Resumo Resíduos da lapidação de vidros (RLV) são rejeitos finos do beneficiamento de vidros para construção civil, comumente descartados e não recicláveis. O presente estudo analisou a utilização destes resíduos na composição de argamassa de cimento Portland, substituindo parcialmente o agregado convencional, visando uma melhor compactação. Adotaram-se percentuais de resíduos em 0% (referência), 5%, 10% e 20% em massa, substituindo o agregado miúdo (areia). O aglomerante utilizado foi o cimento Portland CP IV-32. O RLV e agregado miúdo foram submetidos a ensaios físicos, através de análise granulométrica, forma dos grãos e massa específica; RLV e cimento, por sua vez, submetidos à análise química por espectrometria de raios-X, para identificação dos compostos. Para avaliação da resistência à compressão e análise da compactação do compósito em estado endurecido, foram confeccionados corpos de prova cilíndricos 50x100 mm. ANOVA (Analisys of Variance) e Coeficiente de Variação mostraram que o RLV adicionado em 5% resultou menores índices de vazios e absorção de umidade do que o convencional. Os testes também mostraram que 5% do resíduo no compósito apresenta o melhor desempenho mecânico por compressão (30,2 MPa), superando o convencional.
Abstract Glass lapping residues (RLV) are fine tailings from the processing of glass for civil construction, commonly non-recyclable. The present study analyzed the use of these residues in Portland cement mortar composition, partially replacing the conventional aggregate, aiming at better compaction. Percentages of residues were adopted at 0% (reference), 5%, 10% and 20% by mass, replacing the fine conventional aggregate (sand). The binder used was Portland cement CP IV-32. The RLV and fine aggregate were submitted to physical tests, through grain size analysis, grain shape and specific mass; RLV and cement, in turn, submitted to chemical analysis by X-ray spectrometry, to identify the compounds. To evaluate the compressive strength and compaction analysis of the composite in the hardened state, cylindrical specimens 50x100 mm were produced. ANOVA (Analisys of Variance) and Coefficient of Variation showed that the RLV added in 5% resulted in lower voids indexes and moisture absorption than the conventional one. The tests also showed best mechanical performance on compression analisys (30,2 MPa) for 5% of residues in the composite, surpassing the conventional one.