Abstract The spatial variability of physical properties, such as bulk density, penetration resistance and gravimetric moisture, obtained by applying geostatistics in precision agriculture, can effectively indicate the physical behavior of agricultural soils in longitudinal profiles. In this way, the spatial dependence of physical properties in streets of coffee plantations with different lengths was evaluated in the southern Minas Gerais, Brazil. For this purpose, five longitudinal profiles were measured in streets, each one with depths ranging from 0 to 0.60 m, in six layers of 0.10 m, being the database composed of 432 property, 144 by property, submitted to the ordinary kriging geostatistical method in order to obtain spatial variability maps using the R software. They were evaluated by the lower mean cross-validation error of theoretical models fitted by ordinary least squares (OLS), being detected in higher superficial layers, from 0 to 0.30 m, lower bulk density and lower penetration resistance, with variable gravimetric moisture in the length direction of some streets of coffee plantations, being that these properties presented different structures of spatial dependence for each street.

Abstract Precision agriculture is an alternative for reducing costs. This study evaluated and economically compared three sampling methods used in precision agriculture with respect to the acquisition of inputs and machines and equipment. The sampling methods used were zone management by elevation (ZME), grid sampling (GS) and sampling guided by apparent electrical conductivity of the soil (OS). Soil samples for the ZME were collected after the definition of zones according to the elevations of the plots. The sample mesh was in a georeferenced mesh of 100 x 100 m. The targeted sampling was performed after a ground proximity sensor was used to identify the apparent electrical conductivity of the soil to define the management areas. From the results of the laboratory tests, the application costs were calculated for lime, phosphorus, potassium and nitrogen to allow a comparison between the methods, volumes and costs. This approach considered the costs of depreciation, insurance, interest, operating costs, labor, maintenance and fuel. With this study, it was possible to compare the volumes of the recommended fertilizers and estimate the overall economic cost of using the technology via sensor. Taking the GS as a reference, the ZME presented as the best alternative compared to other methods.

ABSTRACT The need for treated water is essential for life. With the constant increase in population, the most common way to purify surface water is through conventional water treatment plants (WTPs). The high volume of residue (sludge) generated in this process is most often returned to the catchment site, negatively affecting the ecosystem. The sludge of WTPs is similar to soil because it is composed of inorganic solids. Adobe is a construction material made from water and soil without the burning process, so it is considered sustainable, recyclable, and energy-efficient and can be stabilized with various materials. Therefore, the objective of this work is to develop adobes using the sludge of WTPs and to analyse their physical, mechanical and thermal properties. Adobes were produced with five concentrations of sludge by mass: 0, 1, 3, 5 and 7%. It was observed that with the increase in the sludge concentration, there was an increase in the capillarity and a decrease in mass, the water absorption was limited to 3% of sludge, and there was an increase in the bulk density. The linear shrinkage, thermal conductivity and compressive strength were not influenced. The addition of WTP sludge altered some properties of adobe. The use of WTP sludge in adobe is limited to 3%; above that, the adobe becomes unstable in relation to water. Therefore, the use of WTP sludge in the manufacture of adobe is feasible in controlled concentrations and is a sustainable use of the residue.

ABSTRACT Adobe is an efficient construction material for several reasons, such as its thermal comfort, sustainability, and lower energy cost, as well as the simplicity of its production and execution. However, challenges such as water absorption, capillarity, and compressive strength should be investigated to improve its physical and mechanical properties. “Synthetic termite saliva” (STS) is an excellent stabilizer with high cohesive and hydrophobic power. Therefore, the objective of this work was to evaluate the effects of STS incorporation into adobe, analyzing its physical, mechanical and thermal properties. Five treatments were studied: 0 (control); 0.1; 0.2; 0.4 and 0.8% STS by mass. These adobe samples were evaluated according to bulk density, linear shrinkage, capillarity, water absorption, thermal conductivity and compressive strength, according to Norma Técnica de Edificación (NTE) E0.80 testing using a new methodology. Linear shrinkage decreases from 2.7 to 1.91 cm with 0.4% STS. Capillarity decreases with the increasing amounts of STS. Water absorption decreased from 12.03 to 6.31% using 0.4% STS, and its mass was reduced from 779 to 19 grams. The thermal conductivity showed no differences between concentrations. The compressive strength was reduced but was still acceptable based on NTE E.080. The stabilization of the adobe using STS showed an improvement in its physical properties, mainly due to its hydrophobic power.

RESUMO Uma interessante maneira de se mensurar a eficiência de sistemas produtivos é por meio da análise energética, identificando quais insumos ou operações demandam mais energia. Portanto, objetivou-se no presente trabalho avaliar a eficiência energética de um sistema de criação de frangos de corte, confinados em galpões com tipologia Darkhouse. Foram considerados os fluxos de energia referentes a um ciclo completo de produção, 56 dias, onde foram computadas as entradas e saídas de energia, na forma direta e indireta, por meio da estimação da energia presente na ração, água, máquinas e equipamentos, trabalho humano, galpões, silos, dentre outros que compõem o sistema produtivo, multiplicando-se pelos seus respectivos coeficientes energéticos. Foram encontradas a demanda total de energia pelo sistema em um ciclo de produção, a energia necessária para produção de 1 kg de frango vivo e o coeficiente de eficiência energética do mesmo. O sistema estudado apresentou um coeficiente de conversão da energia de 46%, valor próximo ao encontrado para sistemas de produção animal. Foram necessários, em média, 37,55 MJ kg-1 de frango vivo. O principal ponto estrangulador do sistema correspondeu à energia consumida na forma de ração, com 75% do total da energia direta.

ABSTRACT The objective of this study was to evaluate the sustainability of a broiler chicken production system, with confinement in Darkhouse sheds, by energetic analysis. Energy flows of a complete production cycle, 56 days, were considered, of which the energy inputs and outputs were computed in direct and indirect forms, by estimating the energy coming from the quantity of feed, water, machinery and equipment, human labor, sheds, silos, among other components of the productive system, multiplied by their respective energetic coefficients. The total energy demand of a system in a production cycle for the production of 1 kg of live chicken and its energy efficiency coefficient were determined. The studied system had energy conversion coefficient of 95%, demonstrating that the production model has high energy conversion efficiency and fits a sustainable model. On average, 37.55 MJ kg-1 of live chicken were necessary. The main limiting point of the system corresponded to the energy consumed in the form of feed, with 75% of the total direct energy.