Abstract The aim of this study was to incorporate tucuma oil (Astrocaryum vulgare) into PolyCaprolactone (PCL) electrospun fibers and evaluate its physicochemical properties and cell viability. FTIR and DRX confirmed that tucuma oil (TO) does not affect the chemical properties of PCL and that the oil was loaded into the PCL microstructure, while TGA analysis showed that the oil increased the thermal stability of the polymeric fibers. SEM showed that the addition of the oil modified fibers structure by reducing the average fiber size from 5.5 μm to 1.7 μm for TO loaded samples. Cell viability assay demonstrated an increment on cell proliferation from 80% of pure PCL to 100% for samples containing TO. Therefore, it can be concluded that tucuma oil can be incorporated into PCL to form fibers by electrospinning, without meaningful changes in its physicochemical properties and increasing its biocompatibility.

Resumo Introdução A quantidade e qualidade óssea na implantodontia é um fator de alta relevância quando se tem por objetivo instalar implantes e reabilitar pacientes. No entanto, essa disponibilidade é comprometida na maioria dos casos, havendo a necessidade da busca de novos biomateriais, membranas e substâncias para uma regeneração mais favorável. Objetivo: O objetivo deste estudo foi avaliar a resposta da neoformação óssea em defeitos críticos em calvárias de ratos utilizando scaffolds de fibras de blenda polimérica a partir de poli (ácido láctico-co-glicólico) e poli-isopreno (Cellprene®). O projeto foi aprovado pelo Comitê de Ética em Experimentação Animal. Material e método Neste estudo, foram utilizados 36 ratos (Rattus Norvegicus), variação albinus, Holtzman, adultos. Os animais foram submetidos à tricotomia na região da calota craniana e à confecção de defeitos ósseos circulares bilaterais com 5 mm de diâmetro. Os animais foram divididos em três grupos: GC – defeito sem colocação de biomaterial; GCol – scaffolds de colágeno (Bio-Gide, da empresa Geistlich Pharma Ag – Biomaterials); GPoli – scaffolds de fibras de blenda polimérica a partir de poli (ácido láctico-co-glicólico - Cellprene®). Cada grupo foi avaliado em quatro períodos experimentais (7, 15, 30 e 60 dias). Após esses períodos, os animais foram sacrificados, e as peças passaram por tramitação laboratorial de rotina e inclusão em parafina. Foram obtidos cortes semisseriados e corados pela técnica de hematoxilina e eosina para análise histométrica e histológica. Foi executada análise histométrica para avaliar a composição do tecido ósseo reparado (% osso). Os dados obtidos foram analisados estatisticamente com nível de significância de 95%. Resultado Foi verificado que o GCol apresentou maior preenchimento do defeito nos períodos de 30 e 60 dias em comparação aos GC e GPoli. Conclusão Os scaffolds de fibras de blenda polimérica a partir de poli (ácido láctico-co-glicólico) e poli-isopreno (Cellprene®) não apresentaram vantagens quando utilizados em defeitos críticos.

Abstract Introduction The bone quantity and quality in implant dentistry is a highly relevant factor when it aims the use of implants and rehabilitation in patients. However, this availability is compromised in most cases, with the need to research new biomaterials, membranes and substances for more favorable regeneration. Objective: The aim of this study was to evaluate the response of bone neoformation in critical defects in rat calvaries using polymeric blend fiber scaffolds from Poly (Lactic-Co-Glycolic Acid) and Polyisoprene (Cellprene®). The project was approved by the Animal Experimentation Ethics Committee. Material and method In this study 36 rats (Rattus Norvegicus), variation albinus, Holtzman, adults were used. The animals had trichotomy in the region of the skull and the confection of bilateral circular bone defects with a diameter of 5 mm. The animals were divided into 3 groups: Group GC - defect without biomaterial placement, Group GCol - collagen scaffolds (Bio-Gide, from Geistlich Pharma Ag - Biomaterials), Group GPoli - polymeric blend fiber scaffolds from Poly (Lactic-Co-Glycolic Acid)-Polyisoprene. Each group was evaluated in 4 experimental periods (7, 15, 30 and 60 days). After these periods the animals were sacrificed and the pieces underwent routine laboratory procedures and paraffin embedding. Semi-serial sections were obtained and stained by hematoxylin and eosin technique for histometric and histological analysis. Histometric analysis was performed to evaluate the composition of repaired bone tissue (% Bone). The data obtained were statistically analyzed with a significance level of 95%. Result It was found that the GCol group presented greater defect filling in the 30 and 60 days periods compared to the GC and GPoli groups. Conclusion Polymer blend fiber scaffolds from Poly (Lactic-Co-Glycolic Acid) and Polyisoprene (Cellprene®) did not have advantages when used in critical defects.

Abstract One of the most important characteristics of calcium phosphate cements is their resorbability when implanted in the body. However, the in vivo resorption rate is slow due to the lack of intrinsic open porosity. In this study, macroporous structures were obtained by mixing alpha-tricalcium phosphate (α-TCP) cement with a foamed liquid phase containing different concentrations of sodium hydrogen phosphate and non-ionic (Lutensol) or anionic (Sodium Lauryl Sulfate) surfactant. The cement paste was prepared by hand mixing in a system of two syringes connected by a polyvinyl chloride (PVC) valve, an environmentally friendly method. Solutions with Lutensol (L110) showed greater foamability than solutions with Sodium Lauryl Sulfate (SLS). Scanning Electron Microscopy characterization helped verify that the prepared samples showed a macroporous interconnected structure, and X-ray diffraction analysis evidenced the transformation of α-TCP into calcium deficient hydroxyapatite (CDHA). This study suggests that the calcium phosphate cement samples foamed with Lutensol may be further evaluated as suitable materials for bone filling.