ABSTRACT Cereal cyst nematode is a major pest of small grain cereals, which causes huge yield losses to crops in China and other parts of the world. In this study, the effects of five inorganic ion concentrations on egg hatching of Heterodera avenae were studied. Results revealed that ZnCl2 and FeCl3 promoted hatching of induced and natural diapausing eggs. The cumulative hatching rates of eggs were 49 % and 13 % at 30 mM ZnCl2 and 10 mM FeCl3, respectively, which were higher than those of other treatments. The hatching ability promoted by ZnCl2 is greater than by FeCl3. Diapause induced eggs in ZnCl2 continued to hatch after 10 days; however, those in FeCl3 mainly hatched in the first two weeks. ZnCl2 had obvious stimulating effects on the hatching of natural diapause and non–diapause free eggs at 15 and 30 mM concentrations. FeCl3 promoted the hatching of natural diapause eggs; howevr, it inhibited hatching of non–diapause free eggs. Conversely, different concentrations of inorganic ions did not have any stimulatory effect on white female eggs. In the nematode life cycle, hatching is the critical stage because juveniles may be infected. The results of this study provide useful information the use of new fertilizers (including promoted hatching inorganic ions) applied before planting for controlling nematode diseases caused by H. avenae.

Abstract In this study, we aimed to explore the effect of altitude on reproductive ingredient and sex allocation of different colors of Anemone obtusiloba in populations. The variations of reproductive ingredient and sex allocation of three colors of Anemone obtusiloba in different four altitudinal gradients at the eastern Qinghai Tibetan Plateau were examined. Our results showed that with the increased altitude, gynoecium/flower, androceium/flower and gynoecium/individual were increased, but androceium/individual, gynoecium number/flower, androceium number/flower, gynoecium number/ individual and androceium number/individual in three flower color of Anemone obtusiloba were decreased. Besides, male allocation and ♂/♀ were also decreased, which showed female-biased sex allocation. Furthermore, in the four altitudinal gradients, the individual size of same color was positively correlated with reproductive ingredient, and altitude had a direct impact on size-dependent reproductive ingredient. However, there were not certain correlations between male allocation, ♂/♀ and individual size in the same color of Anemone obtusiloba. Moreover, in the four altitudinal gradients, the reproductive investment of same color was positively correlated with gynoecium and androceium, but there were not certain correlations between male allocation, ♂/♀ and reproductive investment. In conclusion, altitude had a significant effect on reproductive ingredient and sex allocation in different colors of Anemone obtusiloba. Different colors of Anemone obtusiloba all increased of female function with the increased altitude. However, there were difference in influence mechanism of altitude on size-dependent reproductive ingredient and distribution between female and male function of resource.

Abstract In this study, rice protein was used as raw material to explore the effects of γ-irradiation treatment doses (0, 0.5, 1, 2, 3, 5 kGy) on the physicochemical properties of rice protein (particle size, zeta potential, secondary structure, scanning electron microscope microstructure), surface hydrophobicity (H0), thermal stability), functional properties (solubility, water and oil retention, emulsification) and sensory quality. The results show that when the γ-irradiation dose is 2 kGy, the average particle size of rice protein is the smallest, the absolute value of the potential is the highest 33.58 mV, the content of β-sheets in the secondary structure is at least 31.16 ± 0.16, and the content of random curl is at most 14.56 ± 0.06, the surface of the microstructure is rough and the degree of pore depression is the deepest, the highest H0 is 160.45 ± 2.98, the minimum denaturation temperature (Td) and enthalpy (△H) are 70.49 ± 0.05 °C and 1.30 ± 0.01 J/g, which shows that γ-irradiation treatment can be significant affect the physicochemical properties of rice protein. When the irradiation dose is 2 kGy, the highest solubility of rice protein is 69.18 ± 1.07%, and the highest water and oil holding capacity are 5.89 ± 0.08 g/g and 3.45 ± 0.04 g/g, respectively. The highest emulsification activity and emulsification stability are 45.65 ± 1.26 m2/g and 208.33 ± 4.79 min, which shows that γ-irradiation treatment can improve the functional properties of protein. When the irradiation dose was less than 5 kGy, the sensory quality of rice protein was not significantly affected. The research results provide a theoretical basis for the deep processing and value-added utilization of rice protein by γ-irradiation technology.

