds of diagnostic success.