ABSTRACT This study aimed to calibrate and test the SARRA-H (Système d’Analyse Régionale des Risques Agroclimatologiques) crop model for cowpea, as well as conducting a climate risk zoning for this crop in a region located in Eastern Amazon, allowing the identification of locations and sowing dates that favor the production considering both the water deficit and the probability of occurrence of severe rains during the harvest period. The model was calibrated and validated with data from experiments conducted between 2013 and 2016 in the municipality of Castanhal, PA, Brazil. Low climate risk areas were defined as those that had a water requirement satisfaction index (WRSI) greater than or equal to 0.5 in the reproductive phase combined with the occurrence of rainfall below 20 mm at the harvest for, at least, 80% of the years for which planting was simulated. The model was able to simulate the water balance, growth and development of cowpea under the climate and soil conditions of the studied location with high precision and accuracy. The optimal period for sowing cowpea comprises the interval between June 5th and 25th for regions located above 2° S and between March 25th and April 15th for regions below 2º S. SARRAH SARRA H Système dAnalyse d Analyse Agroclimatologiques Amazon 201 Castanhal PA Brazil WRSI (WRSI 05 0 5 0. 2 least 80 simulated balance accuracy th º 8

RESUMO Esta pesquisa teve como objetivo calibrar e testar o modelo de cultura SARRA-H (Système d’Analyse Régionale des Risques Agroclimatologiques) para o caupi, bem como realizar o zoneamento de risco climático para esta cultura em uma região localizada na Amazônia Oriental, a fim de permitir a identificação de locais e datas de semeadura que favoreçam a produção considerando tanto o déficit hídrico como a probabilidade de ocorrência de chuvas severas durante o período da colheita. O modelo foi calibrado e validado com dados de experimentos realizados entre 2013 e 2016 no município de Castanhal, PA. As áreas de baixo risco climático foram definidas como aquelas que apresentaram índice de satisfação da necessidade hídrica (WRSI) maior ou igual a 0,5 na fase reprodutiva combinado com a ocorrência de chuvas abaixo de 20 mm na colheita por, pelo menos, 80% dos anos onde foi simulado o plantio. O modelo foi capaz de simular o balanço hídrico, crescimento e desenvolvimento do feijão-caupi nas condições climáticas e de solo da região estudada com boa precisão e exatidão. O período de ótima semeadura para o feijão-caupi compreende o intervalo entre 5 e 25 de junho para regiões localizadas acima de 2° S, e entre 25 de março e 15 de abril para regiões abaixo de 2º S. SARRAH SARRA H Système dAnalyse d Analyse Agroclimatologiques caupi Oriental 201 Castanhal PA WRSI (WRSI 05 0 0, 2 por menos 80 plantio feijãocaupi feijão exatidão S 1 º 8

ABSTRACT Cowpeas are of high socioeconomic importance in the North and Northeast regions of Brazil, whereby the search for alternatives that offer increased productivity with financial returns has become an important challenge. Thus, the objective of this study was to estimate and evaluate the economic indicators of cowpea production in 2015 and 2016 when applying drip irrigation to different depths. Irrigation treatments were based on crop evapotranspiration (ETc). The experiment was laid in a randomized complete blocks design with four treatments (0, 25, 50, and 100% ETc) and six replications. For economic analysis, the results were extrapolated to an area of one hectare. Productivity in 2015 was lower than that in 2016; however, in all treatments, it was always higher when plants were grown under adequate water supply. In both years, the total operating costs were higher under irrigation than under rainfed conditions. The 100% ETc treatment resulted in a greater number of cowpea bags (60 kg) produced and a higher gross revenue than the rainfed treatment by 17 bags ha-1, equivalent to 1,020 kg ha-1 (gross revenue US$ 711.48) and 16 bags ha-1, equivalent to 960 kg ha-1 (gross revenue US$ 867.12), in 2015 and 2016, respectively. Water deficit limited cowpea yield in both years but made cultivation economically unfeasible only in 2015. Brazil challenge Thus 201 depths ETc. . (ETc) 0, 0 (0 25 50 100 replications analysis hectare however supply conditions 60 (6 1 ha1, ha1 ha 1, 1020 020 1,02 ha- US 711.48 71148 711 48 96 867.12, 86712 867.12 , 867 12 867.12) respectively 20 (ETc ( 2 5 10 6 102 02 1,0 711.4 7114 71 4 9 8671 867.1 86 711. 7 867. 8

