Abstract The aim of this in vitro study was to evaluate the potential of different fluoridated varnishes to inhibit the progression of incipient caries lesions after cariogenic challenge. Seventy-five enamel specimens of bovine teeth were prepared and selected based on the initial surface microhardness (SMH). The specimens were first subjected to artificial demineralization (in buffer solution) after which SMH was re-analyzed (SM1). They were then randomly assigned to five experimental groups: 1- CONTROL (pH cycling), 2 - MI VAR (MI Varnish with RECALDENTTM - CPP-ACP), 3 - PROFL (Profluorid®), 4 - CLIN (ClinproTM White Varnish with TCP), and 5 - DUR (Duraphat®) (n=15). The varnishes were applied in a thin layer and the specimens were then subjected to pH cycling for eight days. The SMH and cross-sectional microhardness (CSMH) were then analyzed (SM2). The fluoride and calcium ion concentrations in the solution were analyzed by the indirect method and atomic absorption spectrophotometry, respectively. Data were statistically analyzed by Student’s t-test, ANOVA/Tukey-Kramer, or Kruskall-Wallis/Dunn tests for individual comparisons (p˂0.05). All varnishes led to significantly higher surface and subsurface remineralization compared with the control group but did not differ from each other. The varnishes with the highest fluoride release were: PROFL and CLIN, followed by MI VAR and DUR. The varnishes with significantly higher release of calcium were: DUR, CLIN, and PROFL. In conclusion, all commercial fluoridated varnishes tested have good potential to inhibit the progression of demineralization, regardless of the ion release mechanisms. challenge Seventyfive Seventy SMH. . (SMH) reanalyzed re SM1. SM1 SM (SM1) groups 1 cycling, , cycling) CPPACP, CPPACP CPP ACP CPP-ACP) Profluorid®, Profluorid Profluorid® (Profluorid®) ClinproTM TCP, TCP TCP) Duraphat® Duraphat (Duraphat® n=15. n15 n n=15 15 (n=15) days crosssectional cross sectional CSMH (CSMH SM2. SM2 (SM2) spectrophotometry respectively Students Student s ttest, ttest t test, test t-test ANOVA/TukeyKramer, ANOVATukeyKramer ANOVA/Tukey Kramer, ANOVA Tukey Kramer ANOVA/Tukey-Kramer KruskallWallis/Dunn KruskallWallisDunn Kruskall Wallis/Dunn Wallis Dunn p˂0.05. p005 p p˂0.05 0 05 (p˂0.05) other conclusion mechanisms (SMH (SM1 CPP-ACP (Profluorid® (Duraphat n1 n=1 (n=15 (SM2 TukeyKramer ANOVA/TukeyKramer ANOVATukey KruskallWallis WallisDunn p00 p˂0.0 (p˂0.05 (SM (Profluorid n= (n=1 p0 p˂0. (p˂0.0 (n= p˂0 (p˂0. (n p˂ (p˂0 (p˂ (p

Resumo O objetivo deste estudo in vitro foi avaliar o potencial de diferentes vernizes fluoretados em inibir a progressão de lesões de cárie incipientes. Setenta e cinco espécimes de esmalte de dentes bovinos foram preparados e selecionados com base na microdureza superficial inicial (MDS/SM). Os espécimes foram submetidos à desmineralização artificial (em solução de Buskes), sendo então a MDS (SM1) reanalisada. Foram então distribuídos aleatoriamente em cinco grupos experimentais: 1- CONTROLE (pH cycling), 2 - MI VAR (MI Varnish with RECALDENTTM - CPP-ACP), 3 - PROFL (Profluorid®), 4 - CLIN (ClinproTM White Varnish with TCP), and 5 - DUR (Duraphat®). Os vernizes foram aplicados em camada fina e os espécimes foram então submetidos à ciclagem de pH por oito dias. A MDS final (SM2) e a microdureza transversal (CSMH) foram então analisadas. As concentrações de flúor e íons cálcio em solução foram analisadas pelo método indireto e espectrofotometria de absorção atômica, respectivamente. Os dados foram analisados estatisticamente pelo teste T de Student, ANOVA/Tukey-Kramer ou testes de Kruskall-Wallis/Dunn para comparações individuais (p˂0,05). Todos os vernizes levaram a uma remineralização superficial e subsuperficial significativamente maior em comparação com o grupo controle, não diferindo significativamente entre si. Os vernizes com maior liberação de flúor foram: PROFL e CLIN, seguidos de MI VAR e DUR. Os vernizes com liberação significativamente maior de cálcio foram: DUR, CLIN e PROFL. Pôde-se concluir que todos os vernizes fluoretados comerciais testados apresentam bom potencial de inibição da progressão da desmineralização, independentemente dos mecanismos de liberação de íons. incipientes MDS/SM. MDSSM MDS/SM . SM (MDS/SM) Buskes, Buskes , Buskes) SM1 (SM1 reanalisada experimentais 1 cycling, cycling cycling) CPPACP, CPPACP CPP ACP CPP-ACP) Profluorid®, Profluorid Profluorid® (Profluorid®) ClinproTM TCP, TCP TCP) Duraphat®. Duraphat Duraphat® (Duraphat®) dias SM2 (SM2 CSMH (CSMH atômica respectivamente Student ANOVA/TukeyKramer ANOVATukeyKramer ANOVA/Tukey Kramer ANOVA Tukey KruskallWallis/Dunn KruskallWallisDunn Kruskall Wallis/Dunn Wallis Dunn p˂0,05. p005 p p˂0,05 0 05 (p˂0,05) controle si Pôdese Pôde se (MDS/SM (SM CPP-ACP (Profluorid® (Duraphat® TukeyKramer ANOVATukey KruskallWallis WallisDunn p00 p˂0,0 (p˂0,05 (Profluorid (Duraphat p0 p˂0, (p˂0,0 p˂0 (p˂0, p˂ (p˂0 (p˂ (p