SUMMARY: Trans-sutural distraction is a biological process that induces the formation of new bone and changes the position of bone by pulling on growing suture under the action of external forces. Currently, therapy to midfacial hypoplasia treated by trans-sutural distraction has been applied. In this study, Beagle dogs were selected as experimental animals, and a traction device designed by ourselves was applied to Beagle dogs to simulate the treatment process of trans-sutural distraction in human face, so as to provide a basis for the subsequent research on the related mechanism of trans-sutural distraction. The objective is that the animal model can provide the basis for the follow-up study of transsutural distraction. 45 month beagle dogs were randomly divided into two groups 3 in experiment group and 3 in control group. Implant nails were implanted as the bone marker in the bilateral zygomatic temporal suture, zygomandibular maxillary suture and palatine transverse suture in experimental group. The traction of the maxilla was carried out by the external cranial traction frame with canine fossa as bearing point, 800g force each side, elastic traction for 15 days. The control group only implanted the implant nail as the bone marker on both sides of the bone suture. The distance between two implant nails was measured by vernier calipers and X-ray examination, compared with preoperative and postoperative changes. X-ray and cephalometric measurements were used to measure change in the cranial basal angle. HE staining was used to observe the width of the bone seams, the morphology and structure of the cells and the tissue of the new bone under the phase contrast microscope. Then descriptive statistical analysis and t-test between two independent samples are carried out for the measurement data. The experimental group had a good retention of the beagle traction frame. In the experimental group, the maxillaries of dogs were protrudent in the process of traction gradually and the occlusal relationship changed to type II malocclusion. When the traction is 15 days, the coverage distance is about 8~9 mm. Before and after the traction, the distance between landmark points indicated that the spacing between the transverse palatine suture was the largest (experimental group: 5.52±0.19 mm control group 1.31±0.06 mm P<0.05), and zygomaticotemporal suture was the second (experimental group: 3.12±0.15 mm, control group 0.73±0.04 mm, P<0.05), and zygomaticomaxillary suture was less (experimental group: 2.60±0.34 mm, control group 0.53±0.05 mm, P<0.05). The cranial basal angle was no change before and after operation (controlgroup: 32.3±1.3°, experimental group: 33.2±1.1° P>0.05. Histology showed that the collagenous fibers in the suture of the control group were denser and the osteoblasts were visible on the edge of the suture, showing osteogenic activity. The experimental group significantly widened suture (experimental group: 1209.388±42.714 µm, control group 248.276±22.864 µm, P<0.05), the number of fibroblasts increased significantly with loose collagen fiber. The direction of cell and fiber arrangement were parallel to the traction force. There were many small blood vessels and marrow cavities, and the bone trabecula around the bone suture was thin (experimental group: 23.684±3.774 mm, control group: 86.810±9.219 mm, P < 0.05), showing active osteogenic activity. The growing beagle dog can be used to establish a suture traction animal model for experimental study. In the experiment, Kirschner wire was used to penetrate the bottom plane of the piriform hole of the maxilla (about the position of the canine fossa at the back) and the traction direction was basically the same as the growth direction, and the maxilla was basically parallel and moved forward.

RESUMEN: La distracción trans-sutural es un proceso biológico que induce la formación de hueso nuevo y cambia la posición del éste al tirar de la sutura en crecimiento bajo la acción de fuerzas externas. Actualmente, se ha aplicado la terapia para la hipoplasia de la cara media tratada por distracción trans-sutural. En este estudio, fueron seleccionados perros Beagle como animales experimentales, y un dispositivo de tracción fue instalado a los perros para simular el proceso de tratamiento de la distracción trans-sutural en el rostro humano. El objetivo fue proporcionar una base para la investigación posterior sobre mecanismos relacionados con la distracción trans-sutural. El modelo animal puede proporcionar la base para este tipo de estudio de seguimiento de la distracción trans-sutural. Perros Beagle de 45 meses de edad se dividieron aleatoriamente en dos grupos: 3 en el grupo experimental y 3 en el grupo control. Los clavos de implante se usaron como marcadores óseos en la sutura temporal cigomática bilateral, la sutura maxilar cigomandibular y en la sutura transversal palatina en el grupo experimental. La tracción del maxilar se realizó mediante el marco de tracción craneal externo con fosa canina como punto de apoyo, 800 g de fuerza a cada lado, tracción elástica durante 15 días. En el grupo control solo se implantó el clavo del implante como marcador óseo en ambos lados de la sutura. La distancia entre dos clavos de implante se midió mediante calibradores de vernier y examen de rayos X, en comparación con los cambios preoperatorios y postoperatorios. Se utilizaron mediciones cefalométricas y de rayos X para medir el cambio en el ángulo basal craneal. La tinción con HE se usó para observar el ancho de las suturas óseas, la morfología y la estructura de las células y el tejido del hueso nuevo bajo el microscopio de contraste de fase. Luego se realizó un análisis estadístico descriptivo y una prueba t entre dos muestras independientes para los datos de medición. El grupo experimental tuvo una buena retención del cuadro de tracción del Beagle. En el grupo experimental, los maxilares de los perros sobresalieron gradualmente en el proceso de tracción y la relación oclusal cambió a maloclusión tipo II. Cuando la tracción era de 15 días, la distancia de cobertura fue de aproximadamente 8 ~ 9 mm. Antes y después de la tracción, la distancia entre los puntos de referencia indicaba que el espacio entre la sutura palatina transversal era más grande (grupo experimental: 5,52 ± 0,19 mm, grupo de control 1,31 ± 0,06 mm, P <0,05), y la sutura cigomáticotemporal fue la segunda. (Grupo experimental: 3,12 ± 0,15 mm, grupo control 0,73 ± 0,04 mm, P <0,05), y la sutura cigomaticomaxilar fue menor (grupo experimental, 2,60 ± 0,34 mm, grupo control 0,53 ± 0,05 mm, P <0,05). El ángulo basal craneal no cambió antes ni después de la operación (grupo control 32,3 ± 1,3, grupo experimental, 33,2 ± 1,1 ° , P> 0,05). La histología mostró que las fibras colágenas en la sutura del grupo control eran más densas y los osteoblastos se observaron en el margen de la sutura, mostrando actividad osteogénica. En el grupo experimental se amplió significativamente la sutura (1209,388 ± 42,714 µm, grupo control 248,276 ± 22,864 µm, P <0,05), el número de fibroblastos aumentó significativamente con fibras colágenas dispersas. La dirección de la disposición de la celda y las fibras era paralela a la fuerza de tracción. Se observó gran cantidad de vasos sanguíneos pequeños, cavidades medulares, y trabéculas óseas alrededor de la sutura ósea (grupo experimental: 23,684 ± 3,774 mm, grupo control: 86,810 ± 9,219 mm, P <0,05), que mostró actividad osteogénica activa. El perro Beagle en crecimiento se puede utilizar para estudios experimentales y así establecer un modelo animal de tracción de sutura. En el proceso, se usó alambre de Kirschner para penetrar en el plano inferior del foramen piriforme del maxilar (aproximadamente en la posición de la fosa canina en la parte posterior) y la dirección de tracción fue básicamente la misma que en el crecimiento.

Abstract At present, the phenomenon of elastoplastic coupling isn’t considered in establishing the mechanics model of the milled mixture of sugar cane. In order to describe elastoplastic coupling and yield characteristics, based on uniaxial confined compression tests and direct shear tests, the evolution of the elastic parameters of the solid fiber with void ratio and the plastic deformation, and the plastic mechanics behavior of the solid fiber is described by Modified Drucker-Prager Cap model, the expressions of the parameters of the plastic mechanics model are derived and the corresponding parameters are calculated; and the elastoplastic coupling mechanics model is established. The evolution of the parameters of the model is achieved by the custom subroutine written in Fortran, the numerical simulation of the elastoplastic coupling model is realized by ABAQUS. The results of uniaxial confined compression tests and finite element simulation show that the elastoplastic coupling mechanics model is more accurate than the non-elastoplastic coupling mechanics model to predict the axial pressure. The results provide an important reference for the analysis and understanding of the milling process of sugar cane and the establishment of an accurate mathematical model of the milled mixture of sugar cane.

