Abstract The Photo Fenton process is an alternative process for the treatment of effluents from the textile industry, being a reagent-based chemical on Fe2+ and H2O2 + UV light, whose mechanism consists of oxidizing the pollutants until they are suitable for discharge into bodies of water. This research seeks to determine the optimum concentration of Fe2+ - H2O2 in the treatment of a synthetic textile effluent and, subsequently, to evaluate the efficiency of the system. The synthetic textile effluent was prepared under laboratory conditions, FeSO4 and H2O2 were added at different concentrations, with exposure to UV-A light throughout the process, and it was determined that the optimum concentration of the Photo Fenton reagent was 400 mg L-1 of FeSO4 and 12 ml L-1 of H2O2, a dosage that reduced initial turbidity, color, and COD by 100%, 99% and 83%, respectively, and increased the DO by 11%. Turbidity removal was obtained by carrying out the treatment in an acid medium (pH 3). The presence of Fe2+ promoted the significant removal of COD. The increase in DO was obtained by the presence of H2O2 and UV-A light, and this in turn, had a considerable influence on the removal of effluent color. Regarding the efficiency of the system, it was determined that the Photo Fenton reagent is an excellent alternative for the treatment of textile effluents with high and low organic loads, reducing contaminants derived from industry processes. reagentbased based Fe2 Fe HO H O H2O water subsequently system conditions FeSO concentrations UVA A 40 L1 L 1 L- turbidity color 100 100% 99 83 83% respectively 11 11% pH 3. 3 . 3) turn loads processes 4 10 9 8
Resumo O processo Foto Fenton é uma alternativa para o tratamento de efluentes da indústria têxtil, sendo um reagente à base de Fe2+ e H2O2 + luz UV cujo mecanismo consiste em oxidar os contaminantes até que estejam aptos para lançamento em corpos d'água. O objetivo da pesquisa é determinar a concentração ótima de Fe2+ - H2O2 no tratamento de um efluente têxtil sintético e avaliar a eficiência do sistema. Um efluente têxtil sintético foi preparado em condições de laboratório, FeSO4 e H2O2 foram adicionados em diferentes concentrações com exposição à luz UV-A durante todo o processo. Daí se determinou a concentração ideal do reagente Foto Fenton era 400 mg L-1 Fe2+ e 12 ml L-1de H2O2, dosagem que conseguiu reduzir a turbidez, cor e DQO inicial em 100%, 99% e 83%, respectivamente, e conseguiu aumentar a OD em 11%. A remoção da turbidez foi obtida realizando o tratamento em meio ácido (pH 3), a presença de Fe+2 favoreceu a remoção significativa de DQO, o aumento de OD foi obtido com a presença de H2O2 e luz UV -A, resultando na remoção de cor do efluente. À eficiência do sistema, determinou que o reagente Foto Fenton é uma excelente alternativa para o tratamento de efluentes têxteis com altas e baixas cargas orgânicas, reduzindo contaminantes derivados de processos industriais. Fe2 Fe HO H H2O dágua. dágua d água. água d'água sistema laboratório FeSO UVA 40 L1 L 1 L- L1de Lde 1de 100 100% 99 83 83% respectivamente 11 11% pH 3, 3 , 3) 2 Fe+ A, -A orgânicas industriais 4 10 9 8