Resumo Este estudo avaliou as dimensões de pinos intrarradiculares usando um novo software de tomografia computadorizada de feixe cônico (TCFC) e um micrômetro digital, e verificou o potencial da redução do artefato de contraste do branco. Sessenta e três dentes humanos unirradiculares foram modelados, obturados, preparados para colocação de pinos e distribuídos em três grupos: G1: pino de fibra de vidro pré-fabricado anatômico; G2: pino metálico de liga de baixa fusão; G3: pino metálico de liga de ouro. Após a confecção e cimentação dos pinos com RelyX U200®, os espécimes foram cortados no sentido axial a 9 mm do ápice radicular, sendo efetuadas marcações em suas superfícies radiculares (eixos X, Y e Z) para orientação das medidas e sincronizações das imagens. Foi utilizado um micrômetro digital para a mensuração das dimensões dos pinos originais (grupo controle) associado ao microscópio operatório. Posteriormente, as imagens em TCFC foram obtidas usando o PreXion 3D Elite®. Para a mensuração dos pinos nas imagens de TCFC utilizou-se o arquivo DICOM e a ferramenta de medida do software e-Vol DX, configurada para medidas milesimais, com o filtro BAR (Blooming Artifact Reduction). Os dados estatísticos foram avaliados com a análise de variância não-paramétrica de Van der Waerden, seguida pelo Teste de Tukey aplicado aos dados normalizados. O nível de significância foi de α = 5%. Os resultados mostraram que as medidas dos diâmetros dos pinos intrarradiculares (fibra de vidro anatômico, metálico liga de baixa fusão, e em liga de ouro) usando o software e-Vol DX e o micrômetro não mostram diferenças significativas entre si. O uso do filtro BAR do software e-Vol DX não induziu diferenças dimensionais nas imagens de TCFC dos pinos quando comparadas às medidas realizadas com o micrômetro sobre os pinos originais. O uso do filtro BAR eliminou artefatos de contraste do branco.

Abstract This study evaluated the dimensions of intraradicular posts using a new cone beam CT (CBCT) software, and verified the potential of blooming artifact reduction. Sixty-three single-rooted human teeth were shaped, obturated, prepared for intracanal post placement and distributed into three groups: G1: anatomically customized prefabricated glass fiber posts; G2: low-fusion alloy posts; G3: gold alloy posts. After post fabrication and luting with RelyX U200®, specimens were sectioned axially at 9 mm from the root apex, and markings were made on the root surfaces (X-, Y- and Z-axes). The dimensions of the original posts (control group) were measured using a digital micrometer. CBCT scans of the teeth were obtained using a PreXion 3D Elite® scanner. Posts were measured on CBCT scans using DICOM files and the e-Vol DX software. A specific filter, Blooming Artefact Reduction (BAR), was developed to analyze intracanal posts. Statistical data were evaluated using the Van de Waerden nonparametric analysis of variance and, after that, normalized data were analyzed using the Tukey test. The level of significance was set at α = 5%. The measures of the anatomical prefabricated, low-fusion alloy and gold alloy intracanal posts obtained using the e-Vol DX CBCT software and a micrometer were not significantly different (p>0.05). The use of the BAR filter of the e-Vol DX software application did not induce any dimensional differences on CBCT scans of intracanal posts when compared with measurements made with a micrometer on original posts. The use of the BAR filter eliminated blooming artifacts.

Abstract Objectives To determine the concentration of calcium, iron, manganese and zinc ions after the application of chelator to Enterococcus faecalis biofilms. Material and Methods Fifty bovine maxillary central incisors were prepared and inoculated with E. faecalis for 60 days. The following were used as irrigation solutions: 17% EDTA (pH 3, 7 and 10), 2.5% sodium hypochlorite (NaOCl) combined with 17% EDTA (pH 3, 7 and 10), distilled water (pH 3, 7 and 10), and 2.5% NaOCl. Each solution was kept in the root canal for five minutes. Fifteen uncontaminated root canals were irrigated with 17% EDTA (pH 3, 7 and 10). Six teeth were used as bacterial control. The number of calcium, iron, manganese and zinc ions was determined using flame atomic absorption spectrometry. Mean ± standard deviation (SD) values were used for descriptive statistics. Results Calcium chelation using 17% EDTA at pH 7 was higher than at pH 3 and 10, regardless of whether bacterial biofilm was present. The highest concentration of iron occurred at pH 3 in the presence of bacterial biofilm. The highest concentration of manganese found was 2.5% NaOCl and 17% EDTA at pH 7 in the presence of bacterial biofilm. Zinc levels were not detectable. Conclusions The pH of chelating agents affected the removal of calcium, iron, and manganese ions. The concentration of iron ions in root canals with bacterial biofilm was higher after the use of 17% EDTA at pH 3 than after the use of the other solutions at all pH levels.