SUMMARY: Palatal rugae is an irregular soft tissue, which is located in the front third of the hard palate, and is asymmetrically distributed from the middle suture to the sides. The difference, stability and extensive characteristics of palatal rugae morphology have gradually make it a characteristic indicator of forensic identification. However, a mature digital palatal rugae identification system has not yet been established at present. Feature extraction is the premise of palatal rugae image recognition. In order to obtain palatal rugae feature information in all directions and improve the reliability of forensic identification, it is necessary to collect palatal rugae images from a plurality of different angles. When the collected images are sent to the recognition system, the diversity of angles will often cause problems such as error recognition. If the tilted images are not rotated properly, it will make the forensic identification face many difficulties. To solve the problem of image skew caused by the diversity of acquisition angle, an algorithm based on orientation vector to correct the tilted palatal rugae images was proposed in this paper. Firstly, the criteria for standard palatal rugae image and the selection rules for feature points were set; Secondly, characterizing feature points according to the rules, and fitting two lines and find their direction vector; Finally, to obtain the corrected images, the tilted images were rotated by the angle determined by the two direction vectors. Simulation results show that the proposed algorithm can correct the tilted palatal rugae images collected from different angles and has strong robustness.

RESUMEN: Las rugas palatinas son tejidos blandos irregulares, que se ubican en el tercio frontal del paladar duro y se distribuyen asimétricamente desde la sutura mediana hacia los lados. La diferencia, la estabilidad y las características extensivas de la morfología de las rugas palatinas la han convertido gradualmente en un indicador característico de la identificación forense. Sin embargo, un sistema de identificación de rugas palatinas digitales maduras todavía no se ha establecido en la actualidad. La extracción de características es la premisa del reconocimiento de imágenes de las rugas palatinas. Para obtener información sobre las características de las rugas palatinas en todas las direcciones, y mejorar la confiabilidad de la identificación forense, es necesario recopilar imágenes de las rugas palatinas desde una pluralidad de ángulos diferentes. Cuando las imágenes recogidas se envían al sistema de reconocimiento, la diversidad de ángulos a menudo causará problemas como el reconocimiento de errores. Si las imágenes inclinadas no se giran correctamente, la identificación forense se enfrentará a muchas dificultades. Para resolver el problema del sesgo de la imagen causado por la diversidad del ángulo de adquisición, en este documento se propuso un algoritmo basado en el vector de orientación para corregir las imágenes de las arrugas palatinas inclinadas. En primer lugar, se establecieron los criterios para la imagen de las rugas palatinas estándar, y las reglas de selección para los puntos de características. En segundo lugar, se determinaron puntos de características según las reglas, y se ajustaron dos líneas y encontrar la dirección del vector. Finalmente, para obtener las imágenes corregidas, las imágenes inclinadas se giraron según el ángulo determinado por la dirección de dos vectores. Los resultados de la simulación muestran que el algoritmo propuesto puede corregir las imágenes de rugas palatinas inclinadas recopiladas desde diferentes ángulos y tiene una gran robustez.

ABSTRACT The present study was designed to investigate the effect of FPZ, a total flavonoids ointment topical application from Pouzolzia zeylanica var. microphylla (Wedd.) Masam, Urticaceae, on skin infections in mice. FPZ ointment anti-infective effect was investigated on Staphylococcus aureus-induced skin abscess and skin ulcers in mice by evaluating the variation in abscess volume, histopathology of skin tissue and healing rate. Secondary, it is topical anti-inflammatory activities on carrageenan-induced hind paw edema in mice was estimated. Besides, FPZ ointment fingerprint was performed by using ultra-performance liquid chromatography and FPZ ointment chemical constituents were isolated and identified by repeated column chromatograph and spectroscopic methods. The results revealed that FPZ ointment topical application at the concentration of 2.5–10% could attenuate skin abscess and ulcers and accelerate wound healing, as compared with control group treated with vehicle (p < 0.05). The histological analysis indicated that FPZ ointment acted via inflammation inhibition, granulation promotion and epidermis formation. Moreover, FPZ ointment effectively inhibited carrageenan-induced paw edema in a dose-dependent manner, especially 10% FPZ which showed superior activities in comparison with dexamethasone used as reference drug. FPZ ointment topical application showed a significant anti-infective effect against pyogenic bacterial skin infection in mice.