RESUMO O feijão-caupi apresenta grande importância socioeconômica nas regiões Norte e Nordeste do Brasil, sendo que a busca por alternativas que ofereçam aumento de produtividade com retorno financeiro tem se tornado um importante desafio. Assim, o objetivo deste trabalho foi estimar e avaliar os indicadores econômicos da produção de feijão-caupi nos anos de 2015 e 2016 quando da aplicação de irrigação por gotejamento em diferentes lâminas. Os tratamentos de irrigação foram baseados na evapotranspiração da cultura (ETc). O experimento foi instalado em blocos ao acaso com quatro tratamentos (0, 25, 50 e 100% da ETc) e seis repetições. Para análise econômica, os resultados foram extrapolados para uma área de um hectare. A produtividade em 2015 foi inferior à de 2016; porém, em todos os tratamentos, a produtividade foi sempre maior quando as plantas foram cultivadas sob irrigação adequada. Em ambos os anos, os custos operacionais totais foram maiores sob irrigação do que sob condições de sequeiro. O tratamento 100% ETc resultou em maior número de sacas de feijão-caupi (60 kg) produzidas e receita bruta superior ao tratamento de sequeiro em 17 sacas ha-1, equivalente a 1.020 kg ha-1 (receita bruta US$ 711,48) e 16 sacas ha-1, equivalente a 960 kg ha-1 (receita bruta US$ 867,12), em 2015 e 2016, respectivamente. A deficiência hídrica limitou a produtividade do feijão-caupi nos dois anos, mas inviabilizou economicamente o cultivo apenas em 2015. feijãocaupi feijão caupi Brasil desafio Assim 201 lâminas ETc. . (ETc) 0, 0 (0 25 5 100 repetições econômica hectare porém adequada 60 (6 1 ha1, ha1 ha 1, 1020 020 1.02 ha- US 711,48 71148 711 48 96 867,12, 86712 867,12 , 867 12 867,12) respectivamente 20 (ETc ( 2 10 6 102 02 1.0 711,4 7114 71 4 9 8671 867,1 86 1. 711, 7 867, 8

Abstract This study aimed to assess the influence of the file format on the image quality parameters (image noise, brightness, and uniformity) of periapical radiographs acquired with different digital systems. Radiographic images of an acrylic phantom were acquired with two digital systems - Digora Toto and Express, and exported into five different file formats - TIFF, BMP, DICOM, PNG, and JPEG. Image noise, image brightness (mean of gray values), and image uniformity (standard deviation of gray values) were evaluated in all images. A two-way analysis of variance with Tukey’s test as a post-hoc test was used to compare the results, considering the file formats and radiographic systems as the studied factors. A significance level of 5% was adopted for all analyses. The DICOM image file format presented lower image noise, higher brightness (higher mean gray values), and greater image uniformity (p<0.001) than the other file formats, which did not differ from each other for both digital radiography systems (p>0.05). The Express system revealed lower image noise and greater image uniformity than the Digora Toto system regardless of the image file format (p<0.001). Moreover, the Express showed higher brightness than the Digora Toto for all image file formats (p<0.001), except for the DICOM image file format, which did not significantly differ between the digital radiography systems tested (p>0.05). The DICOM image file format showed lower image noise, higher brightness, and greater image uniformity than the other file formats (TIFF, BMP, PNG, and JPEG) in both digital radiography systems tested. TIFF BMP PNG JPEG values, values , standard twoway way Tukeys Tukey s posthoc post hoc results factors 5 analyses p<0.001 p0001 p 0 001 (p<0.001 p>0.05. p005 p>0.05 . 05 (p>0.05) p<0.001. Moreover p<0.001, (TIFF p<0.00 p000 00 (p<0.00 p00 p>0.0 (p>0.05 p<0.0 (p<0.0 p0 p>0. (p>0.0 p<0. (p<0. p>0 (p>0. p<0 (p<0 p> (p>0 p< (p< (p> (p

Resumo Este estudo teve como objetivo avaliar a influência do formato do arquivo nos parâmetros de qualidade de imagem (ruído de imagem, brilho e uniformidade) de radiografias periapicais adquiridas com diferentes sistemas digitais. As imagens radiográficas de um fantoma de acrílico foram adquiridas com dois sistemas digitais - Digora Toto e Express, e exportadas em cinco formatos de arquivo diferentes - TIFF, BMP, DICOM, PNG e JPEG. O ruído da imagem, o brilho da imagem (média dos valores de cinza) e a uniformidade da imagem (desvio padrão dos valores de cinza) foram avaliados em todas as imagens. A análise de variância (ANOVA) bidirecional com o teste post-hoc de Tukey foi aplicada para comparar os resultados, considerando os formatos de arquivo e os sistemas radiográficos como os fatores estudados. Um nível de significância de 5% foi adotado para todas as análises. O formato de arquivo de imagem DICOM apresentou menor ruído de imagem, maior brilho (maiores valores médios de cinza) e maior uniformidade de imagem (p<0,001) do que os outros formatos de arquivo, que não diferiram entre si para ambos os sistemas de radiografia digital (p>0,05). O sistema Express apresentou menor ruído de imagem e maior uniformidade de imagem que o sistema Digora Toto, independentemente do formato do arquivo de imagem (p<0,001). Além disso, o Express mostrou maior brilho do que o Digora Toto para todos os formatos de arquivo de imagem (p<0,001), exceto para o formato de arquivo de imagem DICOM, que não diferiu significativamente entre os sistemas de radiografia digital testados (p>0,05). O formato de arquivo de imagem DICOM mostrou menor ruído de imagem, maior brilho e maior uniformidade de imagem do que os outros formatos de arquivo (TIFF, BMP, PNG e JPEG) em ambos os sistemas de radiografia digital testados. TIFF BMP JPEG média cinza desvio ANOVA (ANOVA posthoc post hoc resultados estudados 5 análises maiores p<0,001 p0001 p 0 001 (p<0,001 p>0,05. p005 p>0,05 . 05 (p>0,05) p<0,001. disso p<0,001, , (TIFF p<0,00 p000 00 (p<0,00 p00 p>0,0 (p>0,05 p<0,0 (p<0,0 p0 p>0, (p>0,0 p<0, (p<0, p>0 (p>0, p<0 (p<0 p> (p>0 p< (p< (p> (p

In the present work, dried aerial parts of Baccharis ligustrina (Asteraceae) were subjected to microwave assisted extraction (MAE) using aqueous solution of 1-butyl-3-methylimidazolium bromide (BMImBr) and the obtained extract was successively partitioned using hexane and EtOAc. Using reduced amounts of extracts and efficient chromatographic steps, four acyl C6C3 derivatives (n-hexacosyl ferulate, n-hexacosyl, n-octacosyl, and n-triacontyl p-coumarates) were obtained from hexane phase whereas two C6C3 acids (ferulic and p-coumaric) were obtained from EtOAc phase. Isolated phenylpropanoids were evaluated against amastigote forms of parasite Trypanosoma cruzi. As result, it was observed that p-coumaric and ferulic acids were inactives whereas alkyl derivatives displayed EC50 values of 6.5 µmol L-1 (n-octacosyl p-coumarate), 9.3 µmol L-1 (n-triacontyl p-coumarate), 15.7 µmol L-1 (n-hexacosyl p-coumarate), and 32.2 µmol L-1 (n-hexacosyl ferulate). All tested compounds displayed reduced toxicity against NCTC cells (CC50 > 200 mmol L-1). work Asteraceae (Asteraceae MAE (MAE 1butyl3methylimidazolium butylmethylimidazolium 1 butyl 3 methylimidazolium BMImBr (BMImBr steps CC C C6C nhexacosyl n hexacosyl ferulate nhexacosyl, hexacosyl, n-hexacosyl noctacosyl, noctacosyl octacosyl, octacosyl n-octacosyl ntriacontyl triacontyl pcoumarates p coumarates p-coumarates pcoumaric coumaric cruzi result EC EC5 65 6 5 6. L1 L L- pcoumarate, pcoumarate coumarate , p-coumarate) 93 9 9. 157 15 7 15. 322 32 2 32. ferulate. . ferulate) CC50 (CC5 20 L1. L-1) p-coumarate CC5 (CC

Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and surface of the adsorbents were characterized by different techniques such as scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS), N2 adsorption/desorption isotherms with Brunauer-Emmett-Teller (BET) method and Barret-Joyner-Hallenda (BJH) method, Fourier transform infrared spectroscopy (MID/FTIR), X-ray diffraction (XRD), and the point of zero charge (PZC). The adsorbent synthesized with H3PO4 at 400 ºC displayed the best performance in removing dye molecules in 10 mg.L-1 solution, with a removal rate of approximately 100% when using a concentration of 2 g.L-1 in particle size of 0.42 mm. Besides that, the adsorbent synthesized with H3PO4 had a particle diameter of approximately 15 Å, a size corresponding to the nanometer range, presented a crystallinity structure with well-defined phases such as quartz and the major elements in the composition were carbon and silicon. The surface area of the ashes enlarged from 14.71 to 448.1 m2.g-1 when H3PO4 was used as an activator, producing a high-quality adsorbent, with an excellent cost-benefit, being it possible to be produced for a price of 9.35 USD.kg-1, a price lower than the commercial activated carbon, making it a promising candidate for application in an industrial environment.

Resumen Este estudio tuvo como objetivo describir los aspectos imaginológicos de una concha bullosa hallada incidentalmente por medio de imágenes de tomografía computarizada de haz cónico (TCHC). Una paciente de sexo femenino fue sometida a examen de TCHC y se verificó una neumatización extensa bilateral de la concha media, presentando una mayor dimensión del lado derecho, asi como desvío del tabique. El paciente refirió obstrucción nasal y pérdida del olfato. La TCHC de la región maxilofacial permitió localizar este hallazgo incidental, permitiendo derivar al paciente para el tratamiento adecuado.

Abstract This study aimed to describe the imaging aspects of a concha bullosa discovered incidentally by means of cone-beam computed tomography (CBCT) imaging. A female patient underwent a CBCT exam, and a bilateral extensive pneumatization of the middle concha was verified, presenting a larger dimension of the right side and a deviated septum. The patient reported nasal obstruction and loss of smell. The CBCT for covering the maxillofacial region allowed the discovery of this incidental finding, allowing the patient to be referred for appropriate treatment.

Abstract Peanuts are an important legume for the Northeastern Brazilian market, but their production in this region is low. The present study aimed to evaluate the effect of biofertilizer doses on peanut nodulation and production components, to define the best dose and genotype. The experiment was conducted in a completely randomized block design (DBC) in a 3 x 3 factorial arrangement, with three replications. The treatments consisted of two evaluation factors: 1) Fertilization via different doses of organic fertilizer applied to the substrate (D1 = 0mL; D2 = 500mL; and D3 = 1000mL); and 2) Peanut genotypes (BR-1, UNI43 and UNI08). The following traits were assessed: number of nodules per plant (NNP), number of mature pods (NVM), pod mass per plant (MVP), seed mass per plant (MSP) and root length (CR). Peanut production is affected by fertilization via bovine biofertilizer, mainly for the components NVM, MVP and MSP. Besides, nodulation is a likely conditioner. The 1000mL dose proved to be the best treatment for the traits analyzed, and UNI08 accession, the most responsive material.

We have optimized the experimental conditions for the silver(I)-promoted oxidative coupling of methyl p-coumarate (I) and methyl ferulate (II), which is the most frequently used methodology to synthesize the bioactive dihydrobenzofuran neolignans 1 ((±)-trans-dehydrodicoumarate dimethyl ester) and 2 ((±)-trans-dehydrodiferulate dimethyl ester). Most of the tested conditions affected the conversion (i.e., the consumption of I and II) and the selectivity (i.e., the percentage of I and II that was converted into 1 and 2, respectively), so the optimized conditions were the ones that afforded the best balance between conversion and selectivity. Silver(I) oxide (0.5 equiv.) is the most efficient oxidant agent amongst the silver(I) reagents that were tested to convert methyl esters I and II into compounds 1 and 2, respectively. Acetonitrile, which has not yet been reported as a solvent for this reaction, provided the best balance between conversion and selectivity, besides being “greener” than other solvents that are more often employed (e.g., dichloromethane and benzene). Under the optimized conditions, the reaction time decreased from 20 to 4 h without significantly impacting the conversion and selectivity.

We evaluated the effects of exercise training (ET) on the profile of mood states (POMS), heart rate variability, spontaneous baroreflex sensitivity (BRS), and sleep disturbance severity in patients with obstructive sleep apnea (OSA). Forty-four patients were randomized into 2 groups, 18 patients completed the untrained period and 16 patients completed the exercise training (ET). Beat-to-beat heart rate and blood pressure were simultaneously collected for 5 min at rest. Heart rate variability (RR interval) was assessed in time domain and frequency domain (FFT spectral analysis). BRS was analyzed with the sequence method, and POMS was analyzed across the 6 categories (tension, depression, hostility, vigor, fatigue, and confusion). ET consisted of 3 weekly sessions of aerobic exercise, local strengthening, and stretching exercises (72 sessions, achieved in 40±3.9 weeks). Baseline parameters were similar between groups. The comparisons between groups showed that the changes in apnea-hypopnea index, arousal index, and O2 desaturation in the exercise group were significantly greater than in the untrained group (P<0.05). The heart rate variability and BRS were significantly higher in the exercise group compared with the untrained group (P<0.05). ET increased peak oxygen uptake (P<0.05) and reduced POMS fatigue (P<0.05). A positive correlation (r=0.60, P<0.02) occurred between changes in the fatigue item and OSA severity. ET improved heart rate variability, BRS, fatigue, and sleep parameters in patients with OSA. These effects were associated with improved sleep parameters, fatigue, and cardiac autonomic modulation, with ET being a possible protective factor against the deleterious effects of hypoxia on these components in patients with OSA.

RESUMEN La gangliosidosis GM1 es un trastorno lisosomal caracterizada por la acumulación de gangliósido GM1 (glucoesfingolípido) en el sistema nervioso central (SNC) y visceral, debido a la deficiencia de la enzima beta-galactosidase (hidrolasa lisosomal). Afecta principalmente al SNC y las vísceras y produce importantes anomalías esqueléticas, que a menudo ocurren con la presencia de linfocitos vacuolados en la muestra de la sangre periférica o médula ósea. Tiene tres formas de presentación, lo que dificulta aún más su identificación debido al amplio espectro clínico. El presente estudio tiene como objetivo describir un caso de gangliosidosis GM1 en un paciente masculino, nacido a las 38 semanas. Hasta el momento, no existe un tratamiento efectivo para la gangliosidosis GM1, es decir, el portador de la enfermedad solo recibe medidas sintomáticas y paliativas. Por tanto, el diagnóstico precoz de la enfermedad es de suma importancia, ya que su única forma de prevención, actualmente, es a través del consejo genético.

This study presents a microwave-assisted procedure for sample preparation of cocoa beans using diluted HNO3 with H2O2 for the determination of Ba, Ca, Cu, K, Mg, Mn, P, S, Sr and Zn by inductively coupled plasma optical emission spectrometry (ICP OES). Doehlert modified design was used for optimization of experimental condition, and the volume of H2O2 (0, 0.5, 1.75 and 3 mL) and concentration of HNO3 (0.5, 3.75 and 7 mol L-1) were evaluated. The best experimental conditions were chosen considering lower residual acidity (RA), lower dissolved organic carbon (DOC) and the acceptable trueness range (80-120%), were 5 mL of 3.75 mol L-1 HNO3 and 1.75 mL of 30% v v-1 H2O2. The procedure was validate using certified reference materials (CRMs), digested using the optimized conditions. The proposed procedure was applied in twelve samples of cocoa beans, and the concentrations (mg kg-1) ranged from: 7.6-27 (Ba), 520-1955 (Ca), 11-26 (Cu), 6212-10855 (K), 1677-2516 (Mg), 13-29 (Mn), 4679-6104 (P), 1499-1898 (S), 7-32 (Sr) and 34-46 (Zn). A Pearson correlation plot was proposed to evaluate the correlation between elements, revealing high correlations between Mg and K; K and P; Cu and Mn; Cu and Zn; Cu and S.

RESUMO Com o surgimento de grandes fazendas de cultivo de microalgas e aumento da competição nesse setor, é comum a busca por maior produtividade. Uma maneira de alcançar esse objetivo na produção de microalgas é otimizar os fatores que influenciam o crescimento das mesmas, durante a etapa de cultivo, para aumentar o acúmulo de biocompostos de interesse. Nesta etapa, os fatores que mais influenciam são: nutrição, difusão de gases, intensidade e qualidade luminosa e, por último, agitação, que afeta diretamente todos os demais fatores. Desta forma, foi realizada no presente estudo uma revisão e também uma avaliação da influência e importância da agitação. Os nutrientes que mais influenciam o acúmulo de biomassa são o carbono, nitrogênio e fósforo, porém, a proporção dos mesmos está diretamente relacionada ao objetivo proposto para a microalga. Na difusão de gases, é imprescindível o fornecimento de CO2 adequado para o crescimento das microalgas, podendo-se utilizar gases de queima. Além disso, deve-se garantir a remoção adequada de O2 produzido pela fotossíntese, que poderia inibir o metabolismo da microalga e diminuir sua taxa de crescimento. É importante fornecer a intensidade luminosa adequada para a fotossíntese, porém, o excesso pode provocar fotoinibição no cultivo. A agitação é de suma importância para garantir a distribuição dos nutrientes no meio, a difusão de gases (incorporação de CO2 e remoção de O2) e adequada exposição das microalgas à luz, reduzindo os efeitos de fotoinibição e de auto sombreamento.

ABSTRACT Due to the emergence of large microalgae farms and increased competition in this sector, the search for higher productivity is common. One way to achieve this goal in microalgae production is to optimize the factors that influence their growth during the cultivation stage to increase the accumulation of bio-compounds of interest. In this stage, the factors that most influence are: nutrition, gas diffusion, light intensity and quality and, finally, stirring, which directly affects all other factors. Thus, a review and an evaluation of the influence and importance of stirring were performed in the present study. The nutrients that most influence biomass accumulation are carbon, nitrogen and phosphorus, but their proportion is directly related to the proposed objective for microalgae. In the diffusion of gases, it is essential to supply adequate CO2 for the growth of microalgae, and flue gases can be used. Also, it is necessary to ensure proper removal of photosynthetic O2, which could inhibit microalgae metabolism and slow their growth rate. It is important to provide the appropriate light intensity for photosynthesis, but excess may cause photoinhibition in cultivation. Stirring is of paramount importance to ensure nutrient distribution in the medium, gas diffusion (incorporation of CO2 and removal of O2) and adequate exposure of microalgae to light, reducing the effects of photoinhibition and self-shading.

Abstract The current paper implementates a simple fully non-linear Kirchhoff-lovel shell penalty based finite element. The 6 nodes and 21 DoF triangular element developed in this work has a quadratic displacement field associated to it and the C1 continuity required by Kirchhoff-Love Hyphotesis is approximated by an internal penalty. The biggest novelty in this article is the simultaneous use of penalty and a Rodrigues incremental Rotation parameter (scalar DOF) between neighboring elements further explained in the text. The nonlinear finite element model developed in this article is compared to analytical results, commercial finite element code and another FEM model developed in bibliography. Simulations have demonstrated consistency when comparing results to other models and it is deemed that reliable mesh generation together with a powerfull triangular finite element is a good option for trustworthy thin shell simulations.

ABSTRACT The timing of phenological events varies within and among populations, affecting the performance of individual plants differently. We evaluated the effects of relative variation in sprouting time on the display of reproductive events, vegetative growth and herbivory in Copaifera langsdorffii (Fabaceae). A total of 93 trees of C. langsdorffii was monitored daily to determine their sprouting time. We collected ten terminal branches of each plant to evaluate vegetative growth, production of defense compounds and insect herbivore damage. The sprouting time for the studied population lasted 67 days. Variation in sprouting time did not affect the probability of plants to enter the reproductive stage. Plants that entered the reproductive stage showed greater vegetative biomass. Variation in sprouting time had a negative relationship with branch growth and a positive relationship with the number of leaflets. Leaf phenol concentration did not vary in relation to sprouting time or plant phenology, but herbivory was higher in plants that sprouted later. The relationships among plant sprouting time, vegetative development and display of reproductive stage in C. langsdorffii are discussed. The results of this study also suggest that early sprouting prior to the rainy season is a strategy used by C. langsdorffii to escape herbivores attacks.