Abstract Objective: To evaluate the efficacy of xylitol varnishes in the inhibition of enamel demineralization in vitro. Material and Methods: Bovine enamel blocks (n=120) were randomly allocated to four groups (n = 30), and the surface hardness (SH) was measured at baseline. The blocks were treated with the following varnishes: 20% xylitol, 20% xylitol plus F (5% NaF), Duraphat™ (5% NaF, positive control), and placebo (no-F/xylitol, negative control). The varnishes were applied and removed after 6 h of immersion in artificial saliva. The blocks were subjected to pH cycles (demineralization and remineralization for 2 and 22h/day, respectively, for 8 days). Surface and cross-sectional hardnesses were measured to calculate the percentage of SH loss (%SHL) and the integrated loss of the subsurface hardness (ΔKHN). Data were statistically analyzed using Kruskal-Wallis and Tukey’s tests (p<0.05). Results: %SHL was significantly decreased by 20% xylitol plus F, Duraphat™, and 20% xylitol varnishes compared to placebo. The use of 20% xylitol plus F varnish led to a significantly lower percentage of SH loss compared to the use of 20% xylitol varnish without F. However, the experimental and commercial varnishes led to significantly lower subsurface demineralization compared to placebo and did not differ from each other. Conclusion: Xylitol varnishes, especially when combined with F, effectively prevent enamel demineralization.

RESUMO Objetivo: O presente estudo objetivou investigar a atividade antimicrobiana e a resistência de união ao cisalhamento (RU) de braquetes ortodônticos colados em esmalte bovino, utilizando compósitos experimentais com diferentes concentrações de nanopartículas de prata revestidas com dióxido de silício (NPs Ag@SiO2). Material e Métodos: Cinquenta incisivos bovinos foram divididos em cinco grupos, de acordo com o compósito utilizado (n = 10): G1 - Grupo Controle (Resina Transbond XT); G2 - Compósito Experimental sem NPs Ag@SiO2; G3 - Compósito Experimental com 0,5% de NPs Ag@SiO2; G4 - Composto Experimental com 1% de NPs Ag@SiO2; e G5 - Compósito Experimental com 3% de NPs Ag@SiO2. O teste de RU foi realizado em máquina universal de ensaios mecânicos, e o índice de adesivo remanescente (IAR) foi analisado por microscopia óptica. Para a avaliação da atividade antimicrobiana, biofilme de S. mutans foi formado por três dias em discos de hidroxiapatita. Posteriormente, foram avaliadas as unidades formadoras de colônias (UFC) de S. mutans. Para a análise de RU, foi utilizada a Análise de Variância, seguida do teste de Tukey, com nível de significância estatística de 5%. Os dados de UFC foram analisados por meio do teste de Kruskal-Wallis, seguido do teste post-hoc de Dunn. Os resultados de IAR foram analisados descritivamente. Resultados: Não houve diferença estatisticamente significativa nos valores de RU entre os grupos experimentais e o grupo controle (p> 0,05). A incorporação de 3% de NPs Ag@SiO2 reduziu estatisticamente os valores de RU (p< 0,05), em comparação ao grupo com 1%. A adição de 3% de NPs Ag@SiO2 ao compósito reduziu significativamente a formação de biofilme de S. mutans, em relação ao grupo G2 (p< 0,05). Conclusão: Os compósitos com incorporação de 3% de NPs Ag@SiO2 apresentaram valores de RU semelhantes ao grupo controle e demonstraram significativa atividade antimicrobiana.

ABSTRACT Objective: This study aimed to investigate the antimicrobial activity and shear bond strength (SBS) of orthodontic brackets to bovine enamel using experimental composites with different concentrations of silicon dioxide-coated silver nanoparticles (Ag@SiO2 NPs). Methods: Fifty bovine incisors were divided into five groups according to the composite (n = 10): G1 - Control Group (Transbond XT Resin), G2 - Experimental composite without Ag@SiO2 NPs; G3 - Experimental composite with 0.5% of Ag@SiO2 NPs; G4 - Experimental composite with 1% of Ag@SiO2 NPs; G5 - Experimental composite with 3% of Ag@SiO2 NPs. The SBS test was performed using a universal mechanical testing machine, and the adhesive remnant index (ARI) was analyzed by optical microscopy. For the antimicrobial activity evaluation, Streptococcus mutans (S. mutans) biofilm was formed for three days in hydroxyapatite discs. Posteriorly, S. mutans colony forming units (CFU) were evaluated. For SBS analysis, Analysis of Variance was used, followed by the Tukey test, at a 5% statistical significance level. The CFU data were analyzed by Kruskal-Wallis, followed by Dunn as a post-hoc test. The ARI results were analyzed descriptively. Results: There was no statistically significant difference in SBS values between the experimental and control groups (p>0.05). A 3% incorporation of Ag@SiO2 NPs statistically reduced the SBS values (p<0.05) compared to the 1% group. The addition of 3% of Ag@SiO2 NPs to the composites significantly reduced S. mutans biofilm formation, compared to group G2 (p<0.05). Conclusion: Composites incorporating 3% of Ag@SiO2 NPs presented similar SBS values compared to the control group, and showed significant antimicrobial activity.

Abstract We evaluated the efficacy of xylitol varnishes on the remineralization of newly erupted permanent and deciduous teeth in vitro and in situ. Human enamel specimens were randomly allocated to 8 groups (n = 15/group). Artificial caries lesions were produced and enamel alterations were quantified by surface/subsurface hardness and transverse microradiography. The blocks were then treated with the following varnishes: DuraphatTM; 20 wt% xylitol (146 μm) varnish; 20 wt% milled xylitol (80 μm) varnish, and placebo varnish, and removed after 6 h of immersion in artificial saliva. In vitro the blocks were subjected to pH-cycles for 8 days. In situ fifteen subjects wore palatal appliances containing four pre-demineralized and treated enamel specimens, for 5 days. Data were statistically analyzed by ANOVA/Tukey and Kruskal-Wallis/Tukey’s test (p < 0.05). The %SHR in both studies was significantly increased by xylitol and Duraphat™ varnishes when compared to placebo. Considering subsurface remineralization, only the xylitol varnishes were able to significantly reduce the enamel lesion. Xylitol varnishes can be promising alternatives to promote enamel remineralization of newly erupted permanent and deciduous teeth.

Abstract Clinical trials have identified secondary caries and bulk fracture as the main causes for composite restoration failure. As a measure to avoid frequent reinterventions for restoration replacement, composites with some sort of defense mechanism against biofilm formation and demineralization, as well as materials with lower susceptibility to crack propagation are necessary. Also, the restorative procedure with composites are very time-consuming and technically demanding, particularly concerning the application of the adhesive system. Therefore, together with bulk-fill composites, self-adhesive restorative composites could reduce operator error and chairside time. This literature review describes the current stage of development of remineralizing, antibacterial and self-healing composites. Also, an overview of the research on fiber-reinforced composites and self-adhesive composites, both introduced for clinical use in recent years, is presented.

Objective: To evaluate the in vitro changes on the enamel surface after a micro-abrasion treatment promoted by different products. Material and Methods: Fifty (50) fragments of bovine enamel (15 mm × 5 mm) were randomly assigned to five groups (n=10) according to the product utilized: G1 (control)= silicone polisher (TDV), G2= 37% phosphoric acid (3M/ESPE) + pumice stone (SS White), G3= Micropol (DMC Equipment), G4= Opalustre (Ultradent) and G5= Whiteness RM (FGM Dental Products). Roughness and wear were the responsible variables used to analyze these surfaces in four stages: baseline, 60 s and 120 s after the micro-abrasion and after polishing, using a Hommel Tester T1000 device. After the tests, a normal distribution of data was verified, with repeated ANOVA analyses (p≤0.05) which were used to compare each product in different stages. One-way ANOVA and Tukey tests were applied for individual comparisons between the products in each stage (p≤0.05). Results: Means and standard deviations of roughness and wear (µm) after all the promoted stages were: G1=7.26(1.81)/13.16(2.67), G2=2.02(0.62)/37.44(3.33), G3=1.81(0.91)/34.93(6.92), G4=1.92(0.29)/38.42(0.65) and G5=1.98(0.53)/33.45(2.66). At 60 seconds, all products tended to produce less surface roughness with a variable gradual decrease over time. After polishing, there were no statistically significant differences between the groups, except for G1. Independent of the product utilized, the enamel wear occurred after the micro-abrasion. Conclusions: In this in vitro study, enamel micro-abrasion presented itself as a conservative approach, regardless of the type of the paste compound utilized. These products promoted minor roughness alterations and minimal wear. The use of phosphoric acid and pumice stone showed similar results to commercial products for the micro-abrasion with regard to the surface roughness and wear.