SUMMARY: Micro-implant stability has always been the focus of orthodontic clinical research.In the experiment, the morphological changes of bone tissue around the micro-implants in self-tapping and assisting implantation were investigated to explore the effect of different implantation on the osseointegration of micro-implants in order to provide some theoretical basis for clinical practice. Six adult male Beagle dogs were selected,three implants were implanted into the left and right maxillary bone of Beagle dogs at the 0th, 4th and 6th week, respectively. One side to self-tapping implantation, the opposite side to assisting implantation. At the 8th week of the experiment, the animals were sacrificed and the micro-implant-bone tissue specimens with the healing time of 8w, 4w and 2w were obtained.The specimens were stained with Toluidine Blue (TB) and photographed under 100X, 200X microscope. Morphology of microimplant- bone interface cells was observed under light microscope. In self-tapping group, there were some fibrous tissues surrounding the micro-implants at the 2th week, the formation of osteoblasts and osteoid was observed at the 4th week, the wavy and lamellar bone tissues were seen at the 8th week.In assisting group,more collagen fibers were deposited around the micro-implant at the 2th week, there were a large number of osteoid-like cells, and the collagen was gradually replaced by the bone tissue at the 4th week, the osteoblasts were active and the osteoblasts were linear arrange and form a laminate bone at the 8th week.Whether implanted self-tapping or assisted implantation, micro-implant-bone interface reconstruction can occur. If the clinical need for early loading force, micro-implant try to choose selftapping implantation. By appropriately prolonging the healing time, the initial stability of the micro-implant under assistive implantation can be improved.

RESUMEN: La estabilidad del microimplante siempre ha sido el foco de la investigación clínica en ortodoncia. En este trabajo se investigaron los cambios morfológicos del tejido óseo alrededor de los microimplantes autorroscantes y se ayudó a la implantación para explorar el efecto de diferentes implantes en la osteointegración de microimplantes con el fin de proporcionar alguna base teórica para la práctica clínica. Se seleccionaron seis perros Beagle machos adultos, y se colocaron tres implantes en los huesos maxilares izquierdo y derecho en la 0ª, 4ª y 6ª semana, respectivamente. De un lado se colocó el implante autorroscante, y del otro lado el implante asistido. En la octava semana, se sacrificaron los animales y se obtuvieron las muestras de microimplante-hueso con el tiempo de cicatrización de 8, 4 y 2 semanas. Las muestras fueron teñidas con azul de toluidina (TB) y fotografiadas bajo aumento de 100X, y microscopio de 200X. La morfología de las células de la interfaz microimplante-hueso se observó bajo microscopio óptico. En el grupo autorroscante, había tejido fibroso que rodeaba los microimplantes a la 2ª semana, se observó la formación de osteoblastos y osteoide a la 4ª semana y de tejido óseo ondulado y lamelar a la 8ª semana. En el grupo asistido, se depositaron más fibras de colágeno alrededor del microimplante en la 2ª semana, hubo un gran número de células similares a osteoide, y el colágeno fue reemplazado gradualmente por el tejido óseo en la 4ª semana; los osteoblastos estaban activos y se ubicaron linealmente formando un hueso laminado en la 8ª semana. Ya sea que el implante sea con autoasistencia o con implantación asistida, puede ocurrir la reconstrucción de la interfaz microimplante-hueso. Si existe la necesidad clínica de una fuerza de carga temprana, el microimplante de elección sería la implantación autorroscante. Al prolongar apropiadamente el tiempo de curación, se puede mejorar la estabilidad inicial del microimplante bajo implantación asistida.

Age estimation plays a very important role in individual recognition in forensic dentistry. Morphological data of 3D pulp cavity of maxillary canines were acquired by oral and craniofacial CT scans. In accordance with inclusion criteria, CT data of 103 patients (51 males and 52 females) were collected at the Department of Radiology, Stomatological Hospital, Shanxi Medical University, China from September 2015 to August 2016. Mimics 17.0 software was used to measure pulp volume of maxillary canines and tooth volume, and to calculate the ratio of pulp volume/tooth volume. SPSS 16.0 software was utilized to analyze and establish database. Linear regression analysis was applied to process data and to establish a linear regression equation for individual age: Y=69.137-621.200 (pulp volume/tooth volume), R=0.544. Subjects were grouped according to gender, deriving the inferred function of male age: Y=64.333-468.811 (pulp volume/tooth volume), R=0.435; the inferred function of female age: Y=76.445-843.186 (pulp volume/tooth volume), R=0.691. The ratio of pulp volume to tooth volume can be used to infer individual age, and can provide a new method and pathway for individual recognition in forensic dentistry.

La estimación de la edad juega un papel importante en el reconocimiento individual en la odontología forense. Los datos morfológicos de la cavidad pulpar tridimensional de los caninos maxilares fueron adquiridos por tomografía computarizada oral y craneofacial. De acuerdo con los criterios de inclusión, se recolectaron datos de 103 pacientes (51 hombres y 52 mujeres) en el Departamento de Radiología del Hospital de Estomatología de la Universidad de Medicina de Shanxi, desde septiembre de 2015 hasta agosto de 2016. Se utilizó el software Mimics 17.0 para medir el volumen de pulpa de los caninos maxilares y el volumen del diente, además, se calculó la relación entre el volumen de la pulpa y el volumen del diente. Se utilizó el software SPSS 16.0 para analizar y establecer las bases de datos. El análisis de regresión lineal se aplicó a los datos del proceso y para establecer la edad individual se aplicó una ecuación de regresión lineal: Y = 69.137-621.200 (volumen de la pulpa / volumen del diente), R = 0.544. Los sujetos se agruparon según el sexo, derivando la función inferida de la edad masculina: Y = 64.333-468.811 (volumen de la pulpa / volumen del diente), R = 0.435; La función inferida de la edad de la mujer: Y = 76.445-843.186 (volumen de la pulpa / volumen del diente), R = 0.691. La relación entre el volumen de la pulpa y el volumen del diente puede usarse para inferir la edad individual y puede proporcionar un nuevo método y forma para el reconocimiento individual en la odontología forense.

To analyze the accuracy rate of a digital image recognition system in matching the palatal rugae Morphology after orthodontic treatment, before orthodontic treatment and to provide theoretical evidence for individual identification in the field of forensic dentistry. High-resolution digital images of the palatal rugae were taken under particular conditions from each patient before and after orthodontic treatment. Features of each digital image were extracted using a digital image recognition system and included in the palatal rugae database. Using an MATLAB software system, information matching of the palatal rugae was performed. From the matching results, the accuracy rate of individual identification of orthodontic patients was 100 %, with a Euclidean distance of 0. The accuracy rate in matching palatal rugae patterns before and after orthodontic treatment was 95.67 %. The results were statistically significant with P < 0.05. Palatal rugae pattern is highly individual-specific. After orthodontic treatment, palatal rugae are morphologically diverse, but these changes do not greatly influence the individual identification in the field of forensic dentistry, which provides a new method of and pathway to forensic identification.

El objetivo de este trabajo consistitó en analizar la tasa de exactitud de un sistema de reconocimiento de imágenes digitales en la adaptación de la morfología de la rugosidad palatina después del tratamiento ortodóncico, antes del tratamiento ortodóncico y proporcionar evidencia teórica para la identificación individual en el campo de la odontología forense. Las imágenes digitales de alta resolución de las rugas palatinas fueron tomadas bajo condiciones particulares de cada paciente antes y después del tratamiento ortodóncico. Las características de cada imagen digital se extrajeron utilizando un sistema de reconocimiento de imagen digital y se incluyeron en la base de datos de rugas palatinas. Utilizando el software MATLAB, se realizó la comparación de información de las rugas palatinas. A partir de los resultados coincidentes, la tasa de exactitud de la identificación individual de los pacientes ortodóncicos fue del 100 %, con una distancia euclídea de 0. La tasa de precisión en los patrones de rugas palatinas coincidentes antes y después del tratamiento ortodóncico fue del 95,67 %. Los resultados fueron estadísticamente significativos con P < 0,05. El patrón palatino de las rugas es altamente individual-específico. Después del tratamiento ortodóncico, las rugas palatinas son morfológicamente diversas, pero estos cambios no influyen mucho en la identificación individual en el campo de la odontología forense, lo que proporciona un nuevo método y vía para la identificación forense.

ABSTRACT Objective: To investigate the effect of second toe-to-hand transfer on the plantar pressure distribution of the donor foot. Methods: Twelve normal fresh-frozen cadaveric foot specimens were subjected to an axial load of 600 N. An F-Scan plantar pressure analysis system was used to measure the forefoot plantar pressure. The testing was performed under the conditions of intact second toe, second toe removal with the second metatarsal head reserved, and second toe removal in combination with the distal one-third of the second metatarsal, respectively. Results: The peak pressure of the second metatarsal head was greater than other four forefoot plantar regions. There was no statistically significant change in the forefoot plantar pressure distribution after the second toe was removed (p > 0.05). When the second toe and the distal one-third of the second metatarsal were removed, the forefoot plantar pressure distribution changed significantly (p < 0.05). Conclusions: An intact second metatarsal is essential for the normal distribution of plantar pressure. Removal of the second toe with the second metatarsal head reserved had little influence on the plantar pressure distribution of the donor foot. Removal of the second toe and distal one-third of the second metatarsal resulted in abnormal plantar pressure distribution. Level of Evidence II, Experimental Study.

BACKGROUND: The occurrence and prevalence of integrons in clinical microorganisms and their role played in antimicrobial resistance have been well studied recently. As screening and detection of integrons are concerned, current diagnostic methodologies are restricted by significant drawbacks and novel methods are required for integrons detection. RESULTS: In this study, three loop-mediated isothermal amplification (LAMP) assays targeting on class 1, 2 and 3 integrons were implemented and evaluated. Optimization of these detection assays were performed, including studing on the reaction temperature, volume, time, sensitivity and specificity (both primers and targets). Application of the established LAMP assays were further verified on a total of 1082 isolates (previously identified to be 397 integron-positive and 685 integron-negative strains). According to the results, the indispensability of each primer had been confirmed and the optimal reaction temperature, volume and time were found to be 65°C, 45 min and 25 µL, respectively. As application was concerned, 361, 28 and 8 isolates carrying intI1, intI2 and intI3 yielded positive amplicons, respectively. Other 685 integron-negative bacteria were negative for the integron-screening LAMP assays, totaling the detection rate and specificity to be 100%. CONCLUSIONS: The intI1-, intI2- and intI3-LAMP assays established in this study were demonstrated to be the valid and rapid detection methodologies for the screening of bacterial integrons.

Objective: Posterior pilon fractures are rare injuries and have not yet gained well recognition. The purpose of this study was to present the treatment outcome for patients with posterior pilon fractures treated with buttress plate. Method: In this retrospective study we identified patients with posterior pilon fractures of the distal tibia who had undergone open reduction and internal fixation at our institute. Between January 2007 and December 2009, 10 patients (mean age, 46.5 years) who had undergone buttress plating via either a posterolateral approach or a dual posterolateral-posteromedial approach, were selected. All 10 patients were available for follow-up. The clinical outcome was evaluated with the American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score and the visual analogue scale (VAS). The radiological evaluation was performed using the osteoarthritis-score (OA-score). Results: Satisfactory reduction and stable fixation were accomplished in all patients. At a mean follow-up of 36.2 months, all patients had good radiological results and showed satisfactory clinical recovery. The mean AOFAS sore was 87.8, the mean OA-score was 0.6, and the mean VAS scores during rest, active motion, and weight-bearing walking were 0.6, 0.8, and 1.4, respectively. Conclusion: Buttress plating for posterior pilon fractures gave satisfactory clinical outcomes. It also ensured rigid fixation which in turn enabled earlier postoperative mobilization. Level of Evidence IV, Retrospective Study.

OBJETIVO: Apresentar nossas experiências no tratamento de más uniões ou não consolidações talares. MÉTODO: Entre janeiro de 2000 e setembro de 2009, 26 pacientes com má união ou não-união depois de fraturas do tálus foram submetidos a tratamento cirúrgico de acordo com os diferentes tipos de deformidade talar. Os desfechos do tratamento foram avaliados pela escala tornozelo-retropé da AOFAS, assim como por radiografias simples. RESULTADOS: 20 pacientes ficaram disponíveis para acompanhamento por 30 (24 a 60) meses. Não houve problema de cicatrização ou infecção das feridas e foram obtidas uniões sólidas em todos os pacientes. As uniões radiológicas foram atingidas em tempo médio de 14 (faixa de 12 a 18) semanas. O tempo médio para concluir o apoio de carga foi 16 (faixa de 14 a 20) semanas. O escore AOFAS médio aumentou significantemente de 36,2 (27 a 43) para 85,8 (74 a 98). CONCLUSÃO: as intervenções cirúrgicas das fraturas mal-unidas ou não consolidadas dos tálus podem produzir resultados satisfatórios e o procedimento apropriado deve ser adotado, de acordo com diferentes tipos de deformidades pós-traumáticas. Nível de Evidência: IV, Estudo retrospectivo.

OBJECTIVE: To present our experiences of treating talar malunions and nonunions. METHOD: Between January 2000 and September 2009, 26 patients with malunions or nonunions after talar fractures underwent surgical treatment according to different types of talar deformities. The treatment outcomes were evaluated using AOFAS ankle-hindfoot scale as well as plain radiographs. RESULTS: 20 patients were available for follow-up for 30 (range, 24 to 60) months. No wound healing problems or infections occurred and solid unions were achieved in all patients. Radiological unions were achieved at a mean time of 14 (range, 12 to 18) weeks. The mean time to complete weight-bearing was 16 (range, 14 to 20) weeks. The mean AOFAS score increased significantly from 36.2 (range, 27 to 43) to 85.8 (range, 74 to 98). CONCLUSION: Surgical interventions for malunions and nonunions after talar fractures can bring about satisfactory outcomes, and the appropriate procedure should be adopted according to different types of posttraumatic deformities. Level of Evidence: IV, Retrospective Study.

OBJETIVO: Investigar os métodos cirúrgicos no tratamento de fratura de tornozelo de Weber tipo C e estimar a necessidade de exploração cirúrgica da sindesmose. MÉTODOS: Quarenta e três pacientes que apresentavam fratura de tornozelo de Weber tipo C foram tratados com redução aberta e fixação interna de outubro de 2004 a dezembro de 2009. Vinte e nove pacientes foram tratados com o procedimento de rotina, que envolve redução aberta e fixação interna, exploração de sindesmose. Nos outros pacientes, foram realizados reparos adicionais. Trinta e quatro pacientes foram acompanhados durante um período médio de 31,2 meses (faixa, 18 a 50 meses), 22 pacientes desse total foram tratados com procedimentos de rotina e 12 foram tratados com exploração cirúrgica adicional da sindesmose. RESULTADOS: Todas as fraturas estavam unidas no período médio de 13,1 semanas (faixa, 10 a 18 semanas), tendo início o apoio de peso total. A escala média de tornozelo e retropé do escore da american orthopaedics foot and ankle society foi 79,86 (faixa, 65 a 98) no grupo procedimentos de rotina e 86,67 (faixa, 78 a 100) no grupo exploração da sindesmose. Os valores do escore de Olerud-Molander foram 77,27 (faixa, 55 a 100) e 86,67 (faixa, 75 a 100), respectivamente. Constatou-se diferença estatisticamente significante entre os dois grupos (P < 0,05). CONCLUSÃO: A exploração cirúrgica da sindesmose é essencial em certas fraturas de tornozelo de Weber tipo C, que torna possível o desbridamento e a redução direta da sindesmose, permitindo maior estabilização da articulação do tornozelo. Nível de evidência III, Estudo retrospectivo comparativo.

OBJECTIVE: to investigate the surgical methods in treating weber type C ankle injury and estimate the necessity of syndesmosis operative exploration. METHODS: forty three patients presenting weber type C ankle injury were treated with open reduction and internal fixation from october 2004 to december 2009. twenty nine patients were treated with routine procedure involving open reduction and internal fixation, syndesmosis exploration. additional repair was performed in the others. thirty four patients were followed during an average time of 31.2 months (range, 18 to 50 months), 22 patients of those were treated with routine procedures and 12 were treated with additional syndesmosis surgical exploration. RESULTS: all the fractures were united within the average time of 13.1 weeks (range, 10 to 18 weeks) and full weight bearing began. the mean ankle and hindfoot scale of the american orthopaedics foot and ankle society score was 79.86 (range, 65 to 98) in the routine procedures group and 86.67 (range, 78 to 100) in the syndesmosis exploration group. the values of olerud-molander score were 77.27 (range, 55 to 100) and 86.67 (range, 75 to 100), respectively. statistcally significant difference was found between the two groups (p<0.05). CONCLUSION: syndesmosis surgical exploration is essential in some weber type C ankle injuries, which make debridement and direct reduction of the syndesmosis possible, allowing higher stabilization of the ankle joint. Level of Evidence III, Retrospective Comparative